Danfoss EVR 3 -magneettiventtiilin (malli 032F1204) käyttöohje

1. Johdanto

This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the Danfoss EVR 3 Solenoid Valve, model 032F1204. Please read this manual thoroughly before attempting any procedures to ensure proper function and to prevent potential hazards.

2. Tuote ohiview

The Danfoss EVR 3 is a normally closed (NC) solenoid valve designed for various industrial and refrigeration applications. It features 3/8 inch ODF (Outside Diameter Flared) connections, ensuring a secure and leak-tight fit. This valve is engineered for reliability and precise control of fluid flow.

Kuva 2.1: Edessä view of the Danfoss EVR 3 Solenoid Valve with the solenoid coil installed. This image highlights the main body, ODF connections, and the attached coil with its specifications.

Kuva 2.2: Takaosa view of the Danfoss EVR 3 Solenoid Valve, indicating the flow direction with an arrow and displaying regulatory markings.

Kuva 2.3: The Danfoss EVR 3 Solenoid Valve (032F1204) shown with its original packaging box, displaying product details and "Made in Poland" label.

3. Turvallisuustiedot

• Always disconnect power before installing, servicing, or removing the solenoid valve.
• Varmista, että järjestelmän paine on vapautettu ennen venttiilin parissa työskentelyä.
• Käytä asianmukaisia ​​henkilönsuojaimia, kuten suojalaseja ja -käsineitä.
• Asennuksen ja huollon saa suorittaa vain pätevä henkilöstö.
• Verify that the valve's specifications (pressure, temperature, fluid compatibility) match the application requirements.
• Avoid exposing the valve to excessive mechanical stress or vibration.

4. Asennus

4.1 Asennusta edeltävät tarkastukset

• Tarkasta venttiili mahdollisten kuljetuksen aikaisten vaurioiden varalta.
• Confirm that the model number (032F1204) and specifications match your order and application.
• Ensure all necessary tools and fittings are available.

4.2 Asennus ja liitäntä

1. Mount the valve in a position that allows for easy access for maintenance and inspection. The valve can be installed in any position, but it is recommended to install with the coil upwards to prevent accumulation of debris.
2. Ensure the flow direction arrow on the valve body aligns with the system's fluid flow.
3. Connect the 3/8 inch ODF pipes to the valve's inlet and outlet ports. Use appropriate flaring tools and techniques to ensure a leak-free connection.
4. Tighten connections to the manufacturer's recommended torque specifications to prevent leaks without over-stressing the valve body.

4.3 Sähköliitäntä

• Varmista virtalähteen voltage and frequency match the specifications of the solenoid coil.
• Connect the solenoid coil to the appropriate electrical circuit. Follow local electrical codes and safety standards.
• Kiinnitä kaikki sähköliitännät vahingossa tapahtuvan irtoamisen tai oikosulkujen estämiseksi.

5. Käyttö

The Danfoss EVR 3 (032F1204) is a normally closed (NC) solenoid valve. This means that when the solenoid coil is de-energized (no power), the valve remains closed, preventing fluid flow. When the solenoid coil is energized (power applied), the valve opens, allowing fluid to pass through.

• Käämin virittäminen: Määritetyn tilavuuden käyttäminentage to the solenoid coil will open the valve.
• Käämin jännitteettömyys: Removing power from the solenoid coil will close the valve.

Monitor system pressure and flow rates after initial operation to ensure proper function and detect any anomalies.

6. Huolto

6.1 Rutiinitarkastus

• Periodically check for external leaks around the connections and valve body.
• Inspect the solenoid coil for any signs of overheating, damage, or loose connections.
• Kuuntele käytön aikana epätavallisia ääniä, jotka voivat viitata sisäisiin ongelmiin.

6.2 Puhdistus

• Keep the exterior of the valve clean and free from dust, dirt, and corrosive substances.
• If internal cleaning is required, consult a qualified technician or Danfoss service representative. Disassembly by untrained personnel can void warranty and cause damage.

6.3 Käämin vaihto

If the solenoid coil fails, it can typically be replaced without removing the entire valve from the system. Ensure the power is disconnected before attempting coil replacement. Refer to the specific coil's instructions for detailed replacement procedures.

7. Vianmääritys

8. Tekniset tiedot

9. Takuu ja tuki

Jos haluat tietoja tuotteen takuusta, teknisestä tuesta tai huollosta, ota yhteyttä suoraan Danfossiin tai käy heidän virallisessa verkkosivustossaan. website. Danfoss provides comprehensive support for its products to ensure customer satisfaction and optimal performance.

Danfossin virallinen Websivusto: www.danfoss.com