ET2 Soji 2-Light LED Linear Pendant Instruction Manual

1. Johdanto

Kiitos ostoksestasiasing the ET2 Soji 2-Light LED Linear Pendant. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

2. Turvallisuustiedot

• Sähköturvallisuus: All electrical connections must be made in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
• Virran katkaisu: Katkaise aina virta päävirtakytkimestä tai sulakekaapista ennen asennuksen aloittamista tai huoltotöiden suorittamista.
• Fixture Handling: Handle the fixture with care. Avoid dropping or striking the glass shades.
• Voitage: This fixture is designed for 120 Volts. Ensure your power supply matches this requirement.
• Vain sisäkäyttöön: This product is intended for indoor use only. Do not install in wet or damp sijainnit.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• ET2 Soji 2-Light LED Linear Pendant Fixture
• Käyttöohje
• Asennuslaitteisto

4. Asennus ja asennus

Professional installation is recommended. Ensure power is disconnected before proceeding.

1. Valmistele asennusalue: Turn off power at the circuit breaker. Clear the area where the pendant will be installed.
2. Asenna katos: The pendant includes a canopy with a diameter of 39.5 x 4.75 x 1.75 inches. Secure the mounting hardware to the junction box in the ceiling. This fixture is adaptable for sloped ceilings.
3. Kytke johdotus: Follow the wiring diagrams provided in the included instruction manual. Connect the fixture's wires to the corresponding household wires (live, neutral, ground).
4. Kiinnitä kiinnitys katolle: Carefully lift the fixture and attach it to the mounted canopy, ensuring all connections are secure.
5. Asenna lasiverhot: Gently attach the satin white glass shades to the fixture.

5. Käyttöohjeet

Once installed and power is restored, the ET2 Soji LED Linear Pendant can be controlled via an app or a remote control, depending on your setup. Refer to the specific instructions provided with your smart control system for pairing and operation details.

• Virta päälle/pois: Use the connected wall switch, remote control, or smart app to turn the light fixture on or off.
• Kirkkauden säätö: If connected to a compatible dimmer system, adjust brightness using the remote control or app.

6. Huolto

Säännöllinen huolto varmistaa riippuvalaisimesi pitkän käyttöiän ja optimaalisen suorituskyvyn.

• Puhdistus: Disconnect power before cleaning. Use a soft, dry cloth to wipe the metal frame and glass shades. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• LED: it: The integrated LED light source has a rated life of 30,000 hours and is not user-replaceable.

7. Vianmääritys

If your pendant light is not functioning correctly, refer to the following common issues and solutions:

8. Tekniset tiedot

9. Takuu ja tuki

The ET2 Soji 2-Light LED Linear Pendant comes with a 2 vuoden rajoitettu valmistajan takuu. Tämä takuu kattaa materiaali- ja valmistusvirheet normaalikäytössä.

For warranty claims or technical support, please contact ET2 customer service. Keep your proof of purchase for warranty validation.