1. Johdanto
This manual provides essential instructions for the installation, operation, and maintenance of your APC Back-UPS BX600C-IN. This Uninterruptible Power Supply (UPS) system is designed to provide power backup and surge protection for home office equipment, desktop PCs, and other home electronics, ensuring continuous operation during power outages and protecting against voltage vaihtelut.
2. Tärkeitä turvallisuustietoja
Please read and understand these instructions carefully before installing or operating the UPS. Failure to follow these instructions can result in serious injury or equipment damage.
⚠ VAROITUS: SÄHKÖISKUN VAARA
- Do not remove the cover. Hazardous live parts inside this UPS are present even when the unit is disconnected from the mains.
- Anna huolto vain pätevän henkilöstön tehtäväksi.
- Varmista sähköpistorasian asianmukainen maadoitus.
- Do not connect non-computer related items like hair dryers, vacuum cleaners, or other high-power appliances to the battery backup outlets.
Always disconnect the UPS from the power source before performing any maintenance or service.
3. Pakkauksen sisältö
The APC Back-UPS BX600C-IN package should contain the following items:
- APC Back-UPS BX600C-IN Unit
- Käyttöopas (tämä asiakirja)
Inspect the package upon receipt. Notify the carrier and dealer if there is any damage.
4. Tuote ohiview
4.1. Tärkeimmät ominaisuudet
- Kompakti muotoilu: Line Interactive UPS with a load capacity of 360 Watts / 600VA.
- Battery Backup & Surge Protection: Three 6A, 2/3 Pin output Indian Power Sockets provide battery backup and surge protection.
- Automaattinen Voltage Asetus (AVR): Corrects incoming voltage fluctuations within a wide range of 145-290V.
- Akku: Equipped with a 1x7.2Ah battery, offering 20-75 minutes of backup time depending on the load.
- Generaattori yhteensopiva: Designed to work with generators.
- Low Power Load Compatibility: Suitable for devices like Wi-Fi routers and DSL modems.
- Cold Start Capability: Allows the UPS to power on using only battery power.
- Pikalataus: Recharges the battery in 4-6 hours.
- Hiljainen toiminta: Maintains quiet operation during transfer from mains to generator power.
4.2. Etupaneeli
Kuva 1: Edessä view of the APC Back-UPS BX600C-IN. This image displays the power button, battery indicator, and surge protection indicator on the front panel.
- Virtapainike: Ohjaa UPS-virran kytkentää/katkaisua.
- Pariston ilmaisin: Shows battery status (charging, on battery, low battery).
- Ylijännitesuojan ilmaisin: Palaa, kun ylijännitesuoja on aktiivinen.
4.3. Takapaneeli
Kuva 2: Takaosa view of the APC Back-UPS BX600C-IN. This image shows the three battery backup and surge protected outlets, the input power cord, and ventilation grilles.
- Akkuvarmistus ja ylijännitesuojatut pistorasiat: Three 6A, 2/3 Pin Indian standard outlets for connecting critical equipment. These outlets provide power during outagja suojaavat ylijännitteiltä.
- Tulovirtajohto: Liittää UPS-laitteen verkkovirtalähteeseen.
- Ilmanvaihtoritilät: Varmista riittävä ilmanvaihto jäähdytykseen.
5. Asennusohjeet
- Sijoitus: Place the UPS in a cool, dry location, away from direct sunlight, excessive heat, or moisture. Ensure adequate ventilation around the unit.
- Akun ensimmäinen lataus: Connect the UPS to a grounded wall outlet using the attached power cord. Allow the unit to charge for at least 8 hours before connecting any equipment. This ensures optimal battery runtime.
- Kytke laitteet:
- Connect your computer, monitor, and other critical devices (e.g., Wi-Fi router, modem) to the Akkuvarmistus- ja ylijännitesuojatut pistorasiat on the rear of the UPS.
- Do not overload the UPS. The total wattage of connected equipment should not exceed 360 Watts.
- Virta päälle: Press the power button on the front panel to turn on the UPS. The power indicator will illuminate.
Varmista, että kaikki liitännät ovat kunnossa ennen laitteiden käynnistämistä.
