Philips Lighting 5058131PN

Philips myLiving PONGEE LED-kohdevalaisin (malli 5058131PN) Käyttöopas

1. Johdanto

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Turvallisuustiedot

Noudata aina seuraavia turvaohjeita loukkaantumisten tai vaurioiden välttämiseksi:

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

Huomautus: A GU10 LED bulb is ei sisälly ja se on ostettava erikseen.

Packaging box for Philips myLiving PONGEE LED Spot Light

Kuva 2: Tuotepakkaus

4. Asennus ja asennus

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

  1. Valmistele asennusalue: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
  2. Katkaise virta: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
  3. Asenna pohja: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
  4. Valaisimen johto: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
  5. Asenna lamppu: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
  6. Attach the Fixture Body: Secure the main body of the spot light to the mounted base.
  7. Palauta virta: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Käyttöohjeet

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

6. Huolto

7. Vianmääritys

OngelmaMahdollinen syyRatkaisu
Valo ei syty.
  • Ei virtalähdettä.
  • Lamppu on viallinen tai se ei ole asennettu oikein.
  • Löysä johtoliitäntä.
  • Tarkista katkaisija tai sulake.
  • Ensure the wall switch is ON.
  • Replace the bulb with a new GU10 LED bulb.
  • Consult a qualified electrician to check wiring connections.
Valo välkkyy.
  • Löysä polttimon liitos.
  • Yhteensopimaton himmennin (jos sovellettavissa).
  • Viallinen polttimo.
  • Ensure the bulb is securely twisted into the socket.
  • If using a dimmer, ensure it is compatible with LED bulbs.
  • Vaihda polttimo.

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting websivusto. Voit myös ottaa yhteyttä jälleenmyyjään saadaksesi apua.

Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.