DSC-turvahälytysjärjestelmä - HS2LCD Power-sarjan Neo-täysviesti-LCD-näppäimistön käyttöohje

1. Johdanto ja loppuview

The DSC HS2LCD PowerSeries Neo Full Message LCD Keypad is an essential component of your DSC PowerSeries Neo security alarm system. This hardwired keypad provides a clear, full-message liquid crystal display (LCD) for easy system status viewing, event logging, and user interaction. It allows for arming and disarming the system, bypassing zones, and performing various user functions.

This keypad is designed for compatibility with DSC PowerSeries Neo control panels, including models HS2016, HS2032, HS2064, and HS21218. For detailed system programming and advanced features, refer to the installer manual for your specific PowerSeries Neo control panel.

2. Turvallisuustiedot

Ammattimainen asennussuositus: Installation of this keypad and integration with a security system should be performed by a qualified security professional. Improper installation can lead to system malfunction or compromise security.
Sähköturvallisuus: Ensure all power to the alarm control panel is disconnected before performing any wiring or installation procedures. Work with low voltagvain e johdotus.
Ympäristöolosuhteet: Install the keypad in a dry indoor location, away from direct sunlight, extreme temperatures, and high humidity.
Vahingoittaa: Do not attempt to open or service the keypad yourself. Refer all servicing to qualified personnel.

3. Pakkauksen sisältö

Varmista, että paketti sisältää seuraavat kohteet:

DSC HS2LCD PowerSeries Neo Full Message LCD Keypad
Installation Guide / Quick Start Guide (may be included with the main control panel)

DSC HS2LCD Keypad in its packaging, showing the closed keypad with a green protective film over the screen.

Figure 1: DSC HS2LCD Keypad as received, with protective film.

This image shows the DSC HS2LCD keypad, still partially in its original packaging. The keypad is white with a green protective film covering the LCD screen area. The DSC logo is visible on the packaging and faintly on the keypad itself.

4. Asennus ja asennus

The HS2LCD keypad is designed for professional hardwired installation. The following steps provide a general overview; always refer to the detailed installation instructions provided with your DSC PowerSeries Neo control panel for specific wiring diagrams and mounting procedures.

4.1. Näppäimistön asentaminen

Valitse sopiva sisäpaikka, tyypillisesti sisään-/uloskäyntipisteen läheltä, johon on helppo päästä ja joka on näkyvissä.
Avaa näppäimistön kotelo varovasti päästäksesi käsiksi kiinnitysreikiin.
Secure the keypad to the wall using appropriate screws and anchors (not included), ensuring it is level and firmly attached.

4.2. Johdotusliitännät

The HS2LCD keypad connects to the PowerSeries Neo control panel via a 4-wire Keybus connection. Ensure power to the control panel is OFF before making any connections.

Connect the Red terminal on the keypad to the Red (Aux+) terminal on the control panel.
Connect the Black terminal on the keypad to the Black (Aux-) terminal on the control panel.
Connect the Yellow terminal on the keypad to the Yellow (Keybus Data) terminal on the control panel.
Connect the Green terminal on the keypad to the Green (Keybus Data) terminal on the control panel.

Huomautus: Proper polarity and secure connections are crucial for reliable operation. Consult your control panel's installation manual for specific terminal locations and wiring best practices.

4.3. Ensimmäinen käynnistys

Once all wiring is complete and verified, restore power to the control panel. The keypad should power on and display initial system messages. The installer will then configure the keypad's address and integrate it into the system.

5. Käyttöohjeet

5.1. Keypad Layout and Display

DSC HS2LCD Keypad with its cover open, revealing the numeric and function buttons.

Figure 2: DSC HS2LCD Keypad with cover open.

This image displays the DSC HS2LCD keypad with its front cover flipped down, exposing the full alphanumeric keypad. The LCD screen is visible at the top, above the numbered keys (0-9), asterisk (*), and pound (#) keys, along with various function buttons.

The HS2LCD features a full-message LCD display that provides clear text prompts and system status. Below the display, you will find a standard numeric keypad (0-9, *, #) and dedicated function buttons for common operations.

5.2. Basic System Operations

All operations require a valid 4-digit or 6-digit user code.

Arming Away: To arm the system when all occupants are leaving, enter your Käyttäjäkoodi. The system will provide an exit delay.
Arming Stay: To arm the system while occupants remain inside (bypassing interior zones), press the Pysyä button, then enter your Käyttäjäkoodi.
Asetuksen poistaminen: To disarm the system, enter your Käyttäjäkoodi. This will silence any alarms and restore the system to a disarmed state.
Ohitusvyöhykkeet: To temporarily remove a zone from the system's protection (e.g., a window left open), press the Ohittaa button, enter your Käyttäjäkoodi, then enter the 2-digit zone number(s) to bypass. Press # poistuaksesi.
ViewJärjestelmän tila: The LCD will display system status messages (e.g., "System Ready to Arm", "Not Ready", "Alarm Memory"). Use the arrow keys to scroll through messages if available.
Paniikkihälytykset: Dedicated panic buttons (often labeled F, A, P or with symbols) can be pressed and held for 2 seconds to activate immediate alarms (Fire, Auxiliary, Panic). Consult your installer for specific button assignments.

5.3. Käyttäjäkoodien vaihtaminen

To change a user code (if enabled by your installer):

Paina [*] [5].
Syötä omasi Pääkäyttäjäkoodi.
Enter the 2-digit Käyttäjänumero (e.g., 01 for User 1).
Syötä Uusi käyttäjäkoodi (4 or 6 digits).
Paina # poistuaksesi ohjelmoinnista.

Huomautus: Not all user codes have permission to change other codes. Consult your installer for user code management. For advanced programming, refer to the DSC PowerSeries Neo Installer Manual.

