Anderic RR409UD

Anderic RR409UD Universal TV Remote Control User Manual

Model: RR409UD

1. Tuote ohiview

The Anderic RR409UD is a direct replacement remote control designed for various Magnavox and Sanyo television models, including popular Smart TV variants. This remote is pre-programmed for immediate use with supported Magnavox and Philips models, requiring no additional setup. It provides essential functions such as MENU, INPUT, and standard navigation controls. This remote is specifically for televisions and does not operate other device types.

Edessä view of the Anderic RR409UD remote control, showing all buttons and the Anderic logo.

Kuva 1.1: Edessä view of the Anderic RR409UD remote control, displaying all buttons and the Anderic logo. This image illustrates the layout and design of the remote.

Kulma view of the Anderic RR409UD remote control, highlighting its ergonomic design.

Kuva 1.2: Kulmassa view of the Anderic RR409UD remote control, showcasing its ergonomic shape and button placement from a side perspective.

2. Asennus

2.1 Akun asennus

The Anderic RR409UD remote control requires two AAA batteries for operation. Follow these steps to install them:

  1. Paikanna paristolokero kaukosäätimen takana.
  2. Avaa paristokotelo liu'uttamalla sitä alaspäin tai nuolen osoittamaan suuntaan.
  3. Aseta kaksi AAA-paristoa paikoilleen varmistaen, että positiiviset (+) ja negatiiviset (-) navat ovat oikein lokeron sisällä olevien merkintöjen kanssa.
  4. Sulje paristokotelon kansi liu'uttamalla sitä takaisin paikalleen, kunnes se napsahtaa tukevasti.
Takaisin view of the Anderic RR409UD remote control, showing the battery compartment and compliance information.

Kuva 2.1: Takaosa view of the Anderic RR409UD remote control, illustrating the location of the battery compartment and regulatory markings.

2.2 Ensimmäinen käyttökerta

The Anderic RR409UD remote is pre-programmed for compatible Magnavox and Philips TV models. Once batteries are installed, it is ready for immediate use. No additional programming or code entry is required. Simply point the remote at your television and begin operating it.

3. Käyttöohjeet

This section outlines the primary functions of the buttons on your Anderic RR409UD remote control.

  • Virtanappi (U): Turns the television on or off.
  • Lähde-painike: Cycles through available input sources (e.g., HDMI 1, HDMI 2, AV).
  • Numeronäppäimistö (0-9): Syöttää kanavanumerot suoraan.
  • VOL +/-: Säätää television äänenvoimakkuutta.
  • CH +/-: Changes the television channel up or down.
  • Mykistyspainike (x): Mutes or unmutes the television audio.
  • MENU-painike: Avaa television päävalikon.
  • Navigointipainikkeet (ylös, alas, vasemmalle, oikealle, OK): Käytetään valikoissa navigointiin ja valintojen vahvistamiseen.
  • BACK-painike: Palaa edelliseen valikkoon tai näyttöön.
  • App Buttons (e.g., Netflix, YouTube, Vudu): Provides direct access to specified streaming applications.
  • INFO -painike: Näyttää tietoja nykyisestä ohjelmasta tai syötteestä.
  • SLEEP-painike: Sets a timer for the television to turn off automatically.
  • P.SIZE (Picture Size): Adjusts the aspect ratio or picture size.

For specific functions not listed, refer to your television's original user manual, as button functionality can vary slightly between TV models.

4. Huolto

4.1 Pariston vaihto

Vaihda paristot, kun kaukosäätimen vaste hidastuu tai se lakkaa toimimasta. Vaihda aina molemmat paristot samanaikaisesti uusiin AAA-paristoihin. Älä sekoita vanhoja ja uusia paristoja tai erityyppisiä paristoja.

4.2 Puhdistus

Puhdista kaukosäädin pehmeällä, kuivalla liinalla. Pinttyneeseen likaan pyyhi kevyestiampKostuta liina vedellä tai miedolla, hankaamattomalla puhdistusaineella. Vältä voimakkaiden kemikaalien tai liiallisen kosteuden käyttöä, sillä ne voivat vahingoittaa kaukosäätimen elektroniikkaa.

