TOPGREENER TDOS5-JD Kaksoiskuormitusliiketunnistinkytkimen käyttöohje

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your TOPGREENER TDOS5-JD Dual Load Motion Sensor Switch. This device is designed to automatically control two separate loads, such as lights and a fan, based on occupancy or vacancy detection using Passive Infrared (PIR) technology. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Turvallisuustiedot

• VAROITUS: Tulipalon, sähköiskun tai kuoleman välttämiseksi katkaise virta sulakekeskuksesta tai sulaketaulusta ja testaa, että virta on katkaistu ennen johdotuksen tekemistä.
• Asennuksen saa suorittaa vain pätevä sähköasentaja tai se on tehtävä kaikkien paikallisten ja kansallisten sähkömääräysten mukaisesti.
• This device requires a maadoitusjohto asianmukaista toimintaa varten.
• Tämä laite tekee not require a neutral wire.
• Do not use this device with loads exceeding its specified ratings.
• Vain sisäkäyttöön.

3. Pakkauksen sisältö

• TOPGREENER TDOS5-JD Dual Load Motion Sensor Switch
• Käyttöohje
• Kiinnitysruuvit
• Lankamutterit

4. Tuotteen ominaisuudet

• Kaksoiskuormituksen hallinta: Connect and automate two separate loads (e.g., lights and a fan) from a single unit.
• PIR-liiketunnistin: Detects motion with a 180° field of view, covering up to 40ft in front and 20ft on either side. Advanced PIR technology helps reduce false triggers.
• Walk-Through Feature: Automatically turns off loads after 2.5 minutes if no further motion is detected within 30 seconds of the initial trigger.
• Useita toimintatiloja:
  • Occupancy Sensor Mode (OCCS): Loads turn ON automatically when motion is detected and OFF after a set time delay when the area is vacant.
  • Dual Occupancy Mode (OCCD): Both loads operate in occupancy mode.
  • Vacancy Sensor Mode (VACD): Loads are turned ON manually and turn OFF automatically after a set time delay when the area is vacant.
• Säädettävä aikaviive: Configurable options for 15 seconds (Test mode), 5 minutes, 10 minutes, 20 minutes, and 30 minutes.
• Ei vaadi nollajohtoa: Simplifies installation in older homes or locations without a neutral wire.
• Ground Wire Required: Essential for safe operation.
• Sähköiset arvosanat: 120/277VAC@60Hz; 800W incandescent/halogen, 150W LED/CFL, 1/4HP motor.
• Vaatimustenmukaisuus: Compliant with Title 20 & Title 24.
• Single-Pole Only: Designed for single-pole applications.

5. Asennus

Ennen kuin aloitat: Ensure power is OFF at the circuit breaker. This device is for single-pole installations only and requires a ground wire.

1. Sammuta virta: Paikanna vaihdettavan kytkimen suojakatkaisija ja kytke se OFF-asentoon. Varmista, että virta on katkaistu jännitemittarilla.tage testaaja.
2. Poista olemassa oleva kytkin: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires.
3. Tunnista johdot: You should have a Line (hot) wire, two Load wires (one for each load, e.g., light and fan), and a Ground wire. This switch does not require a neutral wire.
4. Wire the Sensor Switch: Connect the wires from the wall box to the corresponding wires on the TDOS5-JD switch using wire nuts.
   • Yhdistä Line (hot) wire from the wall box to the switch's Line wire.
   • Yhdistä Load 1 wire (e.g., for lights) from the wall box to the switch's Load 1 wire.
   • Yhdistä Load 2 wire (e.g., for fan) from the wall box to the switch's Load 2 wire.
   • Yhdistä Maadoitusjohto from the wall box to the switch's Ground wire.
5. Kiinnitä kytkin: Carefully fold the wires into the wall box and secure the switch with the provided screws. Attach the wall plate.
6. Palauta virta: Kytke virta takaisin päälle sulakkeesta.
7. Warm-Up Period: After installation, allow 1-2 minutes for the device to warm up and calibrate before it functions correctly.

