MEAN WELL LPV-100-12 LED Driver Instruction Manual

1. Johdanto

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the MEAN WELL LPV-100-12 LED Driver. This unit is a constant voltage, single output, waterproof power supply designed for LED-related fixtures and appliances. It features a universal AC input and is fully encapsulated with an IP67 rating, making it suitable for various environments.

2. Turvallisuusohjeet

Lue kaikki ohjeet huolellisesti ennen asennusta ja käyttöä. Näiden ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon tai muita vaaroja.

• Pätevä henkilöstö: Asennuksen ja huollon saa suorittaa vain pätevä henkilöstö.
• Virran katkaisu: Katkaise aina virta ennen asennusta, huoltoa tai vianmääritystä.
• Oikea johdotus: Ensure all wiring connections are secure and comply with local electrical codes. Incorrect wiring can cause damage or fire.
• Ilmanvaihto: Although IP67 rated, ensure adequate air circulation around the unit to prevent excessive heat buildup, especially when operating at maximum load.
• Latauksen yhteensopivuus: Älä ylitä määritettyä tehoa (wattia)tage or current. Overloading can damage the driver and connected devices.
• Ympäristöolosuhteet: The IP67 rating indicates suitability for dry and damp locations. Avoid submerging the unit or exposing it to extreme temperatures outside its specified operating range.

3. Tuote ohiview

The LPV-100-12 is a robust LED driver designed for reliable performance in demanding conditions. Its compact form factor and waterproof design make it versatile for various applications.

Kuva 3.1: Kaiken kaikkiaan view of the MEAN WELL LPV-100-12 LED Driver. This image displays the white rectangular housing with input (AC) and output (DC) wires, along with the product label.

Kuva 3.2: Close-up of the product label on the LPV-100-12. The label details input voltage (100-240V~, 2.2A, 50/60Hz), output voltage (+12V === 8.5A), and various certifications including CE, cURus, and IP67.

Kuva 3.3: Product label with the serial number highlighted. The serial number for this unit is GB95522023. This serial number can be used to obtain the Quality Control Inspection Report from MEAN WELL.

4. Asennus ja asennus

Follow these steps for proper installation of the LPV-100-12 LED Driver.

1. Asennus: The unit is designed for wall mount installation. Secure the driver to a stable surface using appropriate fasteners. Ensure the mounting location allows for adequate heat dissipation.
2. Input Wiring (AC):
   • Yhdistä Brown (ACL) wire to the Live (L) AC input.
   • Yhdistä Blue (ACN) wire to the Neutral (N) AC input.
   • Tulo voltage range is 90 ~ 264VAC or 127 ~ 370VDC. Ensure your power source is within this range.
3. Output Wiring (DC):
   • Yhdistä Punainen (V+) wire to the positive (+) terminal of your 12VDC LED fixture.
   • Yhdistä Musta (V-) wire to the negative (-) terminal of your 12VDC LED fixture.
   • Ensure the total power consumption of the connected LED fixtures does not exceed 102 Watts (8.5 Amps at 12VDC).
4. Eristys: After making all connections, ensure all exposed wires are properly insulated to prevent short circuits.
5. Virta päälle: Once all connections are secure and verified, apply power to the AC input.

5. Käyttöohjeet

The MEAN WELL LPV-100-12 is a constant voltage LED driver. Once properly installed and powered, it will provide a stable 12VDC output to the connected LED load.

• Automaattinen toiminta: The driver operates automatically when power is supplied. There are no user-adjustable controls.
• Load Monitoring: Ensure the connected LED load remains within the driver's specified output limits (12VDC, 8.5A, 102W).
• Suojausominaisuudet: The unit includes built-in protections against short circuit, overload, and over voltage. In case of a fault, the driver may temporarily shut down to protect itself and the connected load. Remove the fault condition and cycle power to reset.

6. Huolto

The LPV-100-12 LED Driver is designed for minimal maintenance due to its fully encapsulated, waterproof construction.

• Säännöllinen tarkastus: Periodically inspect the driver and its wiring for any signs of damage, wear, or loose connections.
• Puhdistus: Puhdista tarvittaessa laitteen ulkopinta varovasti pehmeällä,amp liinaa. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita. Varmista, että laite on sammutettu ennen puhdistamista.
• Ympäristötarkastus: Verify that the operating environment remains within the specified temperature range (-25~70℃) and that the IP67 rating is not compromised by physical damage.

7. Vianmääritys

If you encounter issues with your LPV-100-12 LED Driver, refer to the following troubleshooting guide:

8. Tekniset tiedot

Detailed technical specifications for the MEAN WELL LPV-100-12 LED Driver:

9. Takuu ja tuki

For warranty information and technical support, please refer to the official MEAN WELL website or contact your authorized distributor. Keep your purchase receipt and the product's serial number (e.g., GB95522023) for any warranty claims or support inquiries.