4.3 Varastointi

Säilytä kaukosäädintä viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista. Jos kaukosäädintä ei käytetä pitkään aikaan, on suositeltavaa poistaa paristot vuotojen estämiseksi.

5. Vianmääritys

  • Kaukosäädin ei vastaa:
    • Varmista, että paristot on asennettu oikein eivätkä ne ole tyhjentyneet. Vaihda tarvittaessa.
    • Tarkista, onko kaukosäätimen ja television infrapunatunnistimen välissä esteitä.
    • Suuntaa kaukosäädin suoraan televisioon.
  • Rajallinen valikoima:
    • Ensure fresh batteries are used.
    • Verify there are no strong light sources (like direct sunlight or bright fluorescent lights) interfering with the infrared signal.
  • Tietyt painikkeet eivät toimi:
    • Puhdista kaukosäädin, erityisesti painikkeiden ympäristö, liasta ja roskista, jotka saattavat aiheuttaa tahmeutta.
    • If only certain buttons are unresponsive, the remote may be damaged. Consider contacting support.
  • Remote does not control other devices:
    • The Anderic RR409UD is designed exclusively for televisions and is not a universal remote for other devices like soundbars, DVD players, or cable boxes.

6. Tekniset tiedot

Tuotteen mitat8.5 x 2 x 1 tuumaa
Tuotteen paino3.2 unssia
Paristot vaaditaan2 AAA-paristoa
Yhteensopivat laitteetTelevision (Magnavox, Sanyo, Philips)
YhteystekniikkaInfrapuna

7. Tuki ja takuu

7.1 Asiakastuki

For further assistance, technical support, or inquiries regarding your Anderic RR409UD remote control, please contact Anderic directly:

7.2 Takuutiedot

Anderic products are manufactured by Dan's Electronics Etc., Inc. For detailed warranty information, please refer to the official Anderic website or contact their customer support. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.

Aiheeseen liittyvät asiakirjat - RR409UD

Preview Anderic RR3720 Projector Universal Remote Control - Setup Guide and Code List
Comprehensive user guide for the Anderic RR3720 universal projector remote control, detailing setup procedures, code input methods, code search functionality, learning capabilities, and a complete list of compatible projector codes.
Preview Anderic RRU401.5 Yleiskaukosäätimen käyttöohje
Kattava opas Anderic RRU401.5 -yleiskaukosäätimen ohjelmointiin ja käyttöön. Opas kattaa asennuksen, ominaisuudet, kuten makrot ja oppimisen, sekä laajat koodiluettelot eri laitteille.
Preview ANDERIC® RRTX001R Kaukosäätimen käyttöohje
ANDERIC® RRTX001R -kaukosäätimen käyttöohje, jossa on yksityiskohtaiset tiedot paristojen asennuksesta, pariliitosohjeista, tuotteen toiminnoista ja seinäkiinnikkeen asennuksesta.
Preview Anderic RRUR01 Yleiskaukosäätimen ohjelmointiohje
Tämä käyttöohje sisältää yksityiskohtaiset ohjeet Anderic RRUR01 -yleiskaukosäätimen ohjelmointiin ja käyttöön. Se kattaa koodin syöttämisen, automaattisen haun, yhden painikkeen hakumenetelmät, laitteen lukituksen, läpimenotoiminnot, oppimistoiminnot, taustavalon säädöt ja sisältää kattavan koodiluettelon eri merkeille ja laitetyypeille.
Preview Anderic FAN53T -kaukosäätimen ohjeet ja koodiasetukset
Kattavat ohjeet Anderic FAN53T -kaukosäätimen käyttöönottoon ja käyttöön, mukaan lukien yksityiskohtaiset vaiheet koodin konfigurointiin ja viitekaavio kaikille 16 koodiyhdistelmälle.
Preview Anderic FAN9T- ja FAN28R/UC7067FCRX-asennusohjeet
Yksityiskohtainen asennusopas Anderic FAN9T- ja FAN28R/UC7067FCRX-kattotuulettimien kaukosäädinjärjestelmille, mukaan lukien vastaanottimen johdotus, kaukosäätimen pariliitos ja paristojen asennus.