Kuva 1: Components of the TDOS5-JD sensor switch, indicating the PIR sensor, Load 1/2 ON/OFF buttons, LED indicator, and a note about the warm-up period after installation. It also highlights that a ground wire is required and no neutral wire is needed.

Kuva 2: An image showing the TOPGREENER TDOS5-JD motion sensor switch being carefully inserted into a standard electrical wall box during the installation process.

6. Käyttö

Once installed and powered, the TDOS5-JD switch will operate according to the selected mode (Occupancy or Vacancy) and configured settings.

• Automaattinen ohjaus: In Occupancy modes, the sensor detects motion and automatically turns on the connected loads. After the area becomes vacant for the set time delay, the loads will turn off. In Vacancy mode, loads are turned on manually and turn off automatically.
• Manuaalinen ON/OFF: The switch features two ON/OFF buttons, one for each load, allowing for manual control. Pressing an ON/OFF button will toggle the respective load.
• LED-ilmaisin: A small LED indicator provides visual feedback on the switch's status.

Kuva 3: A person carrying a laundry basket walks into a room, and the lights automatically turn on, illustrating the hands-free lighting capability of the motion sensor switch.

Kuva 4: A modern bathroom setting where the TOPGREENER dual load sensor switch controls both the overhead lights and the exhaust fan automatically, demonstrating its energy-saving potential.

7. Customization and Settings

The TDOS5-JD switch offers adjustable settings for time delay, sensitivity (range), and operating mode. These settings are located behind the faceplate.

1. Käyttöasetukset: Gently pry open the outer cover of the switch to reveal the adjustment dials and mode switch.
2. Säädä aikaviivettä: Use a small screwdriver to turn the 'TIME' dial to select the desired delay: Test (15 seconds), 5 minutes, 10 minutes, 20 minutes, or 30 minutes.
3. Adjust Sensor Range: Use a small screwdriver to turn the 'RANGE' dial to adjust the motion detection sensitivity from 1 (lowest) to 4 (highest).
4. Valitse toimintatila: Use the small switch labeled 'OCCD OCCS VACD' to choose your desired mode:
   • OCCD: Dual Occupancy Mode
   • OCCS: Single Occupancy Mode
   • VACD: Vacancy-tila

Kuva 5: A detailed diagram illustrating the steps to customize the sensor switch settings. It shows how to open the cover, and then adjust the 'Time' dial (Test, 5, 10, 20, 30 Min), 'Range' dial (1-4), and the 'Mode Select' switch (OCCD, OCCS, VACD).

Kuva 6: An image depicting a modern bathroom with the sensor switch installed on the wall. A magnified inset shows the adjustable time delay and range dials, emphasizing the customization options for automatic light control.

8. Vianmääritys

9. Tekniset tiedot

• Mallinumero: TDOS5-JD
• Mitat: 2.5 x 2.5 x 4.5 tuumaa
• Paino: 6 unssia
• Virtalähde: Johdollinen sähkö
• Voitage: 120/277VAC, 60Hz
• Incandescent/Halogen Load: 800W max
• LED/CFL Load: 150W max
• Moottorin luokitus: 1/4HP max
• Peittoalue: Jopa 1200 neliöjalkaa
• Kenttä View: 180 astetta
• Suurin kantama: 40 feet (in front), 20 feet (sides)
• Käyttölämpötila: 32-131°F (0-55°C)
• Johdotus: Ground wire required, no neutral wire required
• Sertifikaatit: UL Listed, Compliant with Title 20 & Title 24

10. Huolto

The TOPGREENER TDOS5-JD motion sensor switch requires minimal maintenance.

• Puhdistus: Periodically wipe the sensor lens and faceplate with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or sensor.
• Tarkastus: Occasionally check the switch for any visible damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them or consult a qualified electrician.

11. Takuu ja tuki

TOPGREENER products are designed for reliability and performance. For specific warranty information, including terms and conditions, please refer to the warranty documentation provided with your purchase or visit the official TOPGREENER website. For technical support or assistance with troubleshooting, please contact TOPGREENER customer service.

Valmistaja: TOPGREENER

Yhteystiedot: Please visit the TOPGREENER official websivustolta löydät ajankohtaisimmat yhteystiedot ja tukiresurssit.