Johdanto
Thank you for choosing the Summer Waves 12' Ft. Quick Set Inflatable Above Ground Pool with Filter Pump. This manual provides essential information for the safe and efficient setup, operation, maintenance, and troubleshooting of your new pool. Please read this manual thoroughly before installation and retain it for future reference.
Turvallisuustiedot
Always prioritize safety when using any pool. Failure to follow these instructions can result in serious injury or death. This pool is intended for outdoor use only. Adult supervision is required at all times when children are in or near the pool. Do not dive or jump into the pool. Ensure the pool is set up on a level surface to prevent collapse.
- Älä koskaan jätä lapsia ilman valvontaa altaaseen tai sen lähelle.
- Pidä kaikki sähköjohdot ja -laitteet poissa allasalueelta.
- Do not allow rough play or diving.
- Regularly check the pool for damage or leaks.
- Maintain proper water chemistry to ensure a safe swimming environment.
- Ensure all users are aware of emergency procedures.
Pakkauksen sisältö
Varmista, että kaikki osat ovat mukana ennen kokoamisen aloittamista:
- 12' Ft. Quick Set Inflatable Pool Liner
- Suodatinpumppujärjestelmä
- Suodatinpatruuna
- Letkut ja Clamps suodatinpumpun liitännälle
- Käyttöohje (tämä asiakirja)
If any parts are missing or damaged, do not proceed with assembly. Contact Summer Waves customer support for assistance.
Asennus
Altaasesi vakauden ja pitkäikäisyyden kannalta ratkaisevan tärkeää on asianmukainen pohjan valmistelu ja kokoaminen.
1. Paikan valinta ja valmistelu
Choose a firm, level surface free of sharp objects, debris, or excessive slopes. A slight incline can cause the pool to bulge or collapse. Clear the area of grass, roots, and rocks. Consider placing a ground cloth or tarp (not included) under the pool for added protection.
2. Uima-altaan suojamuovin avaaminen
Carefully unfold the pool liner in the chosen area. Ensure the drain plug is facing the desired drainage location. Smooth out any wrinkles on the bottom of the pool as much as possible before filling.

Image: The Summer Waves 12-foot Quick Set Inflatable Pool, shown filled with water and the filter pump connected, ready for use.
3. Ylärenkaan täyttö
Locate the air valve on the top inflatable ring. Use an air pump (not included) to inflate the ring until it is firm to the touch but not over-inflated. Do not use an air compressor designed for high-pressure items like tires, as this can damage the ring.

Kuva: Lähikuva view of the blue inflatable top ring of the Summer Waves pool, showing its smooth texture.
4. Suodatinpumpun kytkeminen
Attach the filter pump hoses to the inlet and outlet fittings on the pool liner. Secure them with the provided clamps. Ensure all connections are tight to prevent leaks. Place the filter pump on a stable, level surface at least 10 feet away from the pool, following local electrical codes.

Kuva: Yksityiskohtainen view of the white filter pump unit connected to the blue pool liner via two corrugated hoses and white fittings.
5. Altaan täyttö
Begin filling the pool with water. As the water level rises, the inflatable top ring will float, and the pool walls will rise. Continuously smooth out any wrinkles on the bottom of the pool from the center outwards. Stop filling when the water reaches the fill line indicated on the pool liner, typically just below the inflatable ring.

Image: The Summer Waves 12-foot Quick Set Inflatable Pool in a green backyard setting, with several adults and children enjoying the water, demonstrating its capacity and family use.
Suodatinpumpun käyttö
The included filter pump helps keep your pool water clean. Ensure the pump is connected to a grounded electrical outlet. Do not operate the pump when the pool is in use. Refer to the separate filter pump manual for detailed operating instructions specific to your pump model.
- Käyttöönotto: After filling the pool, prime the pump by opening the air release valve on top of the filter housing until water flows out. Close the valve and plug in the pump.
- Päivittäinen toiminta: Run the filter pump for at least 4-6 hours daily to ensure proper water circulation and filtration.
- Suodatinpatruuna: The filter cartridge should be rinsed with a garden hose every few days and replaced every 2-4 weeks, depending on usage and water quality.
Huolto
Regular maintenance is essential for clean water and extending the life of your pool.
Vesikemia
Testaa uima-allasvesi säännöllisesti (päivittäin tai joka toinen päivä) uima-allastestipakkauksella. Pidä yllä seuraavia tasoja:
- pH: 7.4 - 7.6
- Vapaa kloori: 1 - 3 ppm (parts per million)
- Alkalisuus: 80–120 ppm
Adjust chemicals as needed. Always add chemicals to water, never water to chemicals, and follow manufacturer's instructions for all pool chemicals.
Altaan puhdistaminen
- Kuoriminen: Käytä päivittäin pintakeräintä lehtien, hyönteisten ja muiden roskien poistamiseen veden pinnalta.
- Imurointi: Imuroi altaan pohja säännöllisesti poistaaksesi siihen kertyneen lian ja roskat.
- Seinien puhdistus: Brush the pool walls regularly to prevent algae buildup.
Filter Pump Care
Turn off and unplug the pump before performing any maintenance. Regularly inspect hoses and connections for leaks or damage. Clean the filter cartridge as described in the "Operating the Filter Pump" section.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Pool losing air from top ring | Small puncture or loose valve cap. | Locate the leak using soapy water. Patch with repair kit (not included) or tighten valve cap. |
| Vesi ei kirkasta | Insufficient filtration, dirty filter, improper chemical balance, or algae. | Run pump longer, clean/replace filter, test and adjust water chemistry, shock treat for algae. |
| Pumppu ei käy | No power, clogged impeller, or motor issue. | Check power connection/breaker. Unplug and inspect impeller for debris. Contact support if motor issue. |
| Water leaking from pump connections | Löysä clamps or damaged O-rings. | Kiristä clamps. Inspect and replace O-rings if damaged. |
For issues not listed here, please contact Summer Waves customer support.
Varastointi
At the end of the swimming season or when not in use for an extended period, properly store your pool to prevent damage.
- Drain all water from the pool using the drain plug.
- Clean and dry the pool liner thoroughly to prevent mold and mildew.
- Deflate the top ring and disassemble the filter pump.
- Clean and dry all pump components and hoses.
- Store the pool and pump in a cool, dry place, protected from direct sunlight and extreme temperatures.
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Merkki | Kesän aallot |
| Malli | 12' Ft. Quick Set Inflatable Above Ground Pool with Filter Pump |
| Tuotteen mitat | 144 cm P x 144 cm L x 30 cm K |
| Muoto | Pyöristää |
| Materiaali | Polyvinyylikloridi (PVC) |
| Tuotteen paino | 12.74 kiloa (28 puntaa) |
| Mukana olevat komponentit | Suodatinpumppu |
| UPC | 845662000216 |
| ASIN | B06Y3ZMFBT |
Takuu ja tuki
For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Summer Waves website. For technical support, replacement parts, or any other inquiries, please contact Summer Waves customer service.
Huomautus: Tarkat takuuehdot ja yhteystiedot voivat vaihdella alueen ja ostopäivämäärän mukaan.