Johdanto
This instruction manual provides essential information for the proper installation, operation, and maintenance of your Geberit 154.336.FW.1 Wall Mounted Siphon Cover. Please read this manual thoroughly before beginning installation or use to ensure safe and efficient operation. Retain this manual for future reference.
Turvallisuustiedot
Observe the following safety guidelines to prevent injury and damage to the product:
- Käytä aina asianmukaisia henkilönsuojaimia asennuksen aikana, kuten käsineitä ja silmäsuojaimia.
- Ensure all water supply lines are shut off before commencing installation.
- Jos olet epävarma jostakin asennusprosessin osasta, ota yhteyttä pätevään ammattilaiseen.
- Älä muuta tuotetta millään tavalla, sillä se voi mitätöidä takuun ja vaarantaa turvallisuuden.
- Pidä pienet osat poissa lasten ulottuvilta tukehtumisvaaran välttämiseksi.
Pakkauksen sisältö
Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:
- Geberit 154.336.FW.1 Wall Mounted Siphon Cover (Brushed Stainless Steel)
- Mounting hardware (if applicable, refer to included components list)
- Käyttöohje
Asennus ja asennus
The Geberit 154.336.FW.1 siphon cover is designed for integration with a Geberit shower wall gutter system. Proper installation ensures optimal function and aesthetic appeal.

This diagram illustrates the key dimensions of the Geberit wall mounted siphon cover. The cover measures 32 units in length and 5 units in width, providing essential measurements for installation planning.
Asennusvaiheet:
- Prepare the Shower Wall Gutter: Ensure the Geberit shower wall gutter system is correctly installed and sealed according to its specific instructions.
- Position the Siphon Cover: Carefully align the stainless steel siphon cover with the opening of the shower wall gutter. The 'Right-sided' design indicates its intended orientation.
- Kiinnitä kansi: If specific mounting hardware is provided, use it to secure the cover firmly in place. The cover is designed to sit flush with the surrounding surface.
- Tarkista oikea istuvuus: Ensure the cover is stable and does not wobble. It should provide a seamless finish to the shower area.
- Testiviemäröinti: After installation, test the shower drainage to confirm proper water flow and ensure no obstructions are present.
Toiminta
The Geberit 154.336.FW.1 Wall Mounted Siphon Cover functions as a decorative and protective element for your shower wall gutter. Once installed, it requires no active operation. Its primary purpose is to cover the siphon mechanism, providing a finished aesthetic while allowing water to drain efficiently into the gutter system.
Huolto ja hoito
To maintain the appearance and functionality of your stainless steel siphon cover, follow these care instructions:
- Säännöllinen puhdistus: Clean the stainless steel surface regularly with a soft cloth and a mild, non-abrasive cleaner.
- Vältä kovia kemikaaleja: Do not use abrasive cleaners, scouring pads, or strong chemical agents, as these can scratch or damage the stainless steel finish.
- Huuhtele huolellisesti: After cleaning, rinse the cover thoroughly with clean water and dry it with a soft cloth to prevent water spots.
- Tarkista roskien varalta: Periodically remove the cover (if designed for easy removal) to inspect and clean any debris from the underlying shower gutter and siphon.
Vianetsintä
If you encounter issues with your siphon cover, refer to the following table:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Cover does not sit flush. | Väärä asennus tai tukos. | Re-check alignment and ensure no debris is preventing a flush fit. Verify the underlying gutter is correctly installed. |
| Vesi valuu hitaasti. | Obstruction in the shower gutter or siphon. | Remove the cover and clean the shower gutter and siphon thoroughly. |
| Cover appears scratched or dull. | Abrasive cleaning agents or materials used. | Use only soft cloths and mild, non-abrasive cleaners for stainless steel. |
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallinumero | 154.336.FW.1 |
| Materiaali | Ruostumaton teräs |
| Väri | Stainlesssteel (Brushed) |
| Tyyli | Right-sided |
| Tuotteen mitat | 11.81 x 7.87 x 15.75 tuumaa (pakkaus) |
| Tuotteen paino | 14.8 unssia |
| Valmistaja | GEBERIT |
Takuutiedot
Geberit products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your region and product, please refer to the official Geberit websivustolta tai ota yhteyttä asiakastukeen. Säilytä ostokuitti takuuvaatimuksia varten.
Asiakastuki
If you have any questions, require technical assistance, or need to report an issue with your Geberit product, please visit the official Geberit website for contact information or consult your local distributor. When contacting support, please have your product model number (154.336.FW.1) and purchase details readily available.





