Steinel 58678

Steinel LED-spot Way N with Twilight Sensor Instruction Manual

Malli: 58678

Johdanto

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinel LED-spot Way N with Twilight Sensor. Please read these instructions carefully before use and retain them for future reference.

The Steinel LED-spot Way N is an IP44-rated outdoor path light designed to provide reliable illumination for driveways, access paths, and garden areas. It features an integrated twilight sensor for automatic operation and an adjustable spotlight head for precise light direction.

Turvallisuusohjeet

  • Sähköturvallisuus: Installation must be performed by a qualified electrician in accordance with national wiring regulations. Ensure the power supply is disconnected before installation or maintenance.
  • Voitage: This product operates on 220 - 240 V / 50 - 60 Hz AC mains power.
  • Suojausluokka: The device has an IP44 protection rating, making it suitable for outdoor use and protected against splashing water.
  • Lamp Tyyppi: Käytä vain GU10 LED lamps määritellyn mukaisesti. Älä ylitä enimmäistehoatage of 9W for replacement GU10 LED lamps.
  • Asennus: Varmista, että kiinnityspinta on vakaa ja kestää kiinnityslaitteen painon.
  • Lapset: Pidä pakkausmateriaalit ja pienet osat poissa lasten ulottuvilta.

Asennus ja asennus

1. Purkaminen

Carefully remove all components from the packaging. Verify that all parts listed in the 'Included Components' section are present and undamaged.

Steinel LED-spot Way N and its components in packaging

Image: The Steinel LED-spot Way N, its GU10 LED lamp, 2.5m power cable with plug, mounting hardware (screws, plugs), and quick start guide, as received in its packaging.

2. Mounting the Spotlight

The LED-spot Way N is designed for easy floor mounting. Choose a suitable location on a stable surface, such as a patio, pathway, or garden area.

  1. Position the base of the spotlight at the desired location.
  2. Mark the drilling points through the holes in the base.
  3. Drill holes at the marked positions. Insert the provided wall plugs if mounting into masonry or concrete.
  4. Secure the spotlight base to the surface using the supplied screws.

3. Virran kytkeminen

The spotlight comes with a pre-installed 2.5-meter power cable and plug for convenient connection to a standard outdoor power outlet.

2.5 meter power cable with plug for Steinel LED-spot Way N

Image: The included 2.5-meter power cable with a standard European plug, ready for connection to an outdoor power source.

  1. Ensure the power outlet is suitable for outdoor use and has appropriate weather protection.
  2. Plug the power cable into the outdoor outlet.
  3. Ensure the cable is routed safely to prevent tripping hazards and damage.

4. Lamp Asennus/Vaihto

The spotlight includes a replaceable GU10 LED lamp. To install or replace the lamp:

  1. Varmista, että virtalähde on irrotettu.
  2. Carefully twist and remove the front cover of the spotlight.
  3. Insert the GU10 LED lamp into the socket, aligning the pins, and twist to secure it.
  4. Replace the front cover, ensuring it is securely fastened to maintain the IP44 rating.

Käyttöohjeet

1. Automatic Twilight Sensor (NightAutomatic)

The Steinel LED-spot Way N features a NightAutomatic function, which means the light will automatically turn on when ambient light levels fall below a set threshold and turn off when it becomes bright enough. This ensures continuous illumination after sunset.

Steinel LED-spot Way N path lights illuminating a pathway at dusk

Image: Multiple Steinel LED-spot Way N lights providing consistent illumination along an outdoor pathway during twilight hours.

2. Adjusting the Twilight Sensor

The twilight sensor sensitivity can be adjusted directly on the spotlight to suit your specific needs (2-1000 lux).

  1. Locate the adjustment dial or switch for the twilight sensor on the fixture.
  2. Turn the dial to increase or decrease the lux threshold. A lower lux setting means the light will turn on earlier in dimmer conditions, while a higher setting means it will turn on later when it's darker.
  3. Test the setting by observing the light's behavior at dusk and dawn.

3. Adjusting the Spotlight Head

The spotlight head offers flexibility in directing the light beam.

Steinel LED-spot Way N spotlight head with arrows indicating adjustment range

Image: Close-up of the Steinel LED-spot Way N's adjustable head, showing its capability to rotate horizontally and vertically for precise light positioning.

  • The spotlight head can be rotated 180° vaakasuunnassa.
  • It can also be tilted 90° pystysuunnassa.
  • Gently adjust the head to illuminate your desired area, such as a path, plant, or architectural feature.

Huolto

1. Puhdistus

To maintain the appearance and performance of your spotlight:

  • Ensure the power supply is disconnected before cleaning.
  • Pyyhi kiinnityslaite pehmeällä, damp kangas.
  • Do not use abrasive cleaners, solvents, or high-pressure washers, as these can damage the finish or internal components.
  • Regularly clean the twilight sensor lens to ensure accurate light detection.
Rain cloud icon indicating weather resistance

Image: An icon depicting a rain cloud, symbolizing the IP44 weather resistance of the product, which protects it from splashing water.

2. Lamp Vaihto

Refer to the 'Lamp Installation/Replacement' section under Setup for detailed instructions on how to replace the GU10 LED lamp.

Vianetsintä

OngelmaMahdollinen syyRatkaisu
Valo ei syty.Ei virtalähdettä.Check the power outlet and circuit breaker. Ensure the plug is fully inserted.
Faulty GU10 LED lamp.Replace the GU10 LED lamp.
Twilight sensor setting is too high (light thinks it's still bright).Adjust the twilight sensor sensitivity to a lower lux value.
Valo palaa päivän aikana.Twilight sensor setting is too low (light thinks it's still dark).Adjust the twilight sensor sensitivity to a higher lux value.
Anturin linssi on likainen tai peittynyt.Clean the sensor lens and remove any obstructions.

Tekniset tiedot

OminaisuusErittely
Mallinumero58678
Mitat (P x L x K)226 x 140 x 572 mm
Paino1.23 kg
Verkkoliitäntä220 - 240 V / 50 - 60 Hz
Virrankulutus7.86 W
Valovirta512 lumens (fixture), 620 lumens (included GU10 lamp)
Värilämpötila3000 K (lämmin valkoinen)
SuojausluokkaIP44
MateriaaliAlumiini
ValmisPowder-coated (Anthracite)
Twilight Sensor Range2–1000 luksia
Kohdevalojen pään säätö180 ° vaakasuora, 90 ° pystysuora
Mukana Lamp TyyppiGU10 LED (replaceable, max 9W)
EnergiatehokkuusluokkaF

Takuutiedot

Steinel products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Steinel websivusto. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.

Asiakastuki

If you encounter any issues or have questions regarding your Steinel LED-spot Way N that are not covered in this manual, please contact Steinel customer support. You can find contact details on the official Steinel websivustoltasi tai jälleenmyyjän kautta.

Verkkoresurssit: For additional information, product registration, or FAQs, please visit the Steinel official websivusto.

Aiheeseen liittyvät asiakirjat - 58678

Preview STEINEL NightmatIQ & NightmatIQ Plus Dämmerungsschalter Bedienungsanleitung | Asennus ja toiminta
Umfassende Anleitung für STEINEL NightmatIQ und NightmatIQ Plus Dämmerungsschalter. Erfahren Sie mehr über Installation, Funktionen, Manuelle und App-gesteuerte Einstellungen für Ihre Außenbeleuchtung.
Preview STEINEL L 605 S / L 605 LED Sensorleuchte - Bedienungsanleitung
Umfassende Bedienungsanleitung für die STEINEL L 605 S ja L 605 LED Sensorleuchten. Erfahren Sie mehr über Installation, Funktionen, Sicherheitshinweise und Fehlerbehebung für diese Innen- und Außenleuchten mit Bewegungsmelder.
Preview Steinel NightmatIQ ja NightmatIQ Plus -pikaopas | Hämäräanturit
Steinel NightmatIQ- ja NightmatIQ Plus -hämärätunnistimien pika-aloitusopas. Opi asennuksesta, teknisistä tiedoista ja älykkään valaistuksenohjauksen ominaisuuksista.
Preview Steinel XLED CAM 1 SC käyttöohje ja asennusopas
Kattava opas Steinel XLED CAM 1 SC -tunnistinkytkimellä varustetulle LED-valonheittimelle, joka kattaa asennuksen, konfiguroinnin, käytön ja vianetsinnän. Opi sen ominaisuuksista, teknisistä tiedoista ja käytöstä Steinel CAM -sovelluksen kautta.
Preview Steinel CAM App Installationsanleitung
Eine detaillierte Installationsanleitung für die Steinel CAM-App, die Schritt für Schritt erklärt, wie Ihre Steinel CAM-Sicherheitskamera einrichten, mit Ihrem WLAN verbinden und bedienen. Enthält Anleitungen zur matage, App-Einrichtung und Fehlerbehebung.
Preview STEINEL LS 150 S / LS 150 LED-Strahler mit Bewegungsmelder - Bedienungsanleitung
Umfassende Bedienungsanleitung für den STEINEL LS 150 S ja LS 150 LED-Strahler mit Bewegungsmelder. Enthält Installationsanweisungen, Sicherheitshinweise, Funktionserklärung und Fehlerbehebung.