Tuote loppuview
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Whirlpool W10853723 Water Inlet Valve. This is a genuine OEM replacement part designed for Whirlpool appliances, ensuring compatibility and optimal performance.
The Whirlpool W10853723 Water Inlet Valve is a crucial component responsible for controlling the flow of water into your appliance. It features a durable brass material and compression inlet/outlet connection types, built to Whirlpool's engineering standards.
Tärkeitä turvallisuustietoja
Before beginning any installation or repair, ensure the appliance is disconnected from its power source and water supply. Always wear appropriate personal protective equipment, such as gloves and safety glasses. If you are unsure about any step, consult a qualified technician.
- Disconnect power and water: Always turn off the electrical power and water supply to the appliance before performing any service or maintenance.
- Use genuine parts: Only use genuine Whirlpool replacement parts to ensure proper fit, function, and safety.
- Consult service manual: Refer to your specific appliance's service manual for detailed, model-specific instructions.
- Työalueen turvallisuus: Keep children and pets away from the work area during installation or repair.
Tuote Views
Asennusohjeet
Replacing the water inlet valve requires careful attention to detail. Follow these general steps, but always refer to your specific appliance's service manual for precise instructions and safety warnings.
- Valmistelu: Disconnect the appliance from the electrical power supply by unplugging it or turning off the circuit breaker. Turn off the water supply to the appliance at the shut-off valves. Locate the water inlet valve, typically at the back of the appliance where the water hoses connect.
- Irrota letkut: Use a wrench to carefully disconnect the hot and cold water inlet hoses from the old valve. Be prepared for some residual water to drain; have a towel or shallow pan ready.
- Remove Wiring: Disconnect any electrical wiring connected to the valve solenoids. It is recommended to take a photo or make a diagram to remember the correct connections for reassembly.
- Irrota vanha venttiili: Unmount the old water inlet valve from the appliance. This may involve removing screws, clips, or other fasteners. Note its orientation for installing the new part.
- Asenna uusi venttiili: Position the new Whirlpool W10853723 Water Inlet Valve in place and secure it with the screws or clips previously removed. Ensure it is firmly seated and correctly oriented.
- Kytke johdotus: Reconnect the electrical wiring to the new valve's solenoids, matching the connections noted earlier. Ensure all connections are secure.
- Liitä letkut: Attach the hot and cold water inlet hoses to the new valve. Hand-tighten first, then use a wrench for a snug fit, being careful not to overtighten, which could damage the connections.
- Testata: Slowly turn on the water supply and carefully check all connections for leaks. Reconnect the appliance to the electrical power supply and run a test cycle to ensure proper operation and no leaks.
Toiminta
The water inlet valve operates automatically based on the appliance's cycle. It receives electrical signals from the appliance's control board to open and allow water into the machine, and then closes to stop the flow once the required water level or temperature is reached. For proper functioning, ensure the water supply is always connected and turned on.
Huolto
Regular maintenance can extend the life of your water inlet valve and prevent common issues. Periodically check the water inlet screens for debris and clean them if necessary. Inspect hoses for cracks or leaks.
- Inspect Water Screens: Annually, or if you notice reduced water flow, disconnect the water hoses from the valve and check the small screens inside the valve's inlet ports for sediment or debris. Clean them with a small brush or rinse under running water.
- Tarkista vuodot: Regularly inspect the area around the valve and water hoses for any signs of water leaks or drips. Address any leaks immediately to prevent water damage.
- Letkun kunto: Ensure water supply hoses are in good condition, free from kinks, cracks, bulges, or signs of wear. Replace damaged hoses promptly.
Vianetsintä
If your appliance is experiencing water-related issues, the water inlet valve may be a factor. Here are some common symptoms and potential solutions:
| Oire | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei vettä pääse laitteeseen | Clogged inlet screens, faulty valve solenoid, no water supply | Clean inlet screens, test solenoids (consult technician), check water supply valve. |
| Appliance overfills or continuously fills | Faulty valve solenoid, high water pressure | Replace valve, check household water pressure regulator. |
| Vesivuotoja venttiilin alueelta | Loose hose connections, cracked valve housing, faulty seals | Tighten connections, replace valve, replace seals. |
| Alhainen veden virtaus | Partially clogged inlet screens, low household water pressure | Clean inlet screens, check household water pressure. |
Tekniset tiedot
- Mallinumero: W10853723
- Merkki: Whirlpool
- Materiaali: Messinki
- Tuloliitäntätyyppi: Puristus
- Lähtöliitäntätyyppi: Puristus
- Porttien määrä: 2
- Tuotteen mitat (P x L x K): 11.75 x 5.25 x 5.75 tuumaa
- Tuotteen paino: 0.16 unssia
- Väri: Sininen
- Sertifikaatit: UL, CSA, NSF, RoHS, EPA, ANSI B16.34, UPC, FM, WaterSense, ISO 9001, OSHA, CE, ASSE
Virallinen tuotevideo
This video from Whirlpool Service Parts highlights the importance of using genuine OEM parts for Whirlpool appliances, emphasizing quality, durability, and proper fit. It showcases the manufacturing and testing processes that ensure these parts meet rigorous engineering standards.
Takuu ja tuki
This genuine Whirlpool replacement part is covered by Whirlpool's standard warranty. For specific warranty details, please refer to the documentation included with your original appliance or visit the official Whirlpool websivusto.
For technical assistance, to locate authorized service providers, or to purchase additional genuine parts, please visit the Whirlpool Store on Amazon or the official Whirlpool support websivusto.