1. Johdanto
The CTEK CT5 Time To Go charger is an intelligent, fully automatic 12-volt battery charger and maintainer designed for various lead-acid batteries. It features a unique countdown timer indicating the remaining charging time and a start indicator for when the battery can safely start a vehicle. This compact and shock-proof unit helps prolong battery life and comes with a 5-year warranty.
Image 1.1: The CTEK CT5 Time to Go charger, displaying its intuitive interface with mode selection and time-to-go indicators.
2. Turvallisuustiedot
Lue kaikki turvallisuusohjeet huolellisesti ennen laturin käyttöä. Näiden ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon tai vakavan vamman.
- Käytä aina silmäsuojaimia ja suojavaatetusta työskennellessäsi akkujen kanssa.
- Ensure adequate ventilation during charging to prevent gas accumulation.
- Do not smoke or allow sparks or flames near the battery or charger.
- Disconnect the AC power cord from the outlet before connecting or disconnecting the charging cables from the battery.
- Älä koskaan lataa jäätynyttä tai vahingoittunutta akkua.
- Pidä laturi poissa vedestä ja kosteudesta.
- Tämä laturi on suunniteltu vain 12 V:n lyijyakuille. Älä käytä sitä muuntyyppisten akkujen lataamiseen.
3. Mitä laatikossa on
The CTEK CT5 Time to Go package includes the following items:
- CTEK CT5 Time to Go Battery Charger and Maintainer
- Alligaattori Clamps (for temporary connection)
- Ring Terminals (Eyelets) (for permanent connection)
Optional Protective Bumper
Optional Cig Plug Connector
Optional Comfort Indicator
Valinnainen jatkokaapeli
Kuva 3.1: Esim.amples of optional accessories compatible with the CT5 Time to Go charger.
4. Tuote ohiview
The CT5 Time to Go charger is designed for ease of use and optimal battery care. Its intuitive display provides real-time feedback on charging status and estimated completion time.
Tärkeimmät ominaisuudet:
- Countdown Timer and Start Indicator: Provides an accurate prediction of remaining charging time and indicates when the battery can safely start a vehicle.
- Built-In Temperature Compensation: Ensures efficient charging in varying temperature conditions.
- Reconditioning Mode: Restores stratified and deeply discharged batteries.
- Dedicated AGM Mode: Optimoitu lataus AGM-akuille.
- Patented Desulphation Function: Recovers and extends the life of sulfated batteries.
- Connect and Forget: Fully automatic operation once a program is selected.
- Turvallinen ja helppokäyttöinen: Splash and dustproof, non-sparking, reverse polarity protected, and short-circuit proof.
- Protects Sensitive Equipment: Designed to not damage vehicle electronics; no need to disconnect the battery.
Tuetut akkutyypit:
The CT5 Time to Go supports all types of 12V lead-acid batteries, including:
- AGM (imukykyinen lasimatto)
- MF (Maintenance Free)
- EFB (parannettu tulva-akku)
- CA/CA (Calcium/Calcium)
- MÄRKÄ (tulvinut)
- GEELI
Image 4.1: The CTEK CT5 Time to Go charger is compatible with a wide range of 12V lead-acid battery technologies.
5. Asennus ja yhteys
Follow these steps to safely connect your CTEK CT5 Time to Go charger to a battery:
- Valmistele akku: Ensure the battery terminals are clean and free from corrosion. If the battery is in a vehicle, ensure the ignition is off and all electrical consumers are switched off.
- Liitä akkuun:
- Kytke punainen (positiivinen, +) napaamp or ring terminal to the battery's positive terminal.
- Kytke musta (negatiivinen, -) napaamp or ring terminal to the battery's negative terminal. If connecting to a vehicle battery, connect the negative clamp to the vehicle chassis away from the battery and fuel line, if recommended by the vehicle manufacturer.
- Liitä pistorasiaan: Plug the charger's AC power cord into a wall socket. The charger will perform a self-test.
- Select Charging Program: Press the 'MODE' button on the charger to select the appropriate charging program for your battery type (e.g., NORMAL, AGM, RECOND).
Image 5.1: Simple three-step process for connecting and initiating charging with the CTEK CT5 Time to Go.
Image 5.2: The CTEK CT5 Time to Go charger connected to a vehicle battery using the provided alligator clamps.
6. Käyttöohjeet
Once connected and the program is selected, the CT5 Time to Go operates automatically through its 8-step charging cycle.
Charging Programs:
- NORMAALI: For most lead-acid batteries (WET, MF, Ca/Ca, EFB, GEL).
- Yhtiökokous: For AGM batteries, which require a slightly higher charging voltage.
- RECOND: For reconditioning deeply discharged and stratified batteries. Use this mode sparingly and only when necessary.
Näytön ymmärtäminen:
- Aika mennä: The LED indicators show the estimated time until the battery is fully charged (e.g., 8, 4, 2, 1 hours).
- Start Indicator: An LED will illuminate when the battery has sufficient charge to start a vehicle, even if not fully charged.
- Hoito: Indicates the charger is in maintenance mode, keeping the battery at optimal charge.
Image 6.1: The CTEK CT5 Time to Go utilizes an 8-step charging cycle to recondition, restore, and maintain battery health.
7. Huolto
Regular maintenance ensures the longevity and optimal performance of your charger and battery.
- Laturin hoito: Pidä laturi puhtaana ja kuivana. Pyyhi pehmeällä, kuivalla liinalla.amp liinalla tarvittaessa. Älä käytä liuottimia tai voimakkaita kemikaaleja.
- Kaapelin tarkastus: Periodically inspect the charging cables and connectors for any signs of damage, wear, or corrosion. Replace if damaged.
- Akun huolto: Ensure battery terminals are clean. For flooded batteries, check electrolyte levels periodically and top up with distilled water if needed (refer to battery manufacturer guidelines).
- Varastointi: Kun laturia ei käytetä, säilytä se viileässä ja kuivassa paikassa.
8. Vianmääritys
If you encounter issues with your CTEK CT5 Time to Go charger, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Laturi ei käynnisty | No AC power; poor connection to battery; battery voltage liian alhainen. | Check AC power outlet; ensure secure connections to battery terminals; if battery voltage is extremely low, it may require professional assessment. |
| Lataus kestää liian kauan | Battery is deeply discharged or damaged; incorrect program selected; extreme temperatures. | Allow more time; ensure correct mode (e.g., RECOND for deeply discharged); charging efficiency can be affected by cold. |
| Error indicator lights up | Väärä napaisuus; oikosulku; sisäinen vika. | Check connections for correct polarity; ensure no short circuits; if problem persists, contact support. |
| Laturi lämpenee | Normaali toiminta latauksen aikana. | Tämä on normaalia. Varmista riittävä ilmanvaihto laturin ympärillä. |
9. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Valmistaja | CTEK |
| Malli | CT5 Time To Go (40-255) |
| Tulo Voltage | 100-240V AC, 50-60Hz (Typical for universal chargers) |
| Lähtö Voltage | 12 V DC |
| Latausvirta | 4.3 Amps |
| Akun kapasiteetti | 1.2-110 Ah (charging), up to 160 Ah (maintenance) |
| Mitat (P x L x K) | 11.02 x 5.9 x 2.33 tuumaa |
| Paino | 1.7 kiloa |
| Suojaus | IP65 (Splash and dustproof), Reverse Polarity, Short-Circuit |
| Käyttölämpötila | -20 °C - +50 °C (-4 °F - +122 °F) |
Image 9.1: The CTEK CT5 Time to Go charger is compatible with various vehicles, including cars, motorcycles, and recreational vehicles.
10. Takuu ja tuki
The CTEK CT5 Time To Go charger comes with a 5 vuoden takuu from the date of purchase, covering defects in material and workmanship.
For technical support, warranty claims, or further information, please contact CTEK customer service or visit the official CTEK websivusto. Säilytä ostokuitti takuun voimassaoloa varten.
CTEK is committed to maximizing battery performance and providing reliable battery management solutions.
Image 10.1: The CTEK brand logo, representing quality in battery management systems.