TFA USB-tikku 30.3175 Käyttöohje

Johdanto

This manual provides detailed instructions for the setup, operation, and maintenance of your TFA USB - Stick 30.3175. Please read this manual carefully before using the device to ensure proper functionality and to avoid damage.

Tuote loppuview

The TFA USB - Stick 30.3175 is a USB transceiver designed for use with specific TFA devices, enabling data transmission via radio frequency.

Figure 1: TFA USB Stick 30.3175. This image shows the compact, rectangular USB stick, light gray in color, with a standard USB-A connector at one end.

Figure 2: TFA Brand Logo. The logo features the letters "TFA" in bold blue uppercase, with a yellow curved shape behind the "A" and a registered trademark symbol.

Tärkeimmät ominaisuudet:

• USB Transceiver functionality.
• Radio transmission at 868 MHz.
• Kompakti ja kevyt muotoilu.

Asennus

1. Järjestelmävaatimukset: Ensure your computer meets the necessary operating system requirements for the accompanying software (if applicable).
2. Ohjelmiston asennus: If your TFA device requires specific software for data logging or analysis, install it according to the software's instructions. This USB stick acts as a receiver for data from compatible TFA sensors.
3. Connect the USB Stick: Insert the TFA USB - Stick 30.3175 into an available USB port on your computer.
4. Ohjaimen asennus: Your operating system may automatically install necessary drivers. If not, refer to the software's documentation for manual driver installation.

Toiminnassa

The TFA USB - Stick 30.3175 functions as a receiver for data transmitted by compatible TFA devices. Its operation is primarily managed through the software associated with your TFA measurement device.

Yhteensopivuus:

This USB stick is suitable for use with the following TFA models:

• 35.1099.IT
• THERMOLOGGER.IT
• 35.1112.IT

For detailed instructions on how to receive and log data, please consult the user manual of your specific TFA measurement device (e.g., 35.1099.IT, THERMOLOGGER.IT, 35.1112.IT).

Huolto

The TFA USB - Stick 30.3175 requires minimal maintenance.

• Puhdistus: Use a soft, dry cloth to clean the exterior of the USB stick. Do not use liquid cleaners or solvents.
• Varastointi: Säilytä laitetta viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista, kun sitä ei käytetä.
• Käsittely: Vältä laitteen pudottamista tai sen altistamista voimakkaille iskuille.

Vianetsintä

If you encounter issues with your TFA USB - Stick 30.3175, consider the following:

• Laitetta ei tunnisteta:
  • Kokeile kytkeä USB-tikku tietokoneesi toiseen USB-porttiin.
  • Käynnistä tietokone uudelleen.
  • Ensure all necessary drivers are installed. Check your computer's Device Manager for any unrecognized devices.
• No Data Reception:
  • Verify that the compatible TFA measurement device is powered on and within range of the USB stick.
  • Check the settings in your TFA software to ensure it is configured to receive data from the correct sensor.
  • Ensure there are no significant obstructions (e.g., thick walls, large metal objects) between the sensor and the USB stick that could interfere with the 868 MHz radio signal.

For persistent issues, refer to the support section of the TFA websivustolla tai ota yhteyttä asiakaspalveluun.

Tekniset tiedot

Takuu ja tuki

For warranty information and technical support, please refer to the official TFA websivustolta tai ota yhteyttä paikalliseen jälleenmyyjään. Säilytä ostokuitti ostotodistuksena.

TFA Dostmann GmbH & Co. KG
www.tfa-dostmann.de