1. Johdanto
This manual provides essential information for the safe and effective use of your Hi-Spec 58-piece Red 8V USB Electric Power Cordless Drill Driver and Home DIY Tool Kit. Please read these instructions thoroughly before operating the tools and retain this manual for future reference.
Image 1.1: The Hi-Spec 58-piece Red 8V USB Electric Power Cordless Drill Driver and Home DIY Tool Kit.
2. Sisältö
Your Hi-Spec 58-piece Red 8V USB Electric Power Cordless Drill Driver and Home DIY Tool Kit includes the following components:
- 1 x 8 V akkuporakone/ruuvinväännin
- 13x Poranterät
- 1x Bit Driver Handle with Adaptor
- 10x Full Size Driver Bits
- 12x Precision Driver Bits
- 2x Full-size Screwdrivers
- 8x Hex Key Wrench Set
- 1x Claw Hammer
- 1x Mittanauha
- 1x taso
- 1x Utility Knife
- 1x Wall Hanging Kit (assorted fasteners)
- 1x Long Needle Nose Pliers
- 1x työkalulaatikko
- 1x USB Charging Lead
Image 2.1: All components of the Hi-Spec 58-piece tool kit.
3. Turvallisuustiedot
Always observe basic safety precautions when using power tools and hand tools to reduce the risk of injury.
Yleiset turvallisuussäännöt:
- Käytä asianmukaisia henkilönsuojaimia such as safety glasses, gloves, and hearing protection.
- Pidä työalueesi puhtaana ja hyvin valaistuna. Sotkuiset tai tummat alueet aiheuttavat onnettomuuksia.
- Älä käytä sähkötyökaluja räjähdysvaarallisissa tiloissa, kuten syttyvien nesteiden, kaasujen tai pölyn läsnä ollessa.
- Pidä lapset ja sivulliset loitolla kun käytät sähkötyökalua. Häiriöt voivat johtaa siihen, että menetät hallinnan.
- Store idle tools out of reach of children and other untrained persons.
Sähköturvallisuus:
- Vältä kehon kosketusta maadoitettuihin pintoihin kuten putket, patterit, liesi ja jääkaapit. Sähköiskun vaara on lisääntynyt, jos kehosi on maadoitettu.
- Älä altista sähkötyökaluja sateelle tai märille olosuhteille. Sähkötyökaluun pääsevä vesi lisää sähköiskun vaaraa.
- Use the provided USB charging lead. Älä käytä luvattomia latureita.
Henkilökohtainen turvallisuus:
- Pysy valppaana, katso mitä olet tekemässä ja käytä maalaisjärkeä when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
- Pukeudu kunnolla. Älä käytä väljiä vaatteita tai koruja. Pidä hiuksesi ja vaatteet poissa liikkuvista osista.
- Kiinnitä työkappale. Käytä clamptai ruuvipenkkiä työkappaleen pitämiseen. Tämä on turvallisempaa kuin käsin työskentely ja vapauttaa molemmat kädet työkalun käyttämiseen.
4. Asennus
4.1 Charging the 8V Cordless Drill Driver
- Locate the USB charging port on the drill driver.
- Connect the provided USB charging lead to the drill driver's charging port.
- Plug the other end of the USB charging lead into any standard USB-powered port (e.g., wall adapter, computer, power bank).
- The battery indicator light will show charging status. A full charge typically takes 3-5 hours for the 1500mAh Li-ion battery.
- Irrota laturi, kun akku on latautunut täyteen.
4.2 Poran/ruuvimeisselin terien asettaminen
- Ensure the drill driver is turned off and the forward/reverse switch is in the center (locked) position to prevent accidental starting.
- Twist the chuck counter-clockwise to open the jaws of the chuck.
- Insert the desired drill bit or screwdriver bit into the chuck, ensuring it is seated firmly.
- Twist the chuck clockwise to tighten the jaws securely around the bit. Ensure the bit is centered and held tightly to prevent slippage during operation.
Image 4.1: Precision bit adapter and various bits for the drill driver.
5. Käyttöohjeet
5.1 Using the 8V Cordless Drill Driver
The 8V Cordless Drill Driver is designed for drilling into wood, plastics, and soft metals, and for driving screws. It is not suitable for drilling into concrete, brick, tile, or hard metals.
- Select the correct bit: Choose the appropriate drill bit for the material and hole size, or the correct screwdriver bit for the fastener.
- Set the direction: Use the forward/reverse switch to select the desired rotation direction (forward for drilling/driving, reverse for removing screws). Ensure it is in the forward position for most tasks.
