FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb User Manual

1. Johdanto

Thank you for choosing the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulb. Please read these instructions carefully before use and retain them for future reference.

This MR16 LED bulb is designed for various lighting applications, offering energy efficiency and a long lifespan. It features instant full brightness and is suitable for damp sijainnit.

Image: The FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb, showcasing its compact design and GU10 base.

2. Turvallisuustiedot

Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or personal injury.

• VAROITUS: Risk of electric shock. Do not open. Contains no user-serviceable parts.
• Katkaise virta ennen tarkastusta, asennusta tai poistamista.
• Älä käytä paikoissa, joissa se altistuu suoraan vedelle. Sopii käytettäväksiamp sijainnit.
• Tätä laitetta ei ole tarkoitettu käytettäväksi hätäuloskäyntien tai hätävalojen kanssa.
• Do not use with standard dimmers unless specifically stated as dimmable. This bulb is dimmable. Ensure your dimmer is compatible with LED technology.
• Älä asenna lamppua märillä käsillä tai seisoessasi märällä tai damp pinnat.
• Ensure the bulb is securely fastened in the fixture.

3. Asennus ja asennus

This LED bulb is designed for easy installation into compatible GU10 base fixtures.

1. Sammuta virta: Before attempting any installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
2. Poista vanha polttimo: Allow the old bulb to cool completely before carefully removing it from the fixture. For GU10 bulbs, typically push up and twist counter-clockwise to unlock and remove.
3. Asenna uusi lamppu: Align the two pins of the FEIT Electric BPMR16/GU10/930CA LED bulb with the holes in the GU10 socket. Push the bulb firmly into the socket and twist clockwise until it locks into place.
4. Palauta virta: Kun lamppu on asennettu tukevasti, kytke virta takaisin valaisimeen sulakkeen kautta.
5. Testata: Kytke valokatkaisija päälle varmistaaksesi, että lamppu toimii oikein.

If the bulb does not light up, ensure it is properly seated in the socket and that power is restored to the fixture.

4. Käyttöohjeet

The FEIT Electric BPMR16/GU10/930CA LED Bulb operates like a standard light bulb once installed.

• Kytkeminen päälle/pois: Use the existing light switch connected to your fixture to turn the bulb on or off. The bulb will instantly turn on to full brightness.
• himmennys: This bulb is dimmable. If your fixture is connected to a compatible LED dimmer switch, you can adjust the light output. Ensure your dimmer is specifically designed for LED bulbs to avoid flickering or performance issues.
• Käyttöympäristö: This bulb is suitable for both indoor and outdoor use, including damp locations. Avoid direct exposure to water.

5. Huolto

The FEIT Electric BPMR16/GU10/930CA LED Bulb requires minimal maintenance.

• Puhdistus: Before cleaning, ensure the power to the fixture is turned off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• Korvaus: With an average life of 25,000 hours, this LED bulb is designed for long-term use. When replacement is eventually needed, follow the installation steps in Section 3.

6. Vianmääritys

If you encounter issues with your FEIT Electric LED bulb, refer to the following troubleshooting steps:

• Polttimo ei syty:
  • Varmista, että virtakytkin on päällä.
  • Tarkista katkaisija tai sulake.
  • Verify the bulb is securely seated in the GU10 socket. Turn off power, remove, and re-insert the bulb.
  • Testaa lamppua toisessa toimivassa valaisimessa sulkeaksesi pois valaisinongelman.
• Välkkymiseen tai himmenemiseen liittyvät ongelmat:
  • Ensure your dimmer switch is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
  • Tarkista, onko valaisimessa tai kytkimessä löysiä liitoksia.
• Bulb Emits Buzzing Noise:
  • This can sometimes occur with incompatible dimmer switches. Try using the bulb without a dimmer or with a different LED-compatible dimmer.

Jos ongelmat jatkuvat näiden vaiheiden suorittamisen jälkeen, ota yhteyttä asiakastukeen.

7. Tekniset tiedot

Detailed technical specifications for the FEIT Electric BPMR16/GU10/930CA MR16 LED Bulb:

8. Takuu ja tuki

Takuu: The manufacturer states "No warranty." for this product. Please refer to your retailer's return policy for any initial defects.

Asiakastuki: For further assistance or inquiries, please contact Feit Electric customer service through their official websivusto tai jälleenmyyjä, josta tuote ostettiin.