APC Smart-UPS SRT 10KVA Rack Mount UPS with 208/240V to 120V Step-Down Transformer User Manual

1. Johdanto

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your APC Smart-UPS SRT 10KVA Rack Mount Uninterruptible Power Supply (UPS) with an integrated 208/240V to 120V Step-Down Transformer. Please read this manual thoroughly before installing or operating the equipment.

The APC Smart-UPS SRT 10KVA is designed to provide reliable power protection for critical electronic equipment, ensuring continuous operation during power outages and fluctuations. The integrated step-down transformer allows for flexible deployment in environments requiring 120V output from a 208/240V input source.

2. Turvallisuustiedot

Tärkeitä turvallisuusohjeita:

• Lue nämä ohjeet huolellisesti ja tutustu laitteeseen ennen kuin yrität asentaa, käyttää, huoltaa tai huoltaa sitä.
• This UPS contains internal batteries and may present a shock hazard even when disconnected from the AC mains.
• Paristojen huollon saa suorittaa tai valvoa akkuja ja tarvittavia varotoimia tunteva henkilökunta. Pidä valtuuttamaton henkilö poissa akkujen lähettyviltä.
• Älä heitä paristoja tuleen. Akut voivat räjähtää.
• Älä avaa tai vahingoita paristoja. Vapautunut elektrolyytti on haitallista iholle ja silmille. Se voi olla myrkyllistä.
• Replace batteries only with the same type and number of batteries or battery packs recommended by the manufacturer.
• Do not connect the UPS to a non-grounded outlet.
• Varmista kaikkien kytkettyjen laitteiden asianmukainen maadoitus.
• Always disconnect the UPS from the power source before performing any maintenance or service.

3. Asennus

3.1 Pakkauksesta purkaminen ja tarkastus

Carefully unpack the UPS and its components. Inspect for any shipping damage. If damage is found, notify the carrier and dealer. The package should contain the UPS unit, rack-mounting hardware, and documentation.

3.2 Telineasennus

The SRT 10KVA RM is designed for installation in a standard 19-inch equipment rack. Follow the instructions provided with the rack-mounting kit to securely install the UPS and the step-down transformer module into the rack. Ensure adequate ventilation space around the unit.

Kuva 1: Edessä view of the APC Smart-UPS SRT 10KVA Rack Mount UPS system, showing the main UPS unit and associated battery packs/step-down transformer modules installed in a rack. The central unit features a display panel indicating 'Output 208.0 V' and 'Online'.

3.3 Sähköliitännät

1. Syöttöteho: Connect the UPS input power cord to a dedicated 208V or 240V AC circuit. Ensure the circuit breaker rating is appropriate for the UPS capacity.
2. Step-Down Transformer Connection: Connect the output of the main UPS unit to the input of the step-down transformer module using the provided cables.
3. Output Power (120V): Connect your critical equipment to the 120V output receptacles on the step-down transformer module. Do not overload the outlets.
4. Network Management Card (Optional): If applicable, install and configure the network management card for remote monitoring and control.

3.4 Ensimmäinen käynnistys

After all connections are secure, press the power button on the front panel of the UPS. The UPS will perform a self-test and then enter online mode. Verify the output voltage and status on the front panel display.

4. Käyttö

4.1 Etupaneelin näyttö

The front panel LCD provides real-time information about the UPS status, input/output voltage, battery charge, load level, and various alarms. Use the navigation buttons (ESC, OK, UP, DOWN) to access different menus and settings.

4.2 Peruskäyttö

• Kytkeminen päälle: Paina virtapainiketta ja pidä sitä painettuna, kunnes näyttö syttyy.
• Sammutus: Press and hold the power button until the UPS shuts down. Ensure all connected equipment is safely powered off first.
• Itsetestaus: Initiate a self-test from the front panel menu to verify battery and UPS functionality.

4.3 Akun hallinta

The UPS continuously monitors battery health. The display will indicate battery charge level and estimated runtime. Perform periodic battery self-tests as recommended to ensure optimal performance.

5. Huolto

5.1 Pariston vaihto

The UPS batteries are user-replaceable. Refer to the specific battery replacement instructions provided with your replacement battery modules. Always use genuine APC replacement battery cartridges (RBCs) to ensure compatibility and safety. Battery replacement should only be performed by qualified personnel.

5.2 Puhdistus

Keep the UPS and its ventilation openings clean and free of dust. Use a dry cloth to wipe down the exterior. Do not use liquid cleaners or solvents.

5.3 Ympäristönäkökohdat

Operate the UPS within the specified temperature and humidity ranges. Avoid exposing the unit to direct sunlight, excessive heat, or moisture. Ensure proper airflow around the unit to prevent overheating.

6. Vianmääritys

This section provides solutions to common issues. For more complex problems, contact APC technical support.

7. Tekniset tiedot

8. Takuu ja tuki

APC provides a limited warranty for this product. For detailed warranty information, please refer to the warranty card included with your product or visit the official APC website. Technical support is available to assist with installation, troubleshooting, and product inquiries. Please have your model number and serial number ready when contacting support.

Lisäapua varten käy osoitteessa APC-kauppa Amazonissa tai virallinen APC websivusto.