Barco CSE100

Barco CS-100 Wireless Presentation System

Käyttöopas

Johdanto

The Barco CS-100 is a standalone wireless presentation system designed to facilitate easy content sharing in small meeting and huddle rooms. It allows users to share content from their laptop or mobile device onto a presentation screen without the need for cables or extensive setup.

Tärkeimmät ominaisuudet:

Asennus

Follow these steps to set up your Barco CS-100 system:

  1. Liitä perusyksikkö: Connect the Barco CS-100 Base Unit to your display screen (projector, monitor, or TV) using an HDMI cable. Ensure the display is powered on and set to the correct HDMI input.
  2. Virta päälle: Connect the power adapter to the Base Unit and plug it into an electrical outlet. The unit will power on automatically.
  3. Initial Setup (if required): On first use, the Base Unit may display on-screen instructions for network configuration or firmware updates. Follow these prompts as necessary.
  4. Prepare ClickShare Button: The system comes with one ClickShare Button. This USB-powered device is used to share content from your PC or Mac.
  5. Install ClickShare App (Optional): For sharing content from mobile phones or tablets, download and install the official ClickShare App from your device's app store.
Barco CS-100 Wireless Presentation System Base Unit

Image: The Barco CS-100 Base Unit, a compact black device with a perforated top surface and the "ClickShare" and "BARCO" logos visible. This is the central unit for wireless presentations.

Käyttöohjeet

Sharing with the ClickShare Button:

  1. Plug in the Button: Insert the ClickShare Button into an available USB port on your PC or Mac.
  2. Suorita sovellus: The Button will automatically launch a small application. If it doesn't, navigate to the Button's drive and run the executable file.
  3. Click to Share: Once the application is running, click the physical button on the ClickShare Button. Your laptop's screen content will appear on the main display.
  4. Lopeta jakaminen: Click the Button again to stop sharing your screen.

Sharing with the ClickShare App (Mobile Devices):

  1. Yhdistä verkkoon: Ensure your mobile device (smartphone or tablet) is connected to the same Wi-Fi network as the Barco CS-100 Base Unit.
  2. Avaa sovellus: Launch the ClickShare App on your mobile device.
  3. Select Base Unit: The app will detect available ClickShare Base Units. Select your CS-100 unit from the list.
  4. Aloita jakaminen: Follow the in-app instructions to begin sharing your device's screen or specific content (e.g., documents, photos).

Note: The Barco CS-100 allows up to 8 users to connect, but only one user can share content on the screen at a time.

Suojausominaisuudet:

The CS-100 includes standard ClickShare security features such as encryption, login management, HTTPS, and the option to hide the SSID of the Base Unit's wireless network for enhanced security.

Huolto

Proper maintenance ensures the longevity and optimal performance of your Barco CS-100 system:

Vianetsintä

If you encounter issues with your Barco CS-100, refer to the following common problems and solutions:

OngelmaMahdollinen syy / Ratkaisu
Ei kuvaa näytöllä
  • Ensure HDMI cable is securely connected to both the Base Unit and the display.
  • Verify the display is powered on and set to the correct HDMI input.
  • Check if the Base Unit is powered on (power indicator light).
ClickShare Button not recognized
  • Kokeile toista tietokoneesi USB-porttia.
  • Ensure the ClickShare application launches automatically. If not, manually run the executable from the Button's drive.
  • Käynnistä tietokone uudelleen.
Lag or poor video quality
  • Ensure the Base Unit is not too far from the sharing device.
  • Minimize other wireless interference in the area.
  • Close unnecessary applications on your sharing device.
  • For video content, direct HDMI connection may offer better performance than wireless.
Mobile app cannot connect
  • Confirm your mobile device is connected to the same Wi-Fi network as the Base Unit.
  • Check network firewall settings if applicable.
  • Restart the ClickShare App and/or your mobile device.

Tekniset tiedot

OminaisuusYksityiskohta
MallinumeroCSE100
Suurin näytön tarkkuus1920x1080 (Full HD)
VideolähtöliitäntäHDMI
Tuotteen paino4.4 kiloa
Tuotteen mitat (PxLxK)10 x 6 x 6 tuumaa
VirtalähdeJohdollinen sähkö
Päivämäärä ensimmäinen saatavilla8. helmikuuta 2016

Takuu ja tuki

For detailed warranty information and technical support, please refer to the official Barco resources:

Aiheeseen liittyvät asiakirjat - CSE100

Preview Barco ICMP Software Release Notes v1.3.4.1
Detailed release notes for Barco's Integrated Cinema Media Processor (ICMP) software, version 1.3.4.1, covering new features, improvements, limitations, and known software defects for the ICMP system.
Preview Barco ClickShare CSE-200 -asennusopas
Tämä asennusopas sisältää kattavat ohjeet Barco ClickShare CSE-200 -langattoman esitysratkaisun asentamiseen ja käyttöön. Se kattaa ohjelmistoehdot, käyttöoikeussopimukset ja tukitiedot.
Preview Barco ClickSharen takuu- ja tukiopas
Yksityiskohtaista tietoa Barco ClickSharen takuuehdoista, SmartCare-eduista, tukikanavista ja tuotekohtaisesta kattavuudesta. Sisältää oikeuden, aktivoinnin ja tuotteen ylityksen.views.
Preview Barco ClickShare CSE-200 -asennusopas
Yksityiskohtainen asennusopas Barco ClickShare CSE-200 -langattomalle esitysjärjestelmälle, joka kattaa kokoushuoneiden asennuksen, konfiguroinnin, tekniset tiedot ja vianmäärityksen.
Preview Barco ClickShare C-5, C-10 Gen2 -asennusopas
Tämä asennusopas sisältää ohjeet Barco ClickShare C-5- ja C-10 Gen2 -järjestelmien käyttöönottoon ja asennukseen. Se kattaa yleiset suositukset, turvallisuusohjeet ja verkon käyttöönottovaatimukset.
Preview Barco ClickShare CX-30 -asennusopas
Tämä asennusopas sisältää kattavat ohjeet Barco ClickShare CX-30 -langattoman esitys- ja neuvottelujärjestelmän asentamiseen ja konfigurointiin. Se kattaa asennusmenetelmät, verkkointegraation, suojausasetukset ja vianmäärityksen optimaalisen yhteistyön varmistamiseksi kokoushuoneessa.