Tekonsha 118756

Tekonsha T-One® T-Connector Harness (Model 118756) Instruction Manual

For Select Toyota C-HR Vehicles

1. Johdanto

This manual provides detailed instructions for the proper installation, operation, and maintenance of the Tekonsha T-One® T-Connector Harness, Model 118756. This product is designed to provide a 4-way flat trailer wiring connection for select Toyota C-HR vehicles, enabling trailer lighting functions without cutting or splicing vehicle wires.

2. Turvallisuustiedot

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

Tekonsha T-One T-Connector Harness components laid out
Figure 1: All components included in the Tekonsha T-One T-Connector Harness kit. This image displays the main harness with its control module, various vehicle-specific connectors, a 4-way flat trailer connector, power wire with fuse, ground wire, and an assortment of zip ties and electrical connectors.
Tekonsha T-One T-Connector Harness product packaging
Figure 2: The retail packaging for the Tekonsha T-One T-Connector Harness, Model 118756. The box highlights key features such as "Easy to Install" and "No cutting, splicing or taping of vehicle wires."

4. Asennus ja asennus

The Tekonsha T-One® T-Connector Harness is designed for a "Plug & Play" installation, requiring no cutting, splicing, or taping of your vehicle's wires. The installation process typically involves accessing the vehicle's taillight wiring harness.

  1. Valmistele ajoneuvo: Varmista, että ajoneuvo on sammutettu ja seisontajarru on kytketty. Irrota ajoneuvon akun negatiivinen napa.
  2. Access Taillight Wiring: Depending on your Toyota C-HR model, you may need to remove interior trim panels or access panels in the trunk or cargo area to reach the taillight wiring harness connectors. Refer to your vehicle's owner's manual for specific panel removal instructions.
  3. Locate Vehicle Harness: Identify the vehicle's taillight wiring harness connectors. These are typically located behind the taillight assemblies.
  4. T-liittimien kytkentä: Unplug the vehicle's existing taillight harness connector. Insert the corresponding Tekonsha T-Connector into the vehicle's harness, ensuring a secure connection. Then, plug the vehicle's original harness into the other end of the Tekonsha T-Connector. Repeat this process for both sides of the vehicle if applicable.
  5. Asenna ohjausmoduuli: Find a secure, dry location within the vehicle's cargo area or behind the trim panels to mount the control module. Use the provided zip ties or double-sided tape (not included) to secure it, ensuring it is away from moving parts or areas prone to moisture.
  6. Connect Power Wire: Route the power wire from the control module to the vehicle's battery. This may involve routing it through the vehicle's interior and firewall. Connect the fuse holder in-line near the battery, but do not insert the fuse until all connections are complete. Connect the power wire to the positive terminal of the battery.
  7. Yhdistä maadoitusjohto: Connect the white ground wire from the control module to a clean, unpainted metal surface on the vehicle's chassis using the provided ring terminal and a self-tapping screw. Ensure a good electrical ground.
  8. Route 4-Way Flat Connector: Route the 4-way flat connector to the exterior of the vehicle, typically near the trailer hitch. Secure it using zip ties, ensuring it is protected from road debris and heat.
  9. Lopputarkastukset: Reconnect the vehicle's battery. Insert the fuse into the fuse holder. Test all trailer light functions (turn signals, brake lights, running lights) with a trailer or a trailer light tester before reassembling any removed trim panels.

5. Käyttöohjeet

Once installed, the Tekonsha T-One® T-Connector Harness provides a standard 4-way flat connector for your trailer. To operate:

6. Huolto

Minimal maintenance is required for the T-One® T-Connector Harness:

7. Vianmääritys

If you experience issues with your trailer lights, consider the following troubleshooting steps:

If troubleshooting steps do not resolve the issue, contact Tekonsha customer support or a qualified automotive electrician.

8. Tekniset tiedot

OminaisuusYksityiskohta
MerkkiTekonsha
Mallinumero118756
Liittimen tyyppi4-way Flat
Wire Gauge16 Gauge Bonded Wire
Stop/Turn Circuit Capacity5 Amps
Taillight Circuit Capacity7.5 Amps
MateriaaliPolyvinyylikloridi (PVC)
Tuotteen mitat (P x L x K)7 x 5 x 3.72 tuumaa
Tuotteen painoNoin 1.96 kiloa
UPC016118106886

9. Takuu ja tuki

Tekonsha products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Tekonsha website. For technical assistance or support, please contact Tekonsha customer service.

Tekonsha Websivusto: www.tekonsha.com

Aiheeseen liittyvät asiakirjat - 118756

Preview Tekonsha T-One® Connector Installation Guide for Honda HR-V
Step-by-step installation instructions for the Tekonsha T-One® Connector (118877-037) on a Honda HR-V. Includes tools, safety warnings, and wiring details for a 4-way flat trailer connection.
Preview Tekonsha T-One -perävaunun vetokoukun johtosarjan asennus Mercedes Sprinterille ja Freightliner Sprinterille
Vaiheittainen asennusopas Tekonsha T-One T-liitinjohtosarjalle (118876-037) Mercedes Sprinter- ja Freightliner Sprinter -ajoneuvoihin. Sisältää tarvittavat työkalut, turvallisuusvaroitukset ja yksityiskohtaiset ohjeet johtosarjan kytkemiseksi ajoneuvon takavalojärjestelmään ja akkuun.
Preview Tekonsha T-One® T-Connector Harness Installation Guide for Hyundai Ioniq 5
Step-by-step installation guide for the Tekonsha T-One® T-Connector Harness (Model 118870) for Hyundai Ioniq 5. Includes safety warnings, tools, and procedures for trailer wiring.
Preview Toyota Corolla Cross T-One® -liittimen asennusopas
Yksityiskohtaiset asennusohjeet Tekonsha T-One® -liitinjohtosarjan (osanumero 118864-037) asennusta varten Toyota Corolla Crossiin. Ohjeet kattavat työkalut, turvallisuuden sekä vaiheittaiset johdotus- ja asennusohjeet.
Preview Tekonsha T-One® Connector Installation Guide for Lexus NX (Model 118868)
Detailed step-by-step installation instructions for the Tekonsha T-One® T-Connector Harness (Model 118868) for Lexus NX vehicles. Includes required tools, safety warnings, and wiring procedures.
Preview Tekonshan 7-suuntaisen ajoneuvon täydellisen asennussarjan opas Ford Broncolle
Tämä opas sisältää yksityiskohtaiset asennusohjeet Tekonsha 7-suuntaiselle ajoneuvon täydelliselle asennussarjalle, joka on suunniteltu Ford Bronco -malleille, joissa on LED-takavalot. Se kattaa laitteiston yliview, tarvittavat työkalut, vaiheittaiset asennusohjeet ajoneuvon valmisteluun, moduulien kytkentään, johtosarjan reititykseen ja viimeistelyyn sekä vianetsintäopas.