Defiant 270 asteen mustan vaihtoliiketunnistimen käyttöohje ulkokäyttöön

1. Tuote ohiview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. Turvallisuustiedot

Lue ja ymmärrä kaikki ohjeet ennen tuotteen asentamista tai käyttöä. Näiden ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon tai muita vaaroja, jotka voivat aiheuttaa omaisuusvahinkoja tai henkilövahinkoja.

• VAROITUS: Sähköiskun vaara. Katkaise virta sulaketaulusta tai sulakekaapista ennen asennusta tai huoltoa.
• Varmista, että kaikki sähköliitännät on tehty paikallisten määräysten ja määräysten mukaisesti.
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• Pidä pakkausmateriaalit poissa lasten ulottuvilta.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• Käyttöohje (tämä asiakirja)

4. Tekniset tiedot

5. Asennus

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. Sammuta virta: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltage testaaja.
2. Irrota vanha anturi: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. Valmistele uusi anturi: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. Johdinliitännät:
   • Yhdistä musta johto anturista kohti musta (kuuma) lanka virtalähteestä.
   • Yhdistä punainen lanka anturista kohti black (load) wire valaisimesta.
   • Yhdistä valkoinen lanka anturista kohti valkoinen (nolla)johdin from the power supply and the light fixture.
   • Yhdistä maadoitusjohto (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   Kiinnitä kaikki liitännät vaijerimuttereilla ja sähköteipillä.

5. Kiinnitysanturi: Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. Tiivisteliitännät: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. Palauta virta: Kytke virta takaisin päälle sulakkeesta.

6. Asennus ja säätö

After installation, adjust the sensor's settings for optimal performance.

• Testitila: Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• Herkkyyden säätö: Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• Ajan säätö: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. Käyttöohjeet

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8. Huolto

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• Puhdistus: Pyyhi anturin linssi säännöllisesti pehmeällä,amp cloth to remove dust, dirt, or debris that may obstruct its view. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Tarkastus: Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• Esteet: Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view or cause false triggers.

9. Vianmääritys

If your motion sensor is not functioning as expected, try the following steps:

10. Takuu ja tuki

This Defiant motion sensor comes with a 1 vuoden rajoitettu takuu ostopäivästä alkaen. Tämä takuu kattaa materiaali- ja valmistusvirheet normaalikäytössä.

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant websivusto.