AMP Research PowerStep Instruction Manual

1. Yliview

The AMP Research PowerStep is an automatic, electric-powered running board system designed to provide convenient vehicle access. It extends instantly when the vehicle door is opened and retracts out of sight when the door closes, enhancing ground clearance, aerodynamics, and overall vehicle appearance. The system is constructed with die-cast aluminum alloy components and precision stainless steel pivot pins for stability and durability.

Tärkeimmät ominaisuudet:

• Automaattinen käyttöönotto: Steps automatically extend when doors open and retract when doors close.
• Vankka rakenne: Engineered with 6-inch wide, cab-length step boards capable of supporting a 600 lb. load, featuring heavy-duty stainless steel pivot pins.
• Parannettu turvallisuus: Features a textured, slip-resistant stepping surface for optimal traction in various weather conditions. Includes onboard LED lighting and 'Anti-Pinch' technology to prevent obstruction.
• Kestävät materiaalit: Made in the USA with global materials, utilizing corrosion-resistant aluminum.

Kuva 1: AMP Research PowerStep system components.

2. Parts List (What's in the Box)

Ennen asennuksen aloittamista varmista, että kaikki osat ovat mukana:

• Boards (2)
• Hardware (various bolts, nuts, washers)
• Johtosarja
• Installation Instructions (refer to manufacturer's official guide for detailed steps)

3. Asennus ja asennus

Asennus AMP Research PowerStep is designed to be vehicle-specific and includes all necessary hardware. For detailed, step-by-step instructions, always refer to the official installation guide provided with your product. The general process involves:

1. Valmistelu: Ensure the vehicle is on a level surface and safely supported. Gather all necessary tools.
2. Asennustelineet: Attach the motor and linkage assemblies to the vehicle's frame using the provided hardware.
3. Johdotus: Route the wiring harness from the motors to the vehicle's power source and interior control module. This typically involves connecting to the battery and door trigger wires.
4. Step Board Attachment: Secure the PowerStep boards to the linkage assemblies.
5. Lopulliset säädöt: Test the steps for proper deployment and retraction. Ensure all connections are secure and wiring is neatly routed and protected.

Asennusresurssit:

For visual guidance, the following seller-provided videos demonstrate installation processes for similar running boards on Jeep Wrangler JL models:

4. Käyttöohjeet

The AMP Research PowerStep operates automatically based on your vehicle's door activity:

• Käyttöönotto: When a vehicle door is opened, the PowerStep will automatically extend to a comfortable stepping height.
• Peruutus: After a slight delay once the vehicle doors are closed, the PowerStep will retract and tuck tightly under the cab.
• LED-valaistus: Integrated LED lights illuminate the step and the ground below when the steps are deployed, enhancing visibility in low-light conditions.
• Anti-Pinch Technology: The system is equipped with 'Anti-Pinch' technology, which is designed to stop the step from operating if an obstruction is detected during deployment or retraction, preventing injury or damage.

Figure 2: PowerStep deployed for easy vehicle access.

5. Huolto

Varmistaaksesi pitkäikäisyyden ja optimaalisen suorituskyvyn AMP Research PowerStep, regular maintenance is recommended:

• Puhdistus: Periodically clean the step surfaces and linkage mechanisms to remove dirt, mud, and debris. Use mild soap and water, avoiding harsh chemicals that could damage the finish.
• Voitelu: Inspect the pivot points and moving parts for smooth operation. Lubricate as recommended in the official product manual to prevent stiffness or wear.
• Tarkastus: Regularly check all mounting hardware and electrical connections for tightness and signs of wear or corrosion. Tighten any loose fasteners.

6. Vianmääritys

If you encounter issues with your PowerStep, consider the following common troubleshooting steps:

• Vaiheet, joissa ei ole käyttöönottoa/sisäänvetoa: Check for any obstructions that might be triggering the 'Anti-Pinch' safety feature. Inspect electrical connections for looseness or corrosion. Ensure the vehicle battery has sufficient charge.
• Uneven Operation: Verify that all mounting hardware is securely tightened. Check for any debris or damage to the linkage mechanisms.
• LED-valot eivät toimi: Inspect the wiring to the LED lights for damage or loose connections.

If problems persist, consult the comprehensive troubleshooting section in your official AMP Research PowerStep installation guide or contact customer support.

7. Tekniset tiedot

8. Takuu ja tuki

Takuu:

AMP Research provides a hassle-free, comprehensive 5-year/60,000-mile warranty for the PowerStep. Please refer to the official warranty documentation included with your product for full terms and conditions.

Asiakastuki:

Jos tarvitset lisäapua, teknistä tukea tai takuuvaatimuksia, ota yhteyttä AMP Research customer service directly. Contact information can typically be found in your product packaging or on the official AMP Tutkimus websivusto.