6. Käyttöohjeet
6.1. Turning the UPS On/Off
- Käynnistää: Press and hold the power button on the front panel until a beep is heard. The power indicator will light up.
- Sammuttaa: Press and hold the power button until a beep is heard and the power indicator turns off.
6.2. Understanding Indicators and Alarms
| Merkkivalo/hälytys | Kuvaus |
|---|---|
| Power Indicator (Green LED) On | UPS is providing power to connected equipment. |
| Power Indicator (Green LED) Flashing | UPS toimii akkuvirralla. |
| Audible Alarm (Beeping) | Indicates the UPS is operating on battery power. Beeps more frequently as battery charge depletes. |
| Continuous Alarm / Red Indicator | Indicates low battery, overload, or a fault condition. |
| Surge Protection Indicator On | Surge protection is active and functioning. |
6.3. Automaattinen Voltage Asetus (AVR)
UPS korjaa automaattisesti pienetkin äänenvoimakkuudettage fluctuations (sags and surges) without switching to battery power, extending battery life. If the voltage fluctuation is too severe or prolonged, the UPS will switch to battery power.
6.4. Cold Start Function
The cold start feature allows you to power on the UPS and connected equipment using only battery power, even if there is no utility power available. To perform a cold start, ensure the UPS is off, then press and hold the power button until the unit powers on.
7. Huolto
7.1. Akun hoito ja vaihto
The UPS contains a sealed, maintenance-free lead-acid battery. The battery is designed for a service life of 3-5 years under normal operating conditions. Factors like frequent power outages, high temperatures, and deep discharges can reduce battery life.
- Akun tyyppi: The UPS uses one 12V battery.
- Korvaus: Battery replacement should only be performed by qualified service personnel. Refer to the safety information before attempting any service.
- Hävittäminen: Batteries must be recycled properly. Contact your local recycling center or APC for disposal information.
7.2. Puhdistus
Puhdista UPS-laitteen ulkopinta säännöllisesti pehmeällä, kuivalla liinalla. Älä käytä nestemäisiä tai aerosolipuhdistusaineita. Varmista, että tuuletusaukot ovat puhtaita pölystä ja roskista.
8. Vianmääritys
This section provides solutions to common issues you might encounter with your UPS. If the problem persists, contact APC customer support.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| UPS ei käynnisty. |
|
|
| UPS beeps frequently or continuously. |
|
|
| Lyhyt varmuuskopiointiaika. |
|
|
| UPS makes chattering noises. |
|
|
9. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Malli | BX600C-IN |
| Kapasiteetti | 600 VA / 360 W |
| Tulo Voltage Alue | 145-290V AC |
| Lähtö Voltage | 230V AC |
| Lähtötaajuus | 47 - 63 Hz (Sync to mains) |
| Siirtoaika | Tyypillinen 10 ms, enintään 12 ms |
| Akun tyyppi | 1 x 12V, 7.2Ah Sealed Lead-Acid |
| Tyypillinen latausaika | 4-6 tuntia |
| Backup Time (Typical) | 20 - 75 minutes (load dependent) |
| Pistorasiat | 3 x 6A, 2/3 Pin Indian Sockets (Battery Backup & Surge Protected) |
| Mitat (K x L x S) | 23.7 x 10.7 x 21.8 cm |
| Paino | 4.69 kg |
| Käyttölämpötila | 0 °C - 40 °C (32 °F - 104 °F) |
10. Takuu ja tuki
APC provides a comprehensive warranty for this product.
- Takuuaika: The APC Back-UPS BX600C-IN comes with a 2 vuoden takuu covering parts and labor, including the battery.
- Ota yhteyttä tukeen: For technical assistance, warranty claims, or service inquiries, please contact APC customer support. Refer to the official APC webKatso alueesi ajantasaisimmat yhteystiedot verkkosivustolta tai ostodokumentaatiosta.
- Valmistaja: SCHNEIDER ELECTRIC IT BUSINESS INDIA PRIVATE LIMITED.
Säilytä ostokuittisi takuun voimassaoloa varten.