- Position the drill: Place the tip of the bit on the workpiece where you intend to drill or drive.
- Start drilling/driving: Press the trigger switch to start the drill. The drill features a variable speed trigger, allowing you to control the speed (up to 300 RPM) by how much you depress the trigger. A built-in LED light will illuminate the work area.
- Käytä painetta: Apply steady, even pressure in line with the drill bit. Avoid excessive force, which can damage the bit or the workpiece.
- Complete the task: Continue until the hole is drilled to the desired depth or the screw is fully driven. Release the trigger to stop the drill.
Image 5.1: Features of the 8V Cordless Drill Driver.
Image 5.2: The drill driver in use, highlighting its lightweight and cordless design.
5.2 Käsityökalujen käyttö
The kit includes a variety of hand tools for common household tasks:
- Kynsivasara: Used for driving nails and prying out nails. Ensure a firm grip and strike squarely.
- Long Needle Nose Pliers: Ideal for gripping small objects, bending wire, and reaching into tight spaces.
- Screwdrivers (Full-size and Precision): Use the correct tip (Phillips, flathead, etc.) and size for the screw head to prevent stripping.
- Hex Key Wrench Set: Used for tightening or loosening hexagonal socket screws. Select the correct size for the fastener.
- Mittanauha: For accurate measurements of length and distance.
- Taso: Used to determine if a surface is horizontal (level) or vertical (plumb).
- Yleisveitsi: For cutting various materials. Always use with caution, extend the blade only as needed, and retract it when not in use.
Image 5.3: Essential hand tools in use for maintenance and repair.
6. Huolto
Proper maintenance ensures the longevity and safe operation of your tools.
- Puhdistus: After each use, wipe down all tools with a clean, dry cloth to remove dust, dirt, and debris. For stubborn grime, a slightly damp liinaa voidaan käyttää, minkä jälkeen se kuivataan välittömästi.
- Varastointi: Store all tools in the provided toolbox in a dry, cool place, away from direct sunlight and moisture. Ensure the drill driver's battery is partially charged (not fully depleted or fully charged for extended storage).
- Tarkastus: Periodically inspect tools for wear, damage, or loose parts. Replace damaged bits or tools immediately.
- Akun hoito: Do not expose the battery to extreme temperatures. Do not attempt to disassemble the battery pack.
7. Vianmääritys
If you encounter issues with your Hi-Spec tool kit, refer to the following common troubleshooting steps:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Drill driver does not turn on. | Akku on tyhjä. | Lataa akku täyteen (katso kohta 4.1). |
| Eteen-/taaksepäin-kytkin on keskiasennossa (lukittu). | Move the switch to the forward or reverse position. | |
| Bit slips in the chuck. | Chuck is not tightened sufficiently. | Ensure the chuck is tightened securely around the bit (refer to Section 4.2). |
| Terän varsi on likainen tai vaurioitunut. | Puhdista tai vaihda terä. | |
| Drill driver lacks power. | Akku on vähissä. | Lataa akku uudelleen. |
| Attempting to drill into unsuitable material. | The drill is not for concrete, brick, tile, or hard metal. Use appropriate tools for these materials. |
If the problem persists after attempting these solutions, please contact Hi-Spec customer support for further assistance.
8. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Merkki | Hi-Spec |
| Mallinumero | 30336 |
| Virtalähde | Paristokäyttöinen |
| Voitage | 8 volttia |
| Akun kapasiteetti | 1500 miljoonaaamp Hours (Li-ion) |
| Suurin pyörimisnopeus | 300 rpm (muuttuva nopeus) |
| Suurin vääntömomentti | 8 Newton metriä |
| Suurin istukan koko | 10 millimetriä |
| Porauskapasiteetti (puu) | 0.39 tuumaa |
| Materiaali | Metallia, Muovia |
| Tuotteen paino | 5.54 puntaa (2.52 kiloa) |
| Tuotteen mitat | 157.48"L x 39.37"W x 118.11"H (approximate case dimensions) |
| UPC | 884540162264 |
9. Takuu ja tuki
Takuutiedot:
Hi-Spec provides the following limited warranty periods for components of this tool kit:
- Käsityökalut: Lifetime of the tool
- Power Tools (Drill Driver): 3 vuotta
- Akut ja laturit: 1 vuosi
Säilytä ostokuitti takuuvaatimuksia varten.
Asiakastuki:
For any questions, technical assistance, or warranty claims, please contact Hi-Spec customer support. Refer to the contact information provided with your product packaging or visit the official Hi-Spec websivusto tukitietojen saamiseksi.
