Lexar JumpDrive S75 256GB USB 3.1 Flash Drive

Johdanto

The Lexar JumpDrive S75 is a high-performance USB 3.1 flash drive designed for efficient storage and transfer of photos, videos, and files. It offers fast read and write speeds, making it suitable for various data management tasks. The drive features a retractable connector for protection and is compatible with both PC and Mac systems.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Lexar JumpDrive S75.

Tuote loppuview

This image shows the Lexar JumpDrive S75 USB 3.1 Flash Drive, highlighting its compact design and retractable connector. The drive is being held in a hand, positioned near a laptop and a notebook, illustrating its portability and ease of use in a typical work or study environment.

The Lexar JumpDrive S75 features a sleek design with a retractable USB connector, which protects the connector when not in use. It is equipped with SuperSpeed USB 3.1 technology for rapid data transfer.

• SuperSpeed USB 3.1 Technology: Enables fast content transfer with speeds up to 150MB/s read and 60MB/s write for 64GB-256GB capacities.
• Sisäänvedettävä liitin: A convenient thumb slide mechanism extends and retracts the USB connector.
• Laaja yhteensopivuus: Works with both PC and Mac operating systems.
• LED-aktiivisuuden ilmaisin: A small light indicates when the drive is actively reading or writing data.

Asennus

The Lexar JumpDrive S75 is a plug-and-play device, requiring no special driver installation for most modern operating systems.

1. Extend the Connector: Use the thumb slide to extend the USB connector from the drive casing.
2. Yhdistä tietokoneeseen: Insert the USB connector into an available USB port on your computer. For optimal performance, use a USB 3.0 or USB 3.1 port. The drive is also backward compatible with USB 2.0 ports, though speeds will be limited to USB 2.0 specifications.
3. Tunnustus: Your computer's operating system should automatically detect the drive and make it accessible. It will typically appear as a removable disk drive in 'My Computer' (Windows) or on the desktop/Finder (Mac).

Käyttöohjeet

Siirretään Files

1. Avaa asema: Double-click the drive icon on your computer to open its contents.
2. Kopioida Files: Vedä ja pudota files or folders from your computer to the JumpDrive S75, or vice versa. Alternatively, use the copy and paste functions.
3. Monitor Transfer: Observe the LED activity indicator on the drive. A flashing light indicates that data is being read from or written to the drive.

Turvallinen poisto

To prevent data corruption, always safely eject the flash drive before physically removing it from your computer.

• Windows: Click the 'Safely Remove Hardware and Eject Media' icon in the system tray, then select the Lexar JumpDrive S75. Wait for the 'Safe to Remove Hardware' message before unplugging.
• Mac: Drag the drive icon to the Trash, or right-click (Control-click) the drive icon and select 'Eject'. Wait for the icon to disappear before unplugging.

Huolto

• Protect the Connector: Always retract the USB connector into the drive casing when not in use to prevent damage to the connector pins.
• Käsittele varovasti: Avoid dropping the drive or subjecting it to excessive force, as this can cause internal damage.
• Pidä kuivana: Protect the drive from moisture and extreme temperatures.
• Säännölliset varmuuskopiot: While flash drives are reliable, it is good practice to back up important data to multiple locations to prevent data loss.

Vianetsintä

Asemaa ei havaittu

• Varmista, että asema on työnnetty kokonaan USB-porttiin.
• Kokeile toista tietokoneesi USB-porttia.
• Test the drive on another computer to determine if the issue is with the drive or the computer's USB port.
• Käynnistä tietokone uudelleen.

Hitaat siirtonopeudet

• Verify that you are connected to a USB 3.0 or USB 3.1 port. USB 2.0 ports will operate at significantly lower speeds.
• Monien pienten siirto filevoi olla hitaampaa kuin yhden suuren siirtäminen file samankokoinen.
• Varmista, että tietokoneesi ajurit ovat ajan tasalla.

Data Corruption or Inaccessible Files

• Always safely eject the drive before removal. Unexpected removal can lead to data corruption.
• If files become inaccessible, you may consider using data recovery software (third-party) or reformatting the drive if data is not critical. Reformatting will erase all data.

Reported Capacity Discrepancy

• The actual usable storage capacity may be less than the stated capacity due to formatting, operating system files, and other functions. This is normal for all storage devices.

Tekniset tiedot

Takuutiedot

For detailed warranty information regarding your Lexar JumpDrive S75, please refer to the official Lexar website or the warranty card included with your product at the time of purchase. Warranty terms and conditions may vary by region and product.

Tukea

If you encounter any issues or have questions not covered in this manual, please visit the official Lexar support websivustolta lisäapua, usein kysyttyjä kysymyksiä ja yhteydenottovaihtoehtoja.

Lexar Official Websivusto: www.lexar.com