Johdanto
Thank you for choosing the BLACK+DECKER 60V MAX Cordless Hedge Trimmer LHT360CFF. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your hedge trimmer. Please read this manual thoroughly before first use and keep it for future reference.
Tärkeitä turvallisuusohjeita
VAROITUS: Lue kaikki turvallisuusvaroitukset ja -ohjeet. Varoitusten ja ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon ja/tai vakavan vamman.
- Always wear eye protection and heavy-duty gloves when operating the hedge trimmer.
- Keep hands and all body parts away from the blades.
- Älä käytä trimmeriä märissä olosuhteissa tai sähköjohtojen lähellä.
- Varmista ennen käyttöä, että akku on ladattu täyteen.
- Inspect the trimmer for damage before each use.
- Pidä lapset ja sivulliset poissa käyttöalueelta.
Asennus
1. Akun asennus ja lataus
Insert the 60V MAX battery into the battery port until it clicks into place. To charge, remove the battery and place it into the BLACK+DECKER 60V MAX charger. Ensure the charger is connected to a standard power outlet. The indicator light on the charger will show the charging status.

Image: User operating the BLACK+DECKER 60V MAX Cordless Hedge Trimmer. The image shows a person wearing safety glasses and gloves, holding the hedge trimmer and actively trimming a hedge. The 60V battery pack is visible on the tool.
2. Blade Guard Removal
Before operation, carefully remove the blade sheath from the cutting blades. Always replace the blade sheath when the trimmer is not in use or during storage.
Käyttöohjeet
1. Trimmerin käynnistäminen ja pysäyttäminen
- To start, grasp the front handle and the rear handle firmly.
- Depress the lock-off button (if present) and squeeze the trigger switch.
- Pysäyttääksesi, vapauta liipaisinkytkin.
2. Leikkaustekniikat
Hold the trimmer with both hands, ensuring a balanced stance. Use a sweeping motion to cut hedges. For vertical surfaces, begin at the bottom and sweep upwards. For horizontal surfaces, hold the trimmer at a slight angle to guide clippings away.
3. Using the POWERCUT™ Feature
The POWERCUT™ feature allows you to power through jams. If the blade gets stuck on a thick branch, press the POWERCUT™ button. This will momentarily increase power to clear the obstruction.
4. Utilizing the SAWBLADE™ Tip
The SAWBLADE™ tip is designed to cut branches up to 1.5 inches thick. Position the saw blade tip over the branch and apply steady pressure to cut through.
Video: Demonstrates the features of the BLACK+DECKER 60V MAX Hedge Trimmer, including the POWERCUT™ function for clearing jams and the SAWBLADE™ tip for cutting thicker branches. It also highlights the soft grip for user comfort and the 3/4 inch cut capacity.
Huolto
1. Terän hoito
After each use, clean the blades with a stiff brush to remove debris. Apply a light machine oil or blade lubricant to the blades to prevent rust and ensure smooth operation.
2. Varastointi
Always replace the blade sheath before storing the trimmer. Store the trimmer in a dry, secure location out of reach of children. Remove the battery before long-term storage.
3. Akun hoito
Store batteries in a cool, dry place. Do not store batteries in direct sunlight or where temperatures can exceed 104°F (40°C). For long-term storage, charge batteries fully every 6 months.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Trimmeri ei käynnisty | Akku ei ole asetettu oikein tai se on tyhjä. | Varmista, että akku on täysin paikallaan ja ladattu. |
| Blades jam frequently | Cutting material too thick; blades dull or dirty. | Use POWERCUT™ feature; clean and lubricate blades; sharpen or replace blades if necessary. |
| Heikentynyt leikkausteho | Dull blades; low battery charge. | Sharpen or replace blades; recharge battery. |
Tekniset tiedot
- Malli: LHT360CFF
- Merkki: MUSTA+KANSI
- Virtalähde: Paristokäyttöinen (60 V MAX*)
- Terän pituus: 24 tuumaa
- Leikkausleveys: 24 tuumaa
- Tuotteen paino: 8.4 puntaa
- Tuotteen mitat: 30 cm P x 8 cm L x 7 cm K
- Terän materiaali: Metalli
- Ominaisuudet: POWERCUT™ feature, SAWBLADE™ tip (cuts up to 1.5 inches thick)
*Akun enimmäistilavuustage (ilman työmäärää mitattuna) on 60 volttia. Nimellinen voltage on 54.
Takuu ja tuki
For warranty information, technical support, or to order replacement parts, please refer to the official BLACK+DECKER websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Säilytä ostokuitti takuuvaatimuksia varten.





