1. Johdanto
Thank you for choosing the BYTECH Suction Car Table Mount. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device mount. Please read this manual thoroughly before use to ensure optimal performance and safety.
2. Tuote ohiview
The BYTECH Suction Car Table Mount is designed to securely hold smartphones and tablets in various environments, including vehicles and on flat surfaces. It features a strong suction cup for stable attachment and an adjustable holder for universal compatibility.

Kuva 1: Bytech Suction Car Table Mount. This image displays the Bytech Suction Car Table Mount. It features a large suction cup base, an adjustable arm, and a universal holder designed to securely grip a tablet or smartphone. The device shown in the holder is a tablet displaying a blue digital interface.
3. Asennusohjeet
- Valitse pinta: Select a clean, flat, and smooth surface for mounting. Ensure the surface is free from dust, grease, or moisture for optimal suction.
- Puhdista pinta: Wipe the chosen surface with a clean cloth to remove any debris.
- Kiinnitä imukuppi: Press the suction cup firmly against the clean surface. While maintaining pressure, push down the lever or twist the locking mechanism (if present) on the suction cup base to create a vacuum seal.
- Säädä käsivartta: Loosen the adjustment knobs on the mount's arm to position the device holder at your desired angle and orientation. Tighten the knobs securely once the position is set.
- Aseta laitteesi: Expand the adjustable clamps of the device holder and carefully place your smartphone or tablet into the holder. Ensure the device is securely gripped by the clamps.
4. Käyttöohjeet
- Laitteen yhteensopivuus: The mount is designed for universal compatibility with most smartphones and tablets. Ensure your device fits within the adjustable clamps.
- Kulman säätö: The mount features an adjustable arm and ball joint for flexible viewing angles. Loosen the respective knobs, adjust the angle, and then tighten to secure.
- Kierto: The device holder can typically rotate 360 degrees. Adjust to portrait or landscape mode as needed.
- Turvallinen sijoitus: Always ensure your device is firmly seated in the holder before driving or leaving it unattended.
5. Huolto
- Puhdistus: Käytä pehmeää, damp cloth to clean the mount. Avoid abrasive cleaners or solvents that may damage the material.
- Imukupin hoito: Jos imukuppi menettää otteensa, pese se lämpimällä saippuavedellä, huuhtele huolellisesti ja anna sen kuivua. Tämä voi palauttaa sen tarttuvuusominaisuudet.
- Varastointi: Kun telinettä ei käytetä pitkään aikaan, irrota se ja säilytä sitä viileässä, kuivassa paikassa, poissa suorasta auringonvalosta.
6. Vianmääritys
- Kiinnitys ei tartu kiinni:
- Varmista, että kiinnityspinta on puhdas, kuiva ja sileä.
- Press the suction cup firmly and engage the locking mechanism completely.
- Clean the suction cup as described in the Maintenance section.
- Laite ei sovi kunnolla:
- Verify that your device's dimensions are within the adjustable range of the holder.
- Varmista, että clamps are fully extended and then tightened around the device.
- Mount is Loose/Wobbly:
- Check all adjustment knobs and ensure they are tightened securely.
- Re-attach the suction cup if it appears to have lost its seal.
7. Tekniset tiedot
| Mallinumero | BYMOTB101BK |
| Tuotteen mitat | 1 x 1 x 1 tuumaa |
| Tuotteen paino | 7.5 unssia |
| Merkki | Bytech |
| Yhteensopivat laitteet | Älypuhelimet, tabletit |
| Asennustyyppi | Ajoneuvon kiinnitys |
| Erikoisominaisuus | Säädettävä |
8. Takuu ja tuki
For warranty information or technical support, please refer to the product packaging or contact Bytech customer service directly. Contact details can typically be found on the manufacturer's official websivusto tai mukana toimitetut asiakirjat.





