HILTI VC 150-6 X Vacuum Cleaner User Manual

1. Turvallisuustiedot

Read all safety warnings and instructions before operating this vacuum cleaner. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Yleinen turvallisuus

• Always disconnect the power plug from the outlet before making any adjustments, changing accessories, or storing the appliance.
• Do not use the vacuum cleaner in wet conditions or to pick up flammable or combustible liquids.
• Pidä hiukset, löysät vaatteet, sormet ja kaikki kehon osat poissa aukoista ja liikkuvista osista.
• Älä poimi mitään palavaa tai savuttavaa, kuten savukkeita, tulitikkuja tai kuumaa tuhkaa.
• Käytä ainoastaan ​​tässä käyttöohjeessa kuvatulla tavalla. Käytä ainoastaan ​​valmistajan suosittelemia lisälaitteita.
• Älä käytä vaurioituneen johdon tai pistokkeen kanssa. Jos laite ei toimi niin kuin sen pitäisi, se on pudonnut, vaurioitunut, jätetty ulos tai pudonnut veteen, palauta se huoltokeskukseen.
• Älä vedä tai kanna johdosta, käytä johtoa kahvana, sulje ovea johdon päälle tai vedä johtoa terävien reunojen tai kulmien ympäri. Älä aja laitetta johdon yli. Pidä johto poissa kuumista pinnoista.

2. Tuote ohiview

The HILTI VC 150-6 X is a robust corded electric vacuum cleaner designed for various cleaning tasks on surfaces such as carpet, hard floor, rugs, and bare floors. It features a 6-gallon capacity and is equipped with a push-button controller and touch control for ease of use.

Image 1: HILTI VC 150-6 X Vacuum Cleaner. This image displays the main vacuum unit, including its wheels, dust container, and the attached hose with a nozzle.

Tärkeimmät ominaisuudet:

• Malli: VC 150-6 X
• Tuotenumero: 2167146
• Kapasiteetti: 6 gallonaa
• Ohjaus: Push Button Controller, Touch Control
• Liikkuvuus: 4 Wheels for easy maneuverability
• Suodatintyypit: Cartridge, Disk, Foam, HEPA Filter (depending on configuration/accessories)

3. Asennus

Follow these steps to prepare your HILTI VC 150-6 X for first use.

Purkaminen

1. Poista kaikki osat varovasti pakkauksesta.
2. Check for any damage during transit. If any damage is found, contact your HILTI service representative.
3. Ensure all listed components are present: main unit, hose, extension wands, floor nozzle, crevice tool, and filters.

Kokoonpano

1. Kiinnitä pyörät: If not pre-assembled, securely attach the four wheels to the base of the vacuum cleaner.
2. Asenna suodatin: Open the vacuum cleaner's lid/housing. Insert the appropriate filter (e.g., HEPA filter, foam filter) into its designated slot. Ensure it is seated correctly to prevent dust leakage.
3. Liitä letku: Securely attach the flexible hose to the suction inlet on the main unit. Ensure a tight connection.
4. Kiinnitä tarvikkeet: Connect the desired extension wands and floor nozzle or other attachments to the end of the hose.

Virtaliitäntä

Connect the power cord to a suitable electrical outlet (120V). Ensure the outlet is properly grounded.

4. Käyttöohjeet

This section details how to operate your HILTI VC 150-6 X Vacuum Cleaner effectively.

Pölynimurin käynnistäminen

1. Ensure the vacuum cleaner is properly assembled and connected to a power source.
2. Press the power button on the control panel. The vacuum cleaner will start.
3. Use the touch control interface to adjust suction power or switch between modes if available.

Imurointivinkkejä

• For optimal cleaning, move the floor nozzle slowly over the surface.
• Use the appropriate attachment for the surface being cleaned (e.g., floor nozzle for large areas, crevice tool for tight spaces).
• Regularly check the dust container and empty it before it becomes full to maintain suction performance.
• Avoid vacuuming large, sharp objects that could damage the hose or internal components.

Stopping the Vacuum Cleaner

Press the power button again to turn off the vacuum cleaner. Disconnect the power cord from the outlet after use.

5. Huolto

Regular maintenance ensures the longevity and optimal performance of your HILTI VC 150-6 X.

Pölysäiliön tyhjennys

1. Varmista, että pölynimuri on sammutettu ja irrotettu pistorasiasta.
2. Release the latches securing the motor head to the dust container.
3. Carefully lift the motor head off.
4. Empty the contents of the dust container into a waste receptacle.
5. Wipe the inside of the container with a damp liinalla tarvittaessa.
6. Reassemble the unit, ensuring the latches are securely fastened.

Suodattimen puhdistus ja vaihto

The VC 150-6 X uses various filter types including Cartridge, Disk, Foam, and HEPA filters. Refer to your specific filter type for cleaning instructions.

• HEPA/Cartridge Filters: Tap gently to dislodge dust. Do not wash unless specified by the manufacturer. Replace every 6-12 months or when suction noticeably decreases.
• Foam Filters: Can often be rinsed with water. Allow to air dry completely before reinstallation.
• Varmista aina, että suodattimet ovat täysin kuivat ennen kuin asetat ne takaisin pölynimuriin.

Yleissiivous

Pyyhi pölynimurin ulkopinta pehmeällä, d:lläamp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.

6. Vianmääritys

This section provides solutions to common issues you might encounter with your HILTI VC 150-6 X.

7. Tekniset tiedot

Detailed technical specifications for the HILTI VC 150-6 X Vacuum Cleaner.

8. Takuu ja tuki

For warranty information, technical support, or service inquiries regarding your HILTI VC 150-6 X Vacuum Cleaner, please contact HILTI customer service directly.

Refer to your purchase documentation or the official HILTI website for specific warranty terms and contact details in your region.

HILTI-virallinen Websivusto: www.hilti.com