Amazon Basics Dual Monitor Stand (K001395) Instruction Manual

Johdanto

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Amazon Basics Dual Monitor Stand. This dual-arm monitor stand is designed to free up desktop space and offer ergonomic positioning for two LCD monitors, each weighing up to 20 pounds.

Image: The Amazon Basics Dual Monitor Stand, illustrating its dual-arm design, adjustable features, and desk clamp mekanismi.

Turvallisuustiedot

Lue ja ymmärrä kaikki ohjeet ennen kokoamista ja käyttöä. Näiden ohjeiden noudattamatta jättäminen voi aiheuttaa omaisuusvahinkoja tai henkilövahinkoja.

• Ensure your desk surface is sturdy enough to support the weight of the monitor stand and two monitors.
• Do not exceed the maximum weight capacity of 20 pounds (9.07 kg) per arm.
• Always use the provided hardware. If any parts are missing or damaged, contact customer support.
• Pidä lapset ja lemmikkieläimet loitolla kokoamisen aikana.
• Kiristä kaikki ruuvit tiukasti, mutta älä kiristä liikaa.

Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen kokoamisen aloittamista:

• Dual-arm monitor stand components
• Työpöytä clamp kokoonpano
• Grommet mount components
• Kiinnitystarvikkeet (ruuvit, aluslevyt)
• Hex keys for adjustments
• Kaapelisiteet

Asennus ja asennus

The monitor stand can be installed using either a desk clamp tai läpivientikiinnike.

1. Työpöytä Clamp Asennus

1. Kiinnitä työpöytä clamp base to the edge of your desk. Ensure the desk thickness is between 0.4 and 2.4 inches (1 cm - 6 cm).
2. Kiristä clamp turvallisesti liikkumisen estämiseksi.

2. Grommet Mount Installation (Optional)

If your desk has a grommet hole, you can use this method for a more permanent installation.

1. Disassemble the desk clamp and reconfigure it for grommet mounting as per the detailed instructions in the included manual.
2. Insert the grommet bolt through the desk hole and secure it from underneath with the provided plate and wing nut.

3. Näyttöjen liittäminen

This stand is VESA compatible (100 x 100mm and 75 x 75mm).

1. Attach the VESA plates to the back of each monitor using the appropriate screws.
2. Slide the monitors (with attached VESA plates) onto the arms of the stand. Ensure they click securely into place.

4. Kaapelien hallinta

Route monitor cables through the integrated cable management channels on the arms and secure them with the provided cable ties. Do not overtighten the ties to avoid damaging cables.

Video: This video demonstrates the installation and usage of the AmazonBasics Dual Side-by-Side Monitor Arm, including how to attach monitors and manage cables.

Käyttö ja säädöt

Näyttöteline tarjoaa useita säätöjä optimaalisen katselukokemuksen saavuttamiseksi. viewmukavuutta.

Image: The dual monitor stand demonstrating its adjustable positioning capabilities, allowing monitors to be moved left, right, up, and down.

1. Korkeuden säätö

Gently lift or lower the monitor arms to your desired height. The gas spring mechanism allows for smooth vertical movement.

2. Kallistuksen säätö

Monitors can be tilted 70 degrees backward and 5 degrees forward for an ergonomic reading angle. Loosen the tilt screw, adjust the angle, and then re-tighten.

3. Kierto

Each monitor can be independently rotated 360 degrees, allowing for easy transitions between landscape and portrait modes.

4. Tension Adjustments

If the monitor arms are too stiff or too loose and do not hold their position, you may need to adjust the tension. Use the provided hex key to turn the tension screw. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors).

Video: This video illustrates how to adjust the tension of the monitor arm to ensure it holds the monitor's weight correctly.

Video: This video demonstrates the installation process for a premium single monitor stand, including tension adjustments, which are similar for dual arms.

Huolto

Säännöllinen huolto varmistaa näyttötelineesi pitkän käyttöiän ja optimaalisen suorituskyvyn.

• Tarkista säännöllisesti kaikkien ruuvien ja liitosten tiukka kiinnitys.
• Puhdista jalusta pehmeällä, damp liinalla. Vältä hankaavia puhdistusaineita tai liuottimia.
• Älä voitele kaasujousimekanismia.

Vianetsintä

Monitor Arm Does Not Stay Up or Sags

This is typically due to insufficient tension in the gas spring mechanism for the weight of your monitor. Refer to the "Tension Adjustments" section above. Use the provided hex key to increase the tension by turning the screw clockwise until the arm can hold the monitor in the desired position.

Video: This video shows a user demonstrating an issue with the monitor arm not staying up and suggests a fix, which involves adjusting the tension.

Tekniset tiedot

• Mallinumero: K001395
• Merkki: Amazonin perusteet
• Materiaali: Alumiini
• Väri: Musta
• Tuotteen paino: 13.5 puntaa (6.12 kg)
• Tuotteen mitat (PxLxK): 25.6 x 6.9 x 16.2 tuumaa (65.02 x 17.53 x 41.15 cm)
• Maximum Monitor Weight (per arm): 20 puntaa (9.07 kg)
• VESA-yhteensopivuus: 100 x 100mm and 75 x 75mm
• Työpöytä Clamp Paksuus: 0.4–2.4 tuumaa (1–6 cm)
• Liikkeen tyyppi: Tilt, Swivel, Rotation, Height Adjustment
• Suurin kallistuskulma: 70 Degrees (back), 5 Degrees (forward)

Image: Detailed dimensions of the Amazon Basics Dual Monitor Stand.

Takuu ja tuki

For warranty information or customer support, please refer to the documentation included with your product or visit the official Amazon Basics support page. Keep your purchase receipt for warranty claims.