Fanvil WB101

Fanvil WB101 Wallmount Bracket Instruction Manual

For Fanvil X1S, X1SP, X3S, X3SP, X3SG, X3U Phones

1. Johdanto

This manual provides comprehensive instructions for the installation and use of the Fanvil WB101 Wallmount Bracket. This bracket is designed to securely mount compatible Fanvil X-series IP phones to a wall, optimizing desk space and improving accessibility. Please read this manual thoroughly before installation to ensure proper setup and safe operation.

2. Turvallisuustiedot

3. Pakkauksen sisältö

Please check the package contents upon opening. If any items are missing or damaged, contact your vendor.

4. Asennus ja asennus

Follow these steps to install the Fanvil WB101 Wallmount Bracket and attach your Fanvil X-series phone.

4.1. Mounting the Bracket to the Wall

  1. Valitse sijainti: Choose a suitable wall location that is structurally sound and allows for easy access to the phone.
  2. Merkitse porauspisteet: Hold the WB101 bracket against the wall at the desired height. Use a pencil to mark the positions for the mounting screws through the designated holes on the bracket.
  3. Poraa reikiä: Using an appropriate drill bit for your wall type (e.g., masonry for concrete, wood bit for studs), drill pilot holes at the marked locations. If drilling into drywall without a stud, insert wall anchors into the drilled holes.
  4. Kiinnitä teline: Align the bracket with the drilled holes and secure it to the wall using the provided mounting screws. Ensure the bracket is level and firmly attached.
Takaosa view of the Fanvil WB101 wallmount bracket showing keyholes and mounting points.
Kuva 1: Takaosa view of the Fanvil WB101 Wallmount Bracket. This image displays the keyhole slots for wall mounting at the top and bottom, along with additional screw points and clips designed to secure a compatible Fanvil phone.

4.2. Attaching the Phone to the Bracket

The Fanvil WB101 bracket is compatible with Fanvil X1S, X1SP, X3S, X3SP, X3SG, and X3U phones.

  1. Remove Phone Stand: If your Fanvil phone has a desktop stand attached, remove it according to your phone's instructions.
  2. Align Phone: Carefully align the mounting points on the back of your Fanvil phone with the corresponding clips and slots on the WB101 wallmount bracket.
  3. Suojattu puhelin: Gently slide the phone onto the bracket until it clicks into place or is firmly seated. Ensure all clips engage properly. Some phone models may require a screw to further secure the phone to the bracket (refer to your phone's manual for specific details).
  4. Kaapelin hallinta: Route any necessary cables (e.g., Ethernet, power) through the designated openings on the bracket or phone to maintain a tidy appearance.

5. Käyttö

Once installed, the Fanvil WB101 bracket securely holds your compatible Fanvil IP phone on the wall. This frees up desk space and positions the phone for convenient use in various environments such as offices, reception areas, or common spaces. Ensure all cables are properly connected to the phone for full functionality.

6. Huolto

7. Vianmääritys

8. Tekniset tiedot

MalliFanvil WB101
MerkkiFanvil
Yhteensopivat laitteetFanvil X1S, X1SP, X3S, X3SP, X3SG, X3U IP Phones
AsennustyyppiSeinäkiinnitys, pintakiinnitys
VäriMusta
Tuotteen paino4.6 unssia (130 grammaa)
Pakkauksen mitat5.51 x 5.35 x 2.13 tuumaa
ErikoisominaisuudetTilaa säästävä

9. Takuu ja tuki

For warranty information and technical support, please refer to the documentation provided with your Fanvil phone or visit the official Fanvil website. Contact your vendor or Fanvil customer service for assistance with product-related inquiries or issues.