Planet IGS-5225-4T2S Industrial L2+ -hallittavan kytkimen käyttöohje

1. Tuote ohiview

The PLANET IGS-5225-4T2S is a robust Modbus TCP fully-managed Gigabit fiber switch designed for industrial networking environments. It features 4 10/100/1000Mbps copper ports and 2 100/1000X SFP ports, along with a redundant power system for enhanced reliability. Its IP30 rugged, compact-sized case allows for installation in challenging environments without space limitations. The switch offers advanced IPv6/IPv4 management interfaces, extensive L2/L4 switching functions, and Layer 3 static routing capabilities. It is built to operate stably in temperature ranges from -40 to 75°C and supports DIN rail or wall mounting.

Figure 1: Planet IGS-5225-4T2S Industrial L2+ Managed Switch. An image showing the Planet IGS-5225-4T2S Industrial L2+ Managed Switch. The device is dark blue, compact, and features four copper Ethernet ports and two SFP fiber ports on its front panel. A green terminal block for power input is visible on the top.

2. Tärkeimmät ominaisuudet

• Portit: 4 10/100/1000TX + 2 100/1000X SFP (Managed Switch)
• Kytkimen kangas: 12 Gbps / estoton
• Suorituskyky: 8.9 Mpps @ 64 tavua
• Maks. Tehon kulutus: 6.3W / 21.6BTU (power on w/o any connection), 8.5W/29.2BTU (full loading)
• Tukee: IEEE 1588v2 Transparency, ERPS Ring, DIDO
• Redundant Ring Technology: Incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) and Spanning Tree Protocol (802.1s MSTP) for rapid self-recovery.
• Vikahälytys: Provides event alert function and fault alarm features to diagnose abnormal device behavior and network connection issues.
• Teollinen muotoilu: IP30 rugged, compact-sized case, operating temperature range from -40 to 75°C, supports DIN rail or wall mounting.

3. Asennus ja asennus

Follow these steps to properly set up and install your IGS-5225-4T2S switch:

1. Pura laite pakkauksesta: Carefully remove the switch from its packaging and inspect for any physical damage. Ensure all components are present.
2. Asennus: The switch supports DIN rail or wall mounting. Choose the appropriate method for your industrial environment. Ensure adequate ventilation around the device.
3. Virtaliitäntä: Connect the redundant power input to a suitable power source using the provided terminal block. Ensure the power supply matches the switch's voltage requirements. The redundant power system enhances reliability.
4. Verkkoyhteydet:
   • Connect Ethernet cables (RJ45) to the 4 10/100/1000TX copper ports for standard network devices.
   • Insert compatible 100/1000X SFP modules into the 2 SFP slots, then connect fiber optic cables as required for extended distance connections.
5. Alkukokoonpano: Refer to the detailed management guide for initial IP address configuration and access to the IPv6/IPv4 management interfaces.

4. Käyttöohjeet

The IGS-5225-4T2S is a fully-managed switch offering extensive control over your network. Key operational aspects include:

• Hallintaliittymät: Access the switch's configuration and monitoring features via its IPv6/IPv4 management interfaces (e.g., web GUI, CLI, SNMP).
• L2/L4 Switching: Utilize the abundant Layer 2 and Layer 4 switching functions for traffic management, VLAN configuration, QoS, and security.
• Layer 3 Static Routing: Configure static routes to enable inter-VLAN routing and basic network segmentation without requiring a separate router.
• Redundant Ring Protection: The switch supports advanced ITU-T G.8032 ERPS and 802.1s MSTP. Configure these protocols to create resilient network topologies with rapid self-recovery (as fast as 20ms in simple ring networks) to prevent service interruptions.
• Modbus TCP: Integrate the switch into industrial automation systems using its Modbus TCP support for seamless communication and control.

5. Huolto

Regular maintenance ensures the longevity and optimal performance of your industrial switch:

• Ympäristönvalvonta: Ensure the operating environment remains within the specified temperature range (-40 to 75°C) and humidity levels. The IP30 rating protects against solid objects but not liquids.
• Puhdistus: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation openings are free from dust and debris.
• Laiteohjelmistopäivitykset: Tarkista valmistajalta websivustoa säännöllisesti laiteohjelmistopäivitysten varalta. Päivitysten asentaminen voi parantaa suorituskykyä, lisätä ominaisuuksia ja korjata tietoturva-aukkoja.
• Valvonta: Utilize the switch's event alert function and fault alarm features to proactively monitor its status. These features help diagnose abnormal device behavior or network connection breaks.
• Kaapelin hallinta: Ensure all network and power cables are securely connected and properly routed to prevent accidental disconnections or damage.

6. Vianmääritys

If you encounter issues with your IGS-5225-4T2S switch, consider the following troubleshooting steps:

• Ei virtaa:
  • Verify the power cable is securely connected to both the switch and the power source.
  • Check the power supply unit for proper operation.
  • Varmista, että virtalähde on aktiivinen.
• Ei verkkoyhteyttä:
  • Check the Ethernet or fiber optic cables for proper connection and integrity.
  • Verify the link/activity LEDs on the switch ports. If off, check the connected device or cable.
  • Confirm IP address settings and network configuration via the management interface.
  • If using SFP modules, ensure they are compatible and properly seated.
• Hidas verkon suorituskyky:
  • Check for network loops (though ERPS/MSTP should prevent this, misconfiguration can occur).
  • Monitor port utilization and error rates via the management interface.
  • Ensure connected devices are operating at their expected speeds (e.g., Gigabit).
• Management Interface Inaccessible:
  • Varmista, että tietokoneesi IP-osoite on samassa aliverkossa kuin kytkimen hallinta-IP-osoite.
  • Kokeile pingata kytkimen IP-osoitetta.
  • If necessary, perform a factory reset (refer to the full product manual for instructions, as this will erase configurations).
• Fault Alarm Triggered:
  • Consult the switch's log or alarm status via the management interface to identify the specific cause of the alarm.
  • Address the underlying issue indicated by the alarm (e.g., power failure, port link down).

For more complex issues, refer to the comprehensive technical documentation or contact Planet Technology support.

7. Tekniset tiedot

8. Takuutiedot

For information regarding the warranty for your Planet IGS-5225-4T2S switch, please refer to the official Planet Technology warranty policy.

To check if your product is eligible for the PlanetechPRO Lifetime Warranty, visit the following link:

https://planetechusa.com/planetechpro-covered-products/

9. Tekninen tuki

If you require further assistance or encounter issues not covered in this manual, please contact Planet Technology's technical support team. Have your product model number (IGS-5225-4T2S) and serial number ready when contacting support.

For support resources and contact information, please visit the official Planet Technology websivusto.