1. Johdanto
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinel XLED Home 2 S Outdoor LED Floodlight with Motion Sensor. Please read these instructions carefully before initial use and retain them for future reference.
The Steinel XLED Home 2 S is an energy-efficient LED floodlight designed for outdoor use, featuring an integrated 180° infrared motion sensor. It provides bright, warm white illumination for areas such as entrances, courtyards, gardens, and patios.
2. Turvallisuusohjeet
- Sähköinen asennus: Asennuksen saa suorittaa vain pätevä sähköasentaja kansallisten johdotusmääräysten ja paikallisten sähkömääräysten mukaisesti.
- Virran katkaisu: Always disconnect the power supply before performing any work on the unit.
- Voitage: Varmista syöttötilavuustage matches the product's specifications (220-240 V / 50-60 Hz).
- Vahingoittaa: Do not operate the product if it is damaged. Contact qualified service personnel for repairs.
- Muutokset: Do not modify the product in any way. Unauthorized modifications can lead to hazards and void the warranty.
- Toimintaympäristö: This product is designed for outdoor use (IP44 rated). Ensure it is installed in a location protected from direct water jets and extreme weather conditions.
3. Pakkauksen sisältö
Varmista pakkauksesta purkamisen yhteydessä, että kaikki osat ovat mukana ja vahingoittumattomia:
- Steinel XLED Home 2 S LED Floodlight
- Mounting material (2x screws, 2x wall plugs, 3x spacers, 2x sealing plugs)
- Sensor covers for detection zone adjustment
- Käyttöohje
4. Tuote ohiview
The Steinel XLED Home 2 S is an advanced outdoor LED floodlight featuring a highly efficient LED panel and an integrated motion sensor for automated lighting. Its design allows for flexible adjustment of both the light panel and the sensor.
Kuva 1: Edessä view of the Steinel XLED Home 2 S LED Floodlight. This image shows the main unit with its adjustable LED panel and the motion sensor located beneath.
Kuva 2: Technical drawing illustrating the dimensions of the Steinel XLED Home 2 S. The dimensions are approximately 161mm (width) x 180mm (depth) x 218mm (height).
Tärkeimmät ominaisuudet:
- Tehokas LED: Consumes only 13.7 W, providing 1550 lumens of warm white light (3000 K).
- Adjustable LED Panel: The LED panel can be flexibly oriented up to 180° to direct light precisely where needed.
- 180° Infrared Motion Sensor: Reliably detects movement up to 10 meters. The sensor can be adjusted vertically by 180° and horizontally by 90°.
- Adjustable Detection Zone: Supplied covers allow for customization of the sensor's detection area.
- Pitkä LED-käyttöikä: LEDs are designed for a lifespan of 50,000 hours, eliminating the need for frequent bulb changes.
- Verkkoominaisuudet: Up to 10 floodlights can be interconnected for synchronized operation.
5. Asennus
The Steinel XLED Home 2 S is designed for wall mounting. For electrical connections, it is strongly recommended to consult a qualified electrician.
Asennusvaiheet:
- Valitse sijainti: Select a suitable outdoor location for wall mounting, ensuring the desired detection area is covered by the sensor.
- Valmistele johdotus: Ensure the power supply is disconnected at the main circuit breaker. Prepare the electrical wires for connection.
- Kiinnityspohjalevy: Secure the floodlight's base plate to the wall using the provided screws and wall plugs. Use spacers if necessary to ensure a flush fit or accommodate wiring.
- Kytke sähköjohdot: Connect the live (L), neutral (N), and earth (PE) wires to the corresponding terminals on the floodlight. Ensure connections are secure.
- Kiinnitä valonheitin: Carefully attach the floodlight unit to the mounted base plate and secure it with the small screw located at the bottom of the light.
- Palauta virta: Kun asennus on valmis ja kaikki liitännät on tehty kunnolla, kytke virta takaisin piiriin.
Kuva 3: An installed Steinel XLED Home 2 S floodlight illuminating an outdoor pathway and entrance at night.
6. Käyttöohjeet
The Steinel XLED Home 2 S features adjustable settings for its motion sensor to customize its operation according to your needs.
Liiketunnistimen säätö:
The motion sensor's settings can be adjusted using the rotary knobs located on the underside of the sensor unit.
- Time Setting (Temporisation): This knob controls how long the light remains on after motion is detected. The adjustable range is typically from 8 seconds to 35 minutes.
- Twilight Setting (Crépuscularité): This knob determines the ambient light level at which the sensor becomes active. The adjustable range is from approximately 2 lux (dark) to 2000 lux (daylight). Set it to a lower lux value for activation only in darker conditions, or a higher value for activation even in brighter conditions.
Adjusting Detection Zone:
The 180° infrared motion sensor can detect movement up to 10 meters. To prevent unwanted activations (e.g., from passing traffic or pets), you can precisely adjust the detection zone.
- Anturin suunta: The sensor head can be physically rotated vertically by 180° and horizontally by 90° to aim the detection field.
- Detection Zone Covers: Use the provided covers to mask off specific segments of the detection area. Attach these covers to the sensor lens as needed.
Kuva 4: Diagram illustrating the motion sensor's detection range and how it covers an area in front of a building. The orange shaded area indicates the sensor's field of view.
7. Huolto
The Steinel XLED Home 2 S is designed for minimal maintenance. The integrated LEDs have a long lifespan and do not require replacement.
- Puhdistus: Puhdista valonheittimen pinta ja anturin linssi säännöllisesti pehmeällä,amp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic components.
- Tarkastus: Regularly inspect the unit for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified professional.
8. Vianmääritys
If you encounter issues with your Steinel XLED Home 2 S, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty. | No power supply; Twilight setting too high; Sensor faulty. | Check circuit breaker; Adjust twilight setting to a lower lux value; Contact support. |
| Valo palaa jatkuvasti. | Continuous motion in detection zone; Time setting too long; Wiring error. | Adjust detection zone with covers; Reduce time setting; Consult electrician. |
| Valo syttyy ilman näkyvää liikettä. | Detection zone too wide; Environmental factors (e.g., heat sources, small animals). | Adjust sensor orientation; Use detection zone covers; Relocate if necessary. |
| Valo välkkyy tai on himmeä. | Unstable power supply; Internal fault. | Check electrical connections; Contact support. |
9. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Mallinumero | 33071 |
| Merkki | Steinel |
| Virtalähde | 220 - 240 V / 50 - 60 Hz |
| Virrankulutus | 13.7 wattia |
| Valovirta | 1550 lumenia |
| Värilämpötila | 3000 Kelvin (lämmin valkoinen) |
| Värintoistoindeksi (CRI) | 80 |
| LEDin käyttöikä | 50,000 tuntia |
| Liiketunnistimen tyyppi | Infrapuna (PIR) |
| Havaintokulma | 180° |
| Havaintoalue | Jopa 10 metriä |
| Aika-asetus | 8 sekuntia - 35 minuuttia |
| Hämärän asetus | 2–2000 luksia |
| Ingress Protection (IP) -luokitus | IP44 |
| Materiaali | Muovi, akryyli |
| Mitat (P x L x K) | 16.1 x 18.0 x 21.8 cm (noin 7.64 x 7.09 x 6.34 tuumaa) |
| Paino | 0.570 kg (noin 1.26 lbs) |
| Yhteydet | Networkable (up to 10 floodlights) |
10. Takuu ja tuki
Steinel products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or visit the official Steinel website. In case of technical issues or questions not covered in this manual, please contact Steinel customer support or your local distributor.
Lisätietoja saat osoitteesta Steinelin merkkikauppa.
