1. Johdanto
This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your APC Smart-UPS SRT 5000VA 208V. Please read this manual thoroughly before attempting to install or operate the UPS. Retain this manual for future reference.
The APC Smart-UPS SRT 5000VA 208V is an Uninterruptible Power Supply (UPS) designed to provide protected power to electronic equipment. It safeguards connected equipment from power outages, sags, surges, and other power disturbances.
2. Turvallisuustiedot
Observe all warnings and operating instructions in this manual. Failure to do so may result in injury or equipment damage.
Yleinen turvallisuus
- Tämä UPS on tarkoitettu vain sisäkäyttöön.
- Älä käytä tätä UPS-laitetta suorassa auringonpaisteessa, kosketuksissa nesteiden kanssa tai paikoissa, joissa on liikaa pölyä tai kosteutta.
- Ensure the ventilation openings on the UPS are not blocked.
- Do not connect appliances that would overload the UPS.
- Akkujen huollon tulee suorittaa tai valvoa henkilökunnan, joka tuntee akut ja tarvittavat varotoimenpiteet.
Sähköturvallisuus
- The UPS contains internal batteries that may present a shock hazard even when disconnected from the AC power.
- The UPS must be connected to a grounded AC outlet.
- Do not open the UPS enclosure. There are no user-serviceable parts inside.
- Use only the specified power cords and connectors.
3. Pakkauksen sisältö
Carefully unpack the UPS and inspect for shipping damage. If any damage is found, notify the carrier and dealer. The package should contain the following items:
- APC Smart-UPS SRT 5000VA 208V Unit
- Dokumentaatio-CD
- Turvallisuusohje
- USB-kaapeli
- Sarjakaapeli
- Network Management Card (if included with specific model variant)
- Rack-mounting hardware (if applicable)
- Tower stand (if applicable)
4. Asennus
4.1 Sivuston valmistelu
Before installing the UPS, ensure the installation site meets the following requirements:
- Lämpötila: 0 °C - 40 °C (32 °F - 104 °F)
- Kosteus: Suhteellinen kosteus 0–95 %, ei tiivisty
- Tilaus: Allow adequate space around the UPS for proper ventilation.
- Paino: The UPS is heavy. Use appropriate lifting techniques and personnel.
4.2 Fyysinen asennus
The SRT 5000VA can be installed in a tower configuration or rack-mounted. Refer to the specific installation guide for detailed rack-mounting instructions.
- Place the UPS on a stable, level surface. If using the tower stand, ensure it is securely attached.
- Ensure all ventilation openings are clear.
4.3 Kytkentälaitteet
Connect your equipment to the output receptacles on the rear panel of the UPS. Do not overload the UPS. Refer to the specifications section for capacity details.
Image: Rear panel of the UPS, illustrating connection points for input power, output receptacles, and communication ports.
4.4 Ensimmäinen käynnistys
- Connect the UPS input power cord to a grounded 208V AC outlet.
- Press the power button on the front panel to turn on the UPS.
- The UPS will perform a self-test. The display will show status information.
5. UPS-laitteen käyttö
5.1 Etupaneelin näyttö
The front panel LCD provides real-time status information and allows configuration of UPS settings. Use the navigation buttons to scroll through menus and select options.
Kuva: Yksityiskohtainen view of the UPS front panel display, indicating current operational status and settings.
5.2 Perustoiminnot
- Virta päälle/pois: Press the power button to turn the UPS on or off.
- Itsetestaus: Initiate a manual self-test through the LCD menu to verify battery and UPS functionality.
- Hälytyksen mykistys: Temporarily silence audible alarms via the front panel button.
- Akun tila: Monitor battery charge level and estimated runtime on the display.
6. Huolto
6.1 Pariston vaihto
The UPS uses hot-swappable, user-replaceable battery modules. Replace batteries only with APC-approved replacement battery cartridges (RBCs). Refer to the specific battery replacement guide for detailed instructions.
Varoitus: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the manufacturer's instructions and local regulations.
6.2 Puhdistus
Puhdista UPS-laitteen ulkopinta pehmeällä,amp cloth. Do not use solvents or abrasive cleaners. Ensure ventilation openings are free of dust and debris.
7. Vianmääritys
This section provides solutions to common issues. If a problem persists after attempting these steps, contact APC technical support.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| UPS ei käynnisty | No input power; discharged battery | Verify input power connection; allow UPS to charge for several hours. |
| UPS piippaa jatkuvasti | On battery; low battery; overload | Check input power; allow battery to charge; reduce connected load. |
| Overload indicator is lit | Too much equipment connected | Disconnect non-essential equipment until the indicator turns off. |
| Akun käyttöaika on odotettua lyhyempi | Battery nearing end of life; high load | Perform a battery self-test; consider replacing the battery module; reduce connected load. |
8. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Malli | SRT5KXLT |
| Kapasiteetti | 5000 VA / 4500 W |
| Tulo Voltage | 208V |
| Lähtö Voltage | 208V |
| Akun tyyppi | Lyijyhappo |
| Mitat (K x L x S) | 17 cm x 5.1 cm x 28.3 cm |
| Paino | 2 kiloa |
| Käyttölämpötila | 0 °C - 40 °C (32 °F - 104 °F) |
9. Takuu ja tuki
9.1 Takuutiedot
APC provides a standard warranty for this product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official APC websivusto. Ostotodistus vaaditaan kaikkiin takuuvaatimuksiin.
9.2 Tekninen tuki
For technical assistance, troubleshooting, or service inquiries, please contact APC customer support. Have your product model number (SRT5KXLT) and serial number ready when contacting support.
You can find contact information on the APC website or in the documentation provided with your UPS.
