VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount

1. Johdanto

This manual provides detailed instructions for the assembly, operation, and maintenance of your VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount. This mount is designed to hold two flat or curved display screens ranging from 13 to 30 inches, with a maximum weight capacity of 17.6 lbs per screen. It supports VESA mounting patterns of 75x75mm or 100x100mm.

Turvallisuusvaroitus:

• Varmista ennen käyttöä, että kaikki osat on kiinnitetty kunnolla.
• Älä ylitä 17.6 paunan enimmäispainokapasiteettia näyttöä kohden.
• Avoid pulling monitors too far forward or backward unless the stand is bolted down, as this may compromise stability.
• Always check that the base size fits your available desk space to prevent tipping.

2. Pakkauksen sisältö

Please verify that all components listed below are present in your package. If any parts are missing or damaged, contact VIVO customer support.

• Heavy-Duty Base (11" x 15.4")
• Center Pole (16.4" height)
• Dual Monitor Arms with VESA Plates
• Kaapelinhallintapidikkeet
• All necessary hardware (screws, washers, Allen keys)

3. Kokoamisohjeet

Follow these steps to assemble your VIVO Dual Monitor Free-Standing Desk Mount.

1. Attach the Center Pole to the Base: Securely fasten the center pole to the heavy-duty base using the provided screws and Allen key. Ensure it is stable.
2. Install Monitor Arms: Slide the dual monitor arms onto the center pole. Adjust their height to your preference and tighten the locking mechanism.
3. Kiinnitä VESA-levyt näyttöihin: Remove the VESA plates from the monitor arms. Attach these plates to the back of your monitors using the appropriate screws for your monitor's VESA pattern (75x75mm or 100x100mm).
4. Kiinnitä näytöt: Carefully slide the monitors (with attached VESA plates) onto the monitor arms. Ensure they click securely into place.
5. Kaapelin hallinta: Utilize the included cable management clips to route and organize your monitor cables along the arms and down the center pole for a tidy setup.

Figure 1: Assembled VIVO Dual Monitor Free-Standing Desk Mount with monitors.

Figure 2: Detail of VESA plate for monitor attachment.

4. Käyttöohjeet

The VIVO STAND-V102F offers full articulation for optimal viewkulmat.

• Korkeuden säätö: Löysää clamp on the center pole to slide the monitor arms up or down. Re-tighten the clamp firmly once the desired height is achieved.
• Kallistuksen säätö: Monitors can be tilted +45° to -45°. Adjust the tilt knob on the VESA plate to achieve your preferred vertical viewkulma.
• Kääntymisen säätö: The monitor arms allow for 180° swivel, enabling you to adjust the horizontal angle of each monitor independently.
• Kierto: Monitors can be rotated 360° for portrait or landscape orientation. Simply turn the monitor to the desired orientation.
• Arm Articulation: The double center arm joints provide additional articulation, allowing for flexible monitor placement and positioning.

Figure 3: Full articulation features including tilt, swivel, and rotation.

Kuva 4: Esimample of monitors in both portrait and landscape orientations.

5. Ominaisuudet

• Yleinen yhteensopivuus: Fits two screens from 13" to 30" and up to 17.6 lbs each. Supports VESA 75x75mm or 100x100mm mounting patterns.
• Täysi artikulaatio: Offers +45° to -45° tilt, 180° swivel, and 360° rotation for flexible viewing.
• Korkeuden säätö: Monitors can be adjusted along the 16.4" center pole.
• Heavy-Duty Base: A solid steel 11" x 15.4" base ensures stability for your monitor setup.
• Integroitu kaapelinhallinta: Clips are included to keep cables organized and out of sight.

Figure 5: Key dimensions and compatibility information.

Figure 6: The heavy-duty base providing stability.

Kuva 7: Integroitu kaapelinhallintajärjestelmä.

6. Tekniset tiedot

7. Huolto

Varmistaaksesi VIVO-näyttötelineesi pitkän käyttöiän ja optimaalisen suorituskyvyn, noudata näitä huolto-ohjeita:

• Säännöllinen puhdistus: Pyyhi teline pehmeällä,amp liinalla pölyn ja roskien poistamiseksi. Vältä hankaavia puhdistusaineita tai liuottimia.
• Tarkista kiinnikkeet: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Voitelu: If any joints become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

8. Vianmääritys

If you encounter any issues with your monitor mount, refer to the following common problems and solutions:

• Mount is Unstable/Tipping:
  • Ensure the heavy-duty base is fully on a flat, stable surface.
  • Verify that the combined weight of your monitors does not exceed the maximum capacity.
  • Avoid extending monitors too far forward or backward from the center pole without securing the base to the desk (if applicable).
• Monitors Sagging/Not Holding Position:
  • Tighten the tilt adjustment knob on the VESA plate.
  • Ensure all arm joints are securely tightened with the provided Allen key.
• Kallistuksen säädön vaikeus:
  • Some tilt bolts may require a specific Allen key or tool for proper tightening/loosening. Refer to the assembly diagram for exact locations.
  • Ensure the monitor is not exceeding the weight limit, which can make adjustments difficult.

9. Viralliset tuotevideot

10. Takuu ja tuki

VIVO products are backed by a manufacturer's warranty. For specific warranty details, product registration, or technical support, please visit the official VIVO websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Säilytä ostokuitti takuuvaatimuksia varten.

VIVO is a US-based company committed to providing quality ergonomic solutions. Their sales and technical support teams are available to assist with any product-related inquiries.

Figure 8: VIVO's commitment to customer support.