1. Tuote ohiview
The Hi-Spec 12V Cordless Drill Set is designed for light drilling and fast screw driving tasks around the home and garage. This versatile tool comes with a comprehensive set of drill bits and driver bits, all conveniently stored in a durable toolbox case.
Image 1.1: The Hi-Spec 12V Cordless Drill Set, showcasing the drill, battery, charger, and various drill and screwdriver bits, all neatly organized within its robust carrying case.
2. Pakkauksen sisältö
Varmista, että pakkauksessasi on kaikki alla luetellut tuotteet:
- 1 x Hi-Spec 12V Cordless Drill Driver
- 1 x 12V 1300mAh Li-ion Rechargeable Battery
- 1 x seinälaturi
- 1 x Compact Blow Mold Carrying Case
- 5 x HSS Metal Drill Bits (various sizes)
- 5 x Brad Point Wood Drill Bits (various sizes)
- 5 x Masonry Drill Bits (various sizes)
- 29 x Screwdriver Bits (Hex, Torx, Phillips, Slotted, Pozi, Square)
- 2 x Spade Wood Drill Bits (1/2" and 5/8" flat)
Image 2.1: A detailed breakdown of the 50-piece set, highlighting the cordless drill, various HSS, masonry, and wood drill bits, along with the 29-piece screwdriver bit set.
3. Asennus ja käyttöönotto
3.1 Akun lataus
Before first use, fully charge the 12V 1300mAh Li-ion battery. Connect the included wall charger to the battery and plug it into a standard electrical outlet. The battery typically charges in 3 to 5 hours.
3.2 Akun kiinnitys
Align the battery with the base of the drill handle and slide it in until it clicks securely into place. To remove, press the battery release button (if present) and slide the battery out.
3.3 Poran/ruuvimeisselin terien asettaminen
- Kierrä istukkaa vastapäivään avataksesi leuat.
- Insert the desired drill bit or screwdriver bit into the chuck, ensuring it is seated firmly.
- Rotate the chuck clockwise to tighten the jaws securely around the bit. Ensure the bit is centered and cannot be pulled out easily.
Image 3.1: The Hi-Spec 12V Cordless Drill and its accessories, including the charger, neatly stored within the custom-fit carrying case, ready for transport or storage.
4. Käyttöohjeet
4.1 Muuttuvanopeuksinen liipaisin
The drill features a variable speed trigger. Press the trigger gently for lower speeds (up to 350 RPM) for precision screwdriving or starting holes. Press the trigger further for higher speeds (up to 1350 RPM) for rapid drilling.
4.2 Direction Switch (Forward/Reverse)
A switch located above the trigger controls the rotation direction. Push it to the left for forward (clockwise) rotation for drilling and driving screws. Push it to the right for reverse (counter-clockwise) rotation for removing screws or backing out bits.
4.3 Vääntömomenttiasetukset
The drill features 18 torque settings, allowing you to adjust the amount of rotational force applied. Lower settings are ideal for driving small screws into soft materials to prevent overtightening or stripping. Higher settings provide more power for larger screws or drilling. The maximum torque is 15 Newton Meters (Nm).
4.4 LED-työvalo
A built-in LED light illuminates the work area when the trigger is pressed, improving visibility in dimly lit spaces.
Image 4.1: Key features of the drill, including the 18 torque settings, LED work light, variable speed trigger, ergonomic TPR grip, and battery release mechanism.
4.5 Sovellukset
This drill is suitable for:
- Drilling into wood, plastic, drywall/plasterboard, ceramics, and soft metals.
- Driving and removing screws for assembling furniture, installing shelves, hanging frames, and other light-duty fastening tasks.
Tärkeä huomautus: Tämä pora on ei suited for drilling into hardened metals, brick, concrete, porcelain, or floor tiles. Using it on these materials may damage the tool or the material.
Image 4.2: The cordless drill in action, demonstrating its use for drilling into wood, a common DIY application.
Image 4.3: The cordless drill being used to drive a screw into a wooden fence post, illustrating its utility for fastening tasks.
5. Huolto
5.1 Puhdistus
Regularly clean the drill and its accessories. Use a dry cloth to wipe away dust and debris. Do not use harsh chemicals or abrasive cleaners. Keep the ventilation openings clear to prevent overheating.
5.2 Akun hoito
To prolong battery life, avoid fully discharging the battery before recharging. Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery to approximately 50% capacity.
5.3 Bit Care and Storage
After use, clean any debris from the drill bits and screwdriver bits. Store all components in the provided toolbox case to protect them from damage and loss.
6. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Porakone ei käynnisty. | Akku ei ole latautunut tai se ei ole asetettu oikein paikalleen. | Varmista, että akku on ladattu täyteen ja että se on napsahtanut tukevasti paikalleen. |
| Porakoneesta puuttuu tehoa tai se pysähtyy käytön aikana. | Akun varaus on vähissä. | Lataa akku uudelleen. |
| Terä luistaa istukassa. | Istukka ei ole kiristetty tarpeeksi tai terän varsi on likainen. | Tighten chuck firmly. Clean bit shank before inserting. |
| Ylikuumeneminen käytön aikana. | Pitkäaikainen raskas käyttö tai tukkeutunut ilmanvaihto. | Allow drill to cool down. Ensure ventilation slots are clear. Avoid excessive pressure. |
7. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Merkki | Hi-Spec |
| Mallinumero | DT30327B |
| Virtalähde | Paristokäyttöinen |
| Voitage | 12 volttia |
| Ampkorotus | 1.3 Amps |
| Suurin pyörimisnopeus | 1350 RPM |
| Suurin vääntömomentti | 15 Newton metriä |
| Suurin istukan koko | 0.38 tuumaa |
| Akun tyyppi | Litium-ioni |
| Akun kapasiteetti | 1300 mAh |
| Latausaika | 3–5 tuntia |
| Nopeuksien määrä | 2 (Muuttuja) |
| Tuotteen paino | 4.38 puntaa (1988 grammaa) |
| Tuotteen mitat | 10.04 x 10.24 x 3.94 tuumaa |
| Mukana olevat komponentit | Drill Bits, Screwdriver Bits, Battery, Charger, Case |
| Materiaali | Metalli |
| Väri | Sininen |
| UPC | 884540160413 |
8. Takuu ja tuki
8.1 Takuutiedot
Hi-Spec warrants all of its products against defective workmanship and faulty materials. Hi-Spec undertakes, at its option, to repair or replace, free of charge, each product thereof from the date of purchase, with conditions, together with a valid purchase order identification number or valid proof of purchase.
- Sähkötyökalut: 3 vuotta
- Akut ja laturit: 1 vuosi
- Käsityökalut: Lifetime of tool
8.2 Asiakastuki
For any questions, technical assistance, or warranty claims, please contact Hi-Spec customer support through the retailer's platform or visit the official Hi-Spec websivusto yhteystiedot.
