MT8100iE Weintek 10.2" Graphic HMI User Manual

1. Johdanto

The Weintek MT8100iE is a 10.2-inch Human Machine Interface (HMI) designed for industrial automation applications. It features an 800 x 480 TFT industrial-grade LCD and is built to fully support major PLCs such as Rockwell, Siemens, Mitsubishi, and Omron. This manual provides essential information for the proper installation, operation, and maintenance of your MT8100iE HMI.

2. Turvallisuustiedot

Please read and understand all safety instructions before operating the device. Failure to comply may result in injury or damage to the equipment.

• Varmista, että virtalähde on irrotettu ennen asennus- tai huoltotöitä.
• Vain pätevä henkilöstö saa asentaa ja huoltaa tätä laitetta.
• Älä altista laitetta liialliselle kosteudelle, pölylle tai äärimmäisille lämpötiloille.
• Verify correct wiring and connections to prevent electrical hazards.
• The front panel is NEMA4/IP65 compliant, but ensure proper sealing during installation to maintain this rating.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• MT8100iE HMI Unit
• Mounting Brackets (4x)
• Virtaliitin
• Käyttöopas (tämä asiakirja)
• CD-ROM with EasyBuilder Pro Software (or download link)

4. Tuote ohiview

Familiarize yourself with the components and interfaces of the MT8100iE HMI.

4.1 Edessä View

Kuva 4.1: Etuosa view of the MT8100iE HMI, showing the 10.2-inch TFT LCD touchscreen and the power indicator LED at the top left.

4.2 Sivu View

Kuva 4.2: Sivuprofiilifile of the MT8100iE, illustrating its compact form factor suitable for panel mounting.

4.3 Taka View

Kuva 4.3: Takaosa view of the MT8100iE, highlighting the mounting holes for panel installation, the fuse holder for power protection, and the system reset button.

4.4 Tietoliikenneportit

Kuva 4.4: Pohja view of the MT8100iE, detailing the various communication ports including USB, Ethernet, COM1 (RS-232), and COM2 (RS-485 2W/4W).

5. Asennus

5.1 Paneeliasennus

1. Cut an opening in the control panel according to the dimensions provided in the installation guide (refer to the separate installation template for precise measurements).
2. Insert the MT8100iE HMI into the cutout from the front.
3. From the rear of the panel, insert the four mounting brackets into the slots on the HMI unit.
4. Tighten the screws on the mounting brackets evenly until the HMI is securely fastened to the panel. Do not overtighten.

5.2 Virtaliitäntä

• Connect a 24V DC power supply to the power input terminal block on the rear of the HMI.
• Varmista oikea napaisuus (+ ja -).
• Secure the connection firmly.

5.3 Tietoliikenneyhteydet

• Sarjaportit: Use the COM1 (RS-232) and COM2 (RS-485 2W/4W) ports to connect to PLCs or other serial devices. Refer to your PLC's documentation for specific wiring diagrams.
• Ethernet-portti: Connect an Ethernet cable to the RJ45 port for network communication with PLCs or for remote access.
• USB-portit: Use the USB host ports for connecting USB flash drives for project transfers or other peripherals.

6. Käyttöohjeet

6.1 Virran kytkeminen päälle

Once all connections are secure, apply power to the HMI. The power indicator LED will illuminate, and the HMI will boot up, displaying the configured project.

6.2 Project Download

To load a new project or update an existing one:

1. Create or modify your HMI project using the EasyBuilder Pro software on a PC.
2. Connect the PC to the HMI via Ethernet or USB.
3. In EasyBuilder Pro, use the 'Download' function to transfer the project to the HMI.
4. The HMI will restart with the new project loaded.

6.3 Kosketusnäytön käyttö

The MT8100iE features a resistive touchscreen. Use your finger or a non-sharp stylus to interact with the on-screen elements such as buttons, input fields, and displays.

6.4 PLC Communication

The HMI is designed to communicate with various PLCs. Ensure the communication settings (protocol, baud rate, station ID, etc.) configured in your EasyBuilder Pro project match those of your connected PLC.

7. Huolto

Regular maintenance ensures optimal performance and longevity of your HMI.

• Puhdistus: Käytä pehmeää, damp liina näytön ja c:n puhdistamiseenasing. Do not use abrasive cleaners or solvents. Ensure no liquid enters the device.
• Laiteohjelmistopäivitykset: Periodically check the Weintek website for firmware updates to ensure your HMI has the latest features and bug fixes.
• Sulakkeen vaihto: If the HMI does not power on, check the fuse located on the rear panel. Replace it with a fuse of the same type and rating if necessary. Always disconnect power before replacing the fuse.
• Ympäristöolosuhteet: Varmista, että käyttöympäristö pysyy määritetyissä lämpötila- ja kosteusrajoissa vaurioiden välttämiseksi.

8. Vianmääritys

Tässä osiossa on ratkaisuja yleisiin ongelmiin, joita saatat kohdata.

9. Tekniset tiedot

10. Takuu ja tuki

Weintek products are manufactured to high quality standards. For warranty information and technical support, please refer to the official Weintek websivustolta tai ota yhteyttä valtuutettuun jälleenmyyjään. Säilytä ostokuitti ostotodistuksena takuuvaatimuksia varten.

For software downloads, drivers, and additional resources, visit the official Weintek support portal.