1. Tuote ohiview
The Einhell CE-BC 6 M is an intelligent, microprocessor-controlled battery charger designed for a wide range of 12V vehicle battery types, including gel, AGM, and maintenance-free/low-maintenance lead-acid batteries. This advanced charger features a multi-stage charging cycle, automatic voltage adaptation (12V), and specialized modes for optimal battery care. Its intelligent electronics analyze the connected battery's type and condition to initiate the most suitable charging process, ensuring a gentle and efficient charge for extended battery life.
Key features include a maintenance charge function to prevent deep discharge, a Winter Mode for charging below 5°C, a Recondition Mode for deeply discharged batteries, and a Power Supply Mode. The unit is equipped with comprehensive safety protections against overload, short circuits, and reverse polarity, safeguarding both the charger and the battery. An LCD display provides real-time information on battery voltage ja latauksen edistyminen.
Figure 1: Einhell CE-BC 6 M Battery Charger. The device is predominantly red and black, featuring an LCD display that shows '13.4V' and a battery charge indicator. Attached are red and black insulated battery clamps, ready for connection. The top of the unit has a black hanging eyelet for convenient storage.
2. Turvallisuusohjeet
Before operating the Einhell CE-BC 6 M battery charger, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Henkilökohtainen turvallisuus: Always wear eye protection and protective clothing when working with batteries. Batteries can produce explosive gases.
- Ilmanvaihto: Ensure the charging area is well-ventilated. Do not operate the charger in a confined space.
- Syttyvät materiaalit: Pidä kipinät, liekit ja savuavat materiaalit poissa akusta ja laturista.
- Akun tyyppi: This charger is designed for 12V lead-acid, gel, and AGM batteries. Do not attempt to charge non-rechargeable batteries or batteries with different voltage arvosanat.
- Frozen Batteries: Never attempt to charge a frozen battery. Allow it to thaw before charging.
- Liitännät: Always connect the charger to the battery before plugging it into the mains power supply. Disconnect from the mains before disconnecting the battery.
- Vaurioituneet laitteet: Do not operate the charger if the power cord, clamps, or charger unit itself is damaged. Contact qualified service personnel for repair.
- Lapset ja lemmikit: Pidä laturi ja akku poissa lasten ja lemmikkien ulottuvilta.
- Käänteinen napaisuus: The charger has reverse polarity protection, but always double-check connections to prevent damage.
3. Asennus ja valmistelu
- Pura pakkauksesta: Poista laturi ja kaikki lisävarusteet varovasti pakkauksesta.
- Tarkastaa: Tarkista laturi, kaapelit ja johtoamps vaurioiden varalta. Älä käytä, jos tuote on vaurioitunut.
- Ilmanvaihto: Aseta laturi hyvin ilmastoituun tilaan, poissa suorasta auringonvalosta, lämmönlähteistä ja kosteudesta.
- Akun valmistelu:
- For conventional lead-acid batteries, check the electrolyte level and top up with distilled water if necessary (do not overfill).
- Clean the battery terminals to ensure good electrical contact.
- Ensure the battery is not frozen.
- Asennus (valinnainen): The charger housing includes an eyelet for wall mounting, allowing for convenient storage and use.
4. Käyttöohjeet
4.1. Laturin kytkeminen
- Yhdistä positiivisesti: Attach the red (+) battery clamp akun positiiviseen (+) napaan.
- Yhdistä negatiivinen: Attach the black (-) battery clamp akun negatiiviseen (-) napaan.
- Connect to Mains: Plug the charger's power cord into a standard 230V AC wall outlet. The charger will power on and perform an initial self-check.
4.2. Lataustilan valitseminen
The Einhell CE-BC 6 M automatically detects the battery type and condition. Use the mode button (if present, or refer to the display for automatic selection) to cycle through available modes if manual selection is required for specific functions.
- Vakiohinta: The charger will automatically select the appropriate multi-stage charging cycle for 12V batteries.
- Talvitila (alle 5 °C): Activates a specialized charging curve for optimal performance in cold temperatures.
- Kunnostustila: Designed to revive deeply discharged batteries. This mode applies a specific charging profile to attempt recovery.
- Virtalähdetila: Allows the charger to function as a stable 12V power supply, useful for maintaining vehicle electronics during battery changes or diagnostics.
4.3. Monitoring the Charging Process
LCD-näyttö tarjoaa reaaliaikaista tietoa:
- Akku Voltage: Näyttää nykyisen äänenvoimakkuudentage liitetystä akusta.
- Latauksen edistyminen: Osoittaa nykyisen stage of the charging cycle.
- Tilan ilmaisin: Displays the active charging mode (e.g., Winter, Recondition).
- Akun tila: A graphical representation of the battery's charge level.
The charger will automatically switch to maintenance charge mode once the battery is fully charged, preventing overcharging and maintaining optimal battery health.
4.4. Laturin irrottaminen
- Disconnect Mains: Unplug the charger's power cord from the wall outlet.
- Disconnect Negative: Detach the black (-) battery clamp from the negative (-) terminal of the battery.
- Disconnect Positive: Detach the red (+) battery clamp from the positive (+) terminal of the battery.
5. Huolto ja varastointi
- Puhdistus: Disconnect the charger from the mains and battery before cleaning. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- Kaapelin tarkastus: Regularly inspect the power cord and battery cables for any signs of damage, fraying, or exposed wires. Replace damaged cables immediately.
- Clamp Hoito: Pidä akku puhtaanaampon puhdas ja korroosioton hyvän sähköisen kontaktin varmistamiseksi.
- Varastointi: Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure cables are neatly coiled and not kinked.
- Pitkäaikaissäilytys: If the charger is not used for an extended period, ensure it is stored in its original packaging or a protective container.
6. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Laturi ei käynnisty. | No power from mains outlet. Vaurioitunut virtajohto. | Tarkista pistorasia toisella laitteella. Inspect power cord for damage; do not use if damaged. |
| Akku ei lataudu. | Virheellinen akun liitäntä. Battery is severely discharged or faulty. Väärä tila valittu. | Varmista, että clamps are securely connected to correct terminals. Try Recondition Mode for deeply discharged batteries. If still no charge, battery may be beyond recovery. Verify the correct charging mode is active on the LCD display. |
| "Error" or warning on display. | Käänteinen napaisuus. Oikosulku. Ylikuormitus. | Disconnect from mains, then reconnect clamps correctly (red to +, black to -). Check for short circuits in cables or clamps. Ensure battery capacity is within charger's specifications. |
| Laturi lämpenee käytön aikana. | Normaali toiminta. | A slight increase in temperature is normal during charging. Ensure adequate ventilation. If excessively hot, disconnect and contact support. |
7. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Merkki | Einhell |
| Mallinumero | 1002235 (CE-BC 6 M) |
| Tulo Voltage | 120 volttia (AC) |
| Lähtö Voltage | 12 volttia (DC) |
| Latausvirta | 6 Amperes |
| Yhteensopivat akkutyypit | Lead-acid, Gel, AGM (12V) |
| Mitat (P x L x K) | 34 cm x 15 cm x 8 cm |
| Tuotteen paino | 1.32 paunaa (noin 0.6 kg) |
| Liittimen tyyppi | Akku Clamps |
| Kansainvälinen tuotekoodi (EAN) | 04006825640328 |
8. Takuu ja tuki
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell websivusto.
It is recommended to register your product for warranty purposes, which may extend the warranty period (e.g., to 3 years as mentioned in some product information). Keep your proof of purchase for any warranty claims.
Asiakastuki
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Contact details can typically be found on the official Einhell websivustolla tai tuotedokumentaatiossa.
Kun otat yhteyttä tukeen, pidä seuraavat tiedot käsillä:
- Product Model: CE-BC 6 M
- Tuotenumero: 1002235
- Ostopäivämäärä
- ongelman kuvaus
