Johdanto
The SCS Sentinel LightSensor 360 (Model HCN0056) is an outdoor motion detector designed to enhance security and convenience by automatically activating lighting upon detecting human movement. This infrared volumetric detector offers a 360° detection angle and a range of up to 6 meters in open areas. It is built to withstand outdoor conditions with an IP44 rating and operates reliably in temperatures between -20°C and 40°C. This manual provides essential information for the proper installation, operation, and maintenance of your device.
Asennus ja asennus
The LightSensor 360 is designed for easy installation. For optimal performance, it should be mounted at a suitable height to ensure a clear detection sweep. The package includes all necessary mounting hardware and an instruction manual.
Asennuspaikka
- Install the detector in a location that provides an unobstructed view valvottavasta alueesta.
- Mount the device at a height that allows for effective detection, such as on a porch, near an entrance door, on an awning pillar, or in a garden.
- Avoid placing the detector near heat sources, direct sunlight, or objects that might cause false triggers (e.g., moving branches).
Johdotus
The device is powered by an electrical cable. Ensure all wiring is performed by a qualified professional and complies with local electrical codes. Connect the detector to the lighting system it is intended to control.
Tunnistusalue
The detector provides a 360° detection angle with a maximum range of 6 meters. The effective detection area forms a cone shape, as illustrated below.
The product packaging provides an overview of the key features and specifications.
Käyttöohjeet
Once installed and powered, the LightSensor 360 will automatically detect movement and activate the connected lighting. The primary adjustable feature is the timer function.
Ajastimen säätö
The duration for which the light remains on after detection can be adjusted. This temporization mode is configurable between 10 seconds and 10 minutes. Refer to the detailed instructions provided in the included manual for specific steps on how to set this duration according to your preferences.
Havaitsemisherkkyys
The detector is designed to sense human movement. While the range is fixed at 6 meters and the angle at 360°, ensure the detection area is clear of obstructions for consistent performance.
Huolto
The SCS Sentinel LightSensor 360 requires minimal maintenance. Regular cleaning of the sensor lens can help ensure optimal performance.
- Puhdistus: Pyyhi anturin linssi säännöllisesti pehmeällä,amp cloth to remove dust, dirt, or cobwebjotka voivat estää havaitsemisen. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Tarkastus: Occasionally check the mounting and wiring for any signs of wear or damage.
Laitteen sisällä ei ole käyttäjän huollettavissa olevia osia. Älä yritä avata tai korjata laitetta itse.
Vianetsintä
If you experience issues with your LightSensor 360, consider the following common troubleshooting steps:
- Valo ei syty:
- Check the power supply to the detector and the connected light.
- Varmista, että lamppu toimii.
- Verify that the detection area is clear and that movement is occurring within range.
- Adjust the timer setting to ensure it's not set too short.
- Valo palaa jatkuvasti:
- Check for continuous movement within the detection zone.
- Varmista, että anturin linssi on puhdas eikä siinä ole esteitä.
- Verify the timer setting is correctly configured.
- Väärät liipaisimet:
- Review the mounting location for potential sources of false triggers, such as moving branches, reflections, or heat sources.
- Ensure the detector is not exposed to direct sunlight.
Jos ongelmat jatkuvat, ota yhteyttä asiakaspalveluun saadaksesi apua.
Tuotteen tekniset tiedot
| Mallinumero | HCN0056 |
| Merkki | SCS Sentinel |
| Tunnistustyyppi | Infrared Volumetric Motion Detector |
| Havaintokulma | 360° |
| Havaintoalue | Jopa 6 metriä (avomaalla) |
| Virtalähde | Wired Electric (220-240V, up to 2000W) |
| Ingress Protection (IP) -luokitus | IP44 (Resistant to splashes and solid objects >1mm) |
| Käyttölämpötila | -20 °C - 40 °C |
| Ajastimen säätö | 10 sekunnista 10 minuuttiin |
| Väri | Valkoinen |
| Asennustyyppi | Seinäteline |
| Tuotteen mitat (P x L x K) | 10.2 x 5.4 x 10.2 cm |
| Paino | 137 grammaa |
| Mukana olevat komponentit | 1 motion detector, mounting hardware |
Takuutiedot
The SCS Sentinel LightSensor 360 (HCN0056) comes with a 2 vuoden takuu, as indicated on the product packaging. This warranty covers manufacturing defects and ensures the reliability of the product under normal use conditions.
For warranty claims or detailed terms and conditions, please retain your proof of purchase and contact SCS Sentinel customer support.
Asiakastuki
SCS Sentinel is committed to providing quality technical products and support. Our technical assistance team, based in France, is available to help you with product installation and any questions you may have.
For technical assistance, product inquiries, or support, please visit our official websivustolla tai ota yhteyttä suoraan:
- Virallinen Websivusto: scs-laboutique.com
- Yhteystiedot: Katso virallisen yhteystieto-osio website or the documentation included with your product for phone numbers and email addresses.
Our technicians provide informed and personalized advice to ensure your satisfaction.