6. Huolto

Puhdistus: To clean the keypad, gently wipe the surface with a soft, dry cloth. For stubborn marks, slightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or spray liquids directly onto the keypad.
Säännölliset tarkastukset: Periodically check the keypad for any physical damage or loose connections. Ensure the display is clear and all buttons respond correctly.
Järjestelmän testaus: Follow your security provider's recommendations for regular system testing to ensure all components, including the keypad, are functioning correctly.

7. Vianmääritys

If you experience issues with your HS2LCD keypad, consider the following common problems and solutions. For complex issues or system-wide faults, contact your professional security installer.

Ongelma	Mahdollinen syy	Ratkaisu
Keypad display is blank or unresponsive.	No power to the keypad or control panel; loose wiring connection.	Check power to the control panel. Verify all 4 Keybus wires are securely connected at both the keypad and the control panel. Contact installer if issue persists.
Keypad beeps continuously or displays an error message.	System trouble condition (e.g., low battery, communication error, zone fault).	Paina *[]** -painiketta view trouble conditions on the LCD. Address the specific trouble (e.g., close open doors/windows). If it's a system fault, contact your installer.
Painikkeet eivät vastaa.	Keypad frozen; physical damage.	Try disarming the system if it's armed. If unresponsive, a power cycle of the main control panel (by an installer) may be required. If physically damaged, replacement may be necessary.
Järjestelmä ei virity.	Zones are open; system not ready.	Check the keypad display for "Not Ready" messages. Close all protected doors and windows. Bypass any zones you wish to leave open.

Tärkeää: The DSC HS2LCD keypad is a component of a larger security system. Many issues may originate from the main control panel or other connected devices. Always consult your security system's comprehensive manual or contact your professional installer for advanced diagnostics and repairs.

8. Tekniset tiedot

Merkki	DSC
Mallinumero	HS2LCD (Part Number), 4331024609 (Item Model Number)
UPC	702188341806
Väri	Valkoinen
Virtalähde	Corded Electric (via control panel)
Yhteensopivat ohjauspaneelit	HS2016, HS2032, HS2064, HS21218 (DSC PowerSeries Neo)
Yhteystekniikka	Wired (Keybus)
Asennustyyppi	Ammattimainen kiinteästi kytketty
Valvontamenetelmä	Kosketus (painikkeet)
Tuotteen mitat (P x L x K)	9.8 x 7.3 x 2.2 tuumaa (24.9 x 18.5 x 5.6 cm)
Tuotteen paino	1.1 puntaa (0.5 kg)

9. Takuu ja tuki

Warranty information for the DSC HS2LCD keypad is typically provided by the manufacturer, DSC, and may be included with your main PowerSeries Neo control panel or available on the official DSC website. Warranty terms and conditions can vary.

For technical support, service, or warranty claims, please contact your professional security system installer or the authorized DSC distributor from whom the product was purchased. They are best equipped to provide assistance specific to your installed system.

You can also visit the official DSC website for product documentation, FAQs, and contact information for customer support.

	DSC PowerSeries Neo HS2LED/HS2ICON/HS2LCD -asennusohjeet Tämä asiakirja sisältää DSC PowerSeries Neo HS2LED-, HS2ICON(P)(RF)X- ja HS2LCD(P)(RF)X -näppäimistöjen asennusohjeet, joissa kerrotaan asennuksesta, johdotuksesta, ohjelmoinnista ja langattoman laitteen konfiguroinnista.
	DSC PowerSeries Neo Keypad Installation Guide HS2LED HS2ICON HS2LCD Comprehensive installation instructions for DSC PowerSeries Neo HS2LED, HS2ICON(P)(RF)X, and HS2LCD(RF)(P)X keypads, covering specifications, mounting, wiring, language programming, and wireless device setup. This guide provides detailed steps for installers to configure and troubleshoot the security keypads and compatible wireless devices.
	DSC PowerSeries Neo -näppäimistön asennus- ja ohjelmointiohje Kattava asennus-, ohjelmointi- ja vianmääritysopas DSC PowerSeries Neo HS2LED-, HS2ICN- ja HS2LCD-sarjan näppäimistöille. Opi turvajärjestelmäsi tekniset tiedot, kytkennät, laitteiden rekisteröinnin ja järjestelmän kokoonpanon.
	DSC PowerSeries Neo -näppäimistön asennus- ja ohjelmointiopas Kattava asennus- ja ohjelmointiopas DSC HS2LED-, HS2ICN(P)- ja HS2LCD(P)(RF)-turvajärjestelmien näppäimistöille. Opas kattaa ominaisuudet, johdotuksen ja konfiguroinnin optimaalisen suorituskyvyn saavuttamiseksi.
	DSC PowerSeries Neo -hälytyspaneelin käyttöopas Kattava käyttöopas DSC PowerSeries Neo -hälytyspaneelisarjalle, joka kattaa järjestelmän toiminnan, virittämisen/poiskytkentä, käyttökoodit, vikatilanteet, turvallisuusohjeet ja säädöksiä koskevat tiedot.
	DSC PowerSeries Neo HS2016/2032/2064/2128 -hälytyspaneelin käyttöopas Kattava käyttöopas DSC PowerSeries Neo HS2016-, HS2032-, HS2064- ja HS2128-hälytyspaneeleille. Opi järjestelmän toiminnasta, näppäimistön toiminnoista, järjestelmän virittämisestä/poiskytkentään, käyttökoodeista, vianmäärityksestä, turvallisuusohjeista ja turvajärjestelmäsi huollosta.

DSC HS2LCD, 4331024609

DSC HS2LCD PowerSeries Neo Full Message LCD Keypad