1. Johdanto
This manual provides essential information for the safe and efficient operation of your APC SMT1500RMI2UC Line-Interactive 1500VA Uninterruptible Power Supply (UPS). The UPS is designed to protect your electronic equipment from power outages, surges, and sags, ensuring continuous power and data integrity. Please read this manual thoroughly before installation and use.
2. Turvallisuustiedot
WARNING: Risk of Electric Shock or Explosion
- This UPS contains internal batteries that may present a shock hazard even when disconnected from the utility power.
- Akkujen huollon tulee suorittaa tai valvoa henkilökunnan, joka tuntee akut ja tarvittavat varotoimenpiteet.
- Älä hävitä paristoja tulessa. Paristot voivat räjähtää.
- Älä avaa tai vahingoita paristoja. Vapautunut elektrolyytti on haitallista iholle ja silmille. Se voi olla myrkyllistä.
- Ensure proper grounding of the UPS and connected equipment.
- Do not operate the UPS in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.
3. Tuote ohiview
3.1 Etupaneeli
Kuva 3.1: Etuosa view of the APC SMT1500RMI2UC UPS, showing the LCD display and control buttons.
The front panel features an intuitive LCD display and control buttons for monitoring UPS status, configuring settings, and performing self-tests. The display provides real-time information on load, battery charge, and operational status.
Figure 3.2: Close-up of the UPS LCD display, indicating 0% load and 100% battery charge.
3.2 Takapaneeli
Kuva 3.3: Takaosa view of the UPS, highlighting the input power connector, six IEC-C13 output outlets, communication ports, and battery connector.
The rear panel includes the main power input, six IEC-C13 output outlets for connecting protected equipment, and various communication ports. An overload protector button is also present for resetting in case of an electrical overload.
Kuva 3.4: Yksityiskohtainen view of the USB, Serial, and Network (SmartConnect) communication ports.
3.3 SmartConnect Feature
The APC SMT1500RMI2UC features SmartConnect, allowing for cloud-based remote monitoring and management of your UPS. This enables you to receive alerts, monitor status, and perform basic management tasks from any web- käytössä oleva laite.
Figure 3.5: The APC SmartConnect dashboard accessible across various devices for remote monitoring.
4. Asennus
4.1 Pakkauksesta purkaminen ja tarkastus
Carefully unpack the UPS and inspect it for any shipping damage. Report any damage to the carrier and your dealer. Retain the packing materials for future use.
4.2 Akun liitäntä
The UPS is shipped with the internal battery disconnected for safety. Before initial use, connect the battery according to the instructions provided in the quick start guide or on the unit itself. This typically involves pulling out the battery tray, rotating the battery, and pushing it back in until it clicks into place.
4.3 Sijoitus ja asennus
The SMT1500RMI2UC is designed for rack-mount installation. Ensure adequate ventilation around the unit. Avoid placing the UPS near heat sources or in areas with excessive dust or moisture.
Figure 4.1: The UPS securely installed within a standard server rack.
4.4 Kytkentälaitteet
- Connect the UPS to a properly grounded utility power outlet using the provided power cord.
- Connect your critical equipment (servers, network devices, etc.) to the IEC-C13 output outlets on the rear of the UPS. Ensure the total load does not exceed the UPS's capacity.
- For remote monitoring, connect an Ethernet cable from your network to the SmartConnect network port on the rear panel.
4.5 Ensimmäinen käynnistys
Press the power button on the front panel to turn on the UPS. The LCD display will illuminate, and the UPS will perform a self-test. Allow the UPS to charge for at least 24 hours before relying on its full battery runtime capacity.
5. Käyttö
5.1 Virran kytkeminen päälle/pois
- Virran kytkeminen: Paina virtapainiketta ja pidä sitä painettuna, kunnes näyttö syttyy.
- Virran sammuttaminen: Paina virtapainiketta ja pidä sitä painettuna, kunnes näyttö sammuu.
5.2 LCD-näyttö ja navigointi
The LCD display provides real-time status information. Use the navigation buttons (up, down, enter, escape) to browse through menus, view detailed information, and adjust settings such as output voltage, alarm thresholds, and self-test schedules.
5.3 Automaattinen Voltage Asetus (AVR)
UPS-laitteessa on automaattinen äänenvoimakkuuden säätötage Regulation (AVR) to correct minor voltage fluctuations without switching to battery power. This extends battery life and ensures a stable power supply to connected equipment.
5.4 Green Mode
The Green Mode feature optimizes UPS efficiency by bypassing the AVR when utility power is stable, reducing energy consumption and heat generation. The UPS automatically switches to AVR or battery mode when power conditions require it.
5.5 SmartConnect Monitoring
Once connected to your network, register your UPS with the APC SmartConnect portal. This allows you to monitor the UPS status, receive email alerts for critical events, and perform remote diagnostics via a secure web käyttöliittymä tai mobiilisovellus.
6. Huolto
6.1 Akun hoito ja vaihto
The internal battery has a typical lifespan of 3-5 years. Regular self-tests help monitor battery health. When the battery needs replacement, the UPS will indicate this on the LCD and via SmartConnect. Replace batteries with APC-approved replacement battery cartridges (RBCs) to ensure optimal performance and safety.
6.2 laiteohjelmistopäivitystä
Periodically check for firmware updates through the SmartConnect portal or APC's website. Firmware updates can provide performance enhancements, bug fixes, and new features. Follow the provided instructions carefully when performing updates.
6.3 Puhdistus
Keep the UPS free from dust and debris. Use a dry cloth to clean the exterior. Do not use liquid cleaners or solvents.
7. Vianmääritys
Jos UPS-laitteessasi on ongelmia, katso seuraavat yleiset ongelmat ja ratkaisut:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| UPS ei käynnisty | Battery not connected; No utility power; Faulty power cord | Ensure battery is connected; Check utility power; Verify power cord connection. |
| UPS beeps frequently | On battery power; Low battery; Overload | Check utility power; Allow battery to charge; Reduce connected load. |
| Ylikuormituksen ilmaisin päällä | Too much equipment connected | Disconnect non-essential equipment; Press the overload protector reset button on the rear panel. |
| Akku kaipaa vaihtoa | Akun käyttöikä on lopussa | Order and install a new APC replacement battery cartridge. |
For more detailed troubleshooting, consult the full product documentation available on the APC website or through the SmartConnect portal.
8. Tekniset tiedot
Key technical specifications for the APC SMT1500RMI2UC UPS:
- Malli: SMT1500RMI2UC
- Kapasiteetti: 1500 VA / 1000 W
- Tulo Voltage: 230 volttia
- Lähtöliitännät: 6 x IEC-C13
- Mitat (K x L x S): 3.39 x 17.01 x 18.78 tuumaa (8.6 x 43.2 x 47.7 cm)
- Tuotteen paino: 57.2 puntaa (26 kiloa)
- Akun tyyppi: 1 x A battery (included)
- Viestintäportit: USB, Serial, Network (SmartConnect)
- Väri: Musta
- Päivämäärä, kun ensimmäinen saatavilla: 3. huhtikuuta 2018
Figure 8.1: Runtime graph illustrating the estimated battery backup time based on connected load for the SMT1500RMI2UC model.
9. Takuu ja tuki
For warranty information and technical support, please refer to the official APC by Schneider Electric website or contact their customer service. Keep your purchase receipt and product serial number handy when contacting support.
You can find additional resources and support through the APC by Schneider Electric Store on Amazon.
