1. Johdanto
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinbach 040955 CPS 40-2 Filtration Pump. Please read these instructions carefully before using the pump to ensure proper function and longevity of the product. This pump is designed for filtering pool water up to approximately 19,000 liters capacity and is compatible with Steinbach Classic 300, Classic 250, and ActiveBalls+ filtration systems.
2. Turvallisuusohjeet
Noudata aina seuraavia turvaohjeita välttääksesi loukkaantumiset tai pumpun vaurioitumisen.
- Sähköturvallisuus: Ensure the power supply matches the pump's specifications (240 Volts). Always disconnect the pump from the power supply before performing any maintenance or cleaning. Do not operate the pump with a damaged power cord or plug.
- Vesiturvallisuus: