LECLSTAR Motion Sensor Closet Light User Manual

1. Johdanto

Thank you for choosing the LECLSTAR Motion Sensor Closet Light. This manual provides essential information for the safe and effective use of your new lighting product. Please read these instructions carefully before installation and operation, and retain them for future reference.

This wireless, battery-operated light features 51 LEDs, motion sensing capabilities, and is designed for various indoor applications such as closets, cabinets, kitchens, and stairs.

2. Turvallisuustiedot

• Älä altista laitetta vedelle tai liialliselle kosteudelle.
• Do not attempt to disassemble, repair, or modify the light. This will void the warranty and may cause damage or injury.
• Käytä lataamiseen vain mukana toimitettua USB-kaapelia.
• Vältä suoraa silmien altistumista LED-valolle, koska se voi olla erittäin kirkas.
• Pidä poissa lasten ulottuvilta.

3. Pakkauksen sisältö

Tarkista paketti varmistaaksesi, että kaikki osat ovat mukana:

• 1 x LECLSTAR Motion Sensor Closet Light
• 1 x Magnetic Plastic Bracket
• 2 x 3M-tarralappua
• 4 x kiinnitysruuvit
• 1 x USB-latauskaapeli
• 1 x Käyttöohje

4. Tuote ohiview

Familiarize yourself with the components of your LECLSTAR Motion Sensor Closet Light.

Kuva 1: Product Components. This diagram illustrates the various parts of the light, including the USB charging port, magnetic strip for mounting, LED light board, durable aluminum alloy casing, ON/OFF switch, infrared motion sensor receiver, and protective ABS cover.

• USB-portti: Sisäisen akun lataamiseen.
• Magneettinauha: Allows for easy attachment to magnetic surfaces or the included bracket.
• LED Light Board: Contains 51 bright LEDs for illumination.
• Alumiiniseosmateriaali: Provides a durable and lightweight housing.
• ON/OFF-painike: Controls the power and operating modes.
• Infrapunavastaanotin: Detects signals from the remote control (if applicable).
• ABS Cover: Protects the LEDs and diffuses light.

5. Asennus ja asennus

The LECLSTAR Motion Sensor Closet Light offers flexible installation options.

5.1 Lataaminen ennen ensimmäistä käyttökertaa

Before installation, fully charge the light. Refer to Section 6 for detailed charging instructions.

5.2 Asennusvaihtoehdot

You can install the light using the magnetic plastic bracket with 3M adhesive or screws.

1. Magneettinen tarttuvuus: Peel off the protective film from the 3M adhesive pads and attach them to the magnetic plastic bracket. Press the bracket firmly onto a clean, dry surface where you wish to install the light. The light can then be magnetically attached to the bracket.
2. Ruuvikiinnitys: Use the provided screws to secure the magnetic plastic bracket to a desired surface. Once the bracket is securely mounted, attach the light magnetically.

Kuva 2: Versatile Installation. This image illustrates the light's adaptability, showing it mounted under a bed, in a kitchen, on a bookshelf, along stairs, inside a wardrobe, and providing illumination for outdoor tasks, highlighting its ease of placement in diverse environments.

5.3 Sijoittelun huomioon ottamista

• For optimal motion detection, position the sensor ball to face the direction of expected movement.
• When using multiple motion sensor lights, avoid placing them too close together in motion-sensing mode, as they may interfere with each other's sensitivity.
• Ensure the installation surface is clean and dry for secure adhesion.

6. Latausohjeet

The LECLSTAR Motion Sensor Closet Light is equipped with a built-in 2400mAh lithium battery.

1. Connect the provided USB charging cable to the light's USB port.
2. Kytke USB-kaapelin toinen pää tavalliseen USB-virtalähteeseen (ei sisälly toimitukseen) tai tietokoneen USB-porttiin.
3. During charging, the indicator light on the device will be sininen.
4. Kun lataus on valmis, merkkivalo syttyy punainen.
5. Täysi lataus kestää yleensä noin 4 tuntia.

Kuva 3: Charging Status. This image demonstrates the charging process, showing the light connected to a power source. The indicator light is red when charging and turns blue when the battery is fully charged, indicating its status clearly.

7. Käyttöohjeet

The light features multiple operating modes and can be controlled via its ON/OFF button or an optional remote control.

7.1 Mode Selection (ON/OFF Button)

Locate the ON/OFF button on the side of the light. Toggle the switch to select the desired mode:

• OFF: Valo on kokonaan pois päältä.
• PÄÄLLÄ: Valo palaa jatkuvasti.
• AUTO (Motion Sensor Mode): The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 30 seconds after no motion is detected.

Kuva 4: Motion Sensor Operation. This image demonstrates how the motion sensor works: the light remains off in bright environments, automatically turns on when movement is detected in the dark within a 3-meter, 120-degree range, and then automatically turns off after 30 seconds of inactivity.

7.2 Motion Sensor Details

• Tunnistuskulma: 120 astetta.
• Havaitseva etäisyys: Jopa 3 metriä (noin 10 jalkaa).
• The sensor is designed to activate only in low-light conditions to conserve battery life.

7.3 Remote Control Functions (Optional)

If your model includes a remote control, you can access additional features:

Kuva 5: Remote Control Functions. This image displays the remote control, highlighting its various buttons: ON/OFF for power, 'S' for sensor mode, '1', '2', '3' for different light modes or brightness levels, '+' and '-' for adjusting brightness, and '15', '30', '60', '120' for setting a timer.

• ON/OFF: Kytkee valon päälle tai pois päältä.
• S (Sensor Mode): Activates the motion sensor mode.
• 1, 2, 3 (Light Modes): Selects different light modes or brightness levels.
• 50%, 100%, +, - (Adjustable Brightness): Säätää valon voimakkuutta.
• 15, 30, 60, 120 (Timer Function): Sets the light to turn off automatically after a specified duration.

8. Huolto

• Puhdistus: Pyyhi valo pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Akun hoito: Akun käyttöiän pidentämiseksi vältä akun usein tapahtuvaa täydellistä purkamista. Lataa valo säännöllisesti, varsinkin jos sitä ei käytetä pitkään aikaan.

9. Vianmääritys

• Valo ei syty:
  • Varmista, että akku on ladattu.
  • Check that the light is switched to the 'ON' or 'AUTO' mode.
• Liiketunnistin ei toimi:
  • Varmista, että valo on 'AUTO'-tilassa.
  • Verify that the ambient light is dark enough for the sensor to activate.
  • Check that the sensor is not obstructed and is facing the area of expected movement.
  • If multiple motion sensor lights are nearby, they might interfere with each other. Try repositioning them.
• Valo välkkyy tai himmenee odottamatta:
  • The battery level may be low. Recharge the light.

10. Tekniset tiedot

11. Takuu ja tuki

LECLSTAR provides a lifetime warranty for this product. If you encounter any issues or have questions regarding your Motion Sensor Closet Light, please contact the LECLSTAR service team for assistance. Our dedicated support team is ready to help you.

For warranty claims or technical support, please refer to the contact information provided on the product packaging or the official LECLSTAR websivusto.