CERSANIT Colour Duroplast Soft Close -WC-istuimen käyttöohje

1. Johdanto

Thank you for choosing the CERSANIT Colour Duroplast Soft-Close Toilet Seat. This product is designed for comfort, hygiene, and durability, featuring a robust Duroplast material, an antibacterial surface, and a convenient soft-close mechanism. This manual provides essential information for proper installation, operation, and maintenance to ensure long-lasting performance.

2. Turvallisuustiedot

Lue kaikki ohjeet huolellisesti ennen asennusta ja käyttöä. Säilytä tämä käyttöohje myöhempää tarvetta varten.

• Varmista, että kaikki osat ovat mukana ja vahingoittumattomia ennen asennuksen aloittamista.
• Do not use abrasive cleaners or harsh chemicals, as these can damage the surface and antibacterial coating.
• Avoid standing on the toilet seat or lid, as this may cause damage or injury.
• Pidä pienet osat poissa lasten ulottuvilta tukehtumisvaaran välttämiseksi.

3. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki seuraavat osat:

• CERSANIT Colour Duroplast Toilet Seat with Lid
• Mounting Hardware (hinges, screws, washers, nuts)

4. Asennusohjeet

Follow these steps for proper installation of your CERSANIT toilet seat. While installation is generally straightforward, some adjustments may be required for a perfect fit.

1. Valmistele wc-pönttö: Ensure the toilet bowl's mounting holes are clean and free from any old residue.
2. Attach Hinges to Toilet Bowl: Insert the mounting bolts through the toilet bowl holes. Place the washers and nuts onto the bolts from underneath the bowl. Do not fully tighten yet.
3. Istuimen asento: Align the toilet seat's hinge posts with the attached mounting hardware. The seat should slide onto the posts.
4. Säädä ja kiristä: With the seat in place, adjust its position to ensure it is centered and aligned with the toilet bowl. Once satisfied with the alignment, carefully tighten the nuts from underneath the toilet bowl. Ensure the seat remains aligned as you tighten.
5. Testaa pehmeän sulkeutumisen toiminto: Gently lower the seat and lid to confirm the soft-close mechanism operates smoothly.

5. Käyttöohjeet

5.1 Pehmeä sulkeutumismekanismi

The CERSANIT toilet seat is equipped with a soft-close feature, designed for quiet and gentle closing. Simply push the seat or lid down slightly, and it will lower slowly and silently on its own, preventing slamming and reducing wear and tear.

5.2 Easy-Off Function

For thorough cleaning or maintenance, the seat can be easily removed. Locate the quick-release buttons or levers near the hinges (specific design may vary). Press or lift these mechanisms to detach the seat from the mounting posts. Reattach by aligning the seat with the posts and pressing down until it clicks into place.

6. Huolto ja puhdistus

Regular cleaning and proper maintenance will extend the life of your toilet seat and maintain its hygienic properties.

• Päivittäinen siivous: Use a soft cloth with mild soap and water. Wipe the entire surface of the seat and lid.
• Antibakteerinen pinta: The Duroplast material has an integrated antibacterial property. To maintain this, avoid harsh chemical cleaners, especially those containing chlorine or abrasive particles, as they can degrade the surface.
• Perusteellinen puhdistus: Utilize the Easy-Off function to remove the seat for cleaning hard-to-reach areas around the hinges and toilet bowl.
• Kuivaus: Kuivaa istuin ja saranat aina huolellisesti puhdistuksen jälkeen vesitahrojen välttämiseksi ja hygienian ylläpitämiseksi.

7. Vianmääritys

If you encounter any issues with your CERSANIT toilet seat, refer to the following common problems and solutions:

• Ongelma: The toilet seat feels loose or shifts during use.
  Ratkaisu: The mounting nuts underneath the toilet bowl may have loosened. Remove the seat using the Easy-Off function, then re-tighten the mounting nuts securely. Reattach the seat and test for stability.
• Ongelma: The soft-close mechanism is not working correctly or the seat slams.
  Ratkaisu: Ensure the hinges are clean and free from debris. If the issue persists, the soft-close mechanism might be damaged. Contact customer support for assistance.
• Ongelma: Difficulty in aligning the seat during installation.
  Ratkaisu: Ensure the mounting bolts are not fully tightened until the seat is placed and adjusted. Loosen the nuts slightly, adjust the seat's position, and then tighten them evenly.

8. Tekniset tiedot

9. Takuu ja tuki

CERSANIT products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the terms and conditions provided at the point of purchase or contact your retailer. For technical support or further assistance, please reach out to the CERSANIT customer service department or your local distributor.