APC BV500I-MS Easy UPS User Manual

1. Johdanto

The APC BV500I-MS Easy UPS is an Uninterruptible Power Supply designed to provide power protection for electronic equipment against unstable power conditions, including outages, surges, and spikes. It ensures consistent and reliable power delivery, safeguarding your hardware and data. This manual provides instructions for the proper setup, operation, and maintenance of your Easy UPS.

2. Tuote ohiview

The APC BV500I-MS is a compact and versatile UPS unit. It features Automatic Voltage Regulation (AVR) to correct low and high voltages to safe levels without using battery power, thereby preserving battery life. Its design allows for flexible placement, including upright, flat, or wall-mounted configurations.

Figure 1: APC BV500I-MS Easy UPS front-top view with universal outlets. This image displays the APC BV500I-MS Easy UPS from a top-front angle, highlighting the four universal outlets for connecting devices and the ventilation grilles.

Figure 2: APC BV500I-MS Easy UPS side view with power input. This image shows a side view of the APC BV500I-MS Easy UPS, illustrating the power input cable connection point and additional ventilation.

Figure 3: APC BV500I-MS Easy UPS bottom view with mounting options and data port. This image presents the bottom panel of the APC BV500I-MS Easy UPS, featuring keyhole slots for wall mounting and a data port, likely for communication or monitoring.

3. Turvallisuustiedot

Read these instructions carefully before installing or operating the UPS. Keep this manual for future reference.

• Tämä UPS on tarkoitettu vain sisäkäyttöön.
• Do not operate the UPS in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.
• Varmista, että tuuletusaukot eivät ole tukossa.
• Connect the UPS power cable directly to a wall outlet. Do not use extension cords.
• The battery is not user-replaceable. Refer to qualified service personnel for battery replacement.
• Always disconnect the UPS from the power supply before cleaning or servicing.

4. Asennus

1. Unpack the UPS: Carefully remove the UPS from its packaging and inspect it for any damage.
2. Sijoitus: Position the UPS in a location that allows for adequate ventilation. The slim, modern design allows for upright, flat, or wall-mounted installation. Ensure it is away from direct sunlight, heat sources, and moisture.
3. Yhdistä sähköverkkoon: Plug the UPS power cord into a grounded 230V AC wall outlet. The UPS will begin charging its internal battery. Allow the battery to charge for at least 8 hours before connecting critical equipment to ensure maximum runtime.
4. Kytke laitteet: Plug your electronic devices (e.g., computer, monitor, network gateway) into the universal outlets on the UPS. Ensure that the total power consumption of connected devices does not exceed the UPS's capacity (300W).
5. Virta päälle: Press the power button on the front of the UPS to turn it on. The indicator light will illuminate.

5. Käyttö

5.1 Virta päälle/pois

• Virran kytkeminen: Paina virtapainiketta ja pidä sitä painettuna, kunnes merkkivalo syttyy.
• Virran sammuttaminen: Paina virtapainiketta ja pidä sitä painettuna, kunnes merkkivalo sammuu.

5.2 Automaattinen Voltage Asetus (AVR)

The UPS automatically corrects low and high voltages to safe levels for your connected equipment without switching to battery power. This feature helps to preserve battery life and maximize runtime during actual power outages.

5.3 Akun varmuuskopiointitoiminto

Power ou:n aikanatage, the UPS will automatically switch to battery power, providing temporary power to connected devices. The UPS will emit an audible alarm to indicate it is operating on battery power. The indicator light will also change status to reflect battery operation.

Power ou:n aikanatage, save any open files and shut down your computer properly to prevent data loss. The UPS provides sufficient runtime for this purpose, especially for critical low-power devices like network gateways.

6. Huolto

6.1 Akun hoito

• The UPS contains a sealed, maintenance-free lead-acid battery.
• To ensure optimal battery life, keep the UPS connected to utility power at all times.
• Vältä UPS-laitteen säilyttämistä äärimmäisissä lämpötiloissa.
• The battery is not user-serviceable. If the battery requires replacement, contact APC customer support or a qualified service technician.

6.2 Puhdistus

Periodically clean the exterior of the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are clear of dust and debris.

7. Vianmääritys

This section addresses common issues you might encounter with your APC BV500I-MS Easy UPS.

• UPS ei käynnisty:
  • Ensure the UPS power cord is securely plugged into a live wall outlet.
  • Varmista, että pistorasia toimii, kytkemällä siihen toinen laite.
  • Ensure the power button is pressed and held long enough to activate the unit.
• UPS is beeping continuously or frequently:
  • Tämä yleensä tarkoittaa, että UPS toimii akkuvirralla virrankatkoksen vuoksi.tage tai vaikea voltage-vaihtelu. Tallenna työsi ja sammuta kytketyt laitteet, jos ulostage on pitkittynyt.
  • If utility power is present, check for an overload condition (too many devices connected or devices drawing too much power). Disconnect non-essential equipment.
• Connected equipment loses power during an outage:
  • Ensure equipment is plugged into the battery backup outlets, not just surge-only outlets (if applicable, though this model has universal outlets for battery backup).
  • The UPS might be overloaded. Reduce the number of connected devices.
  • The battery may be depleted or at the end of its service life. Allow the UPS to charge for 8 hours, or consider battery replacement if the issue persists.

For further assistance, refer to the APC support websivustolla tai ota yhteyttä asiakaspalveluun.

8. Tekniset tiedot

9. Takuu ja tuki

For detailed warranty information, please refer to the warranty card included with your product or visit the official APC by Schneider Electric website. For technical support, product registration, or further assistance, please visit the APC support portal or contact their customer service department.

Verkkoresurssit: www.apc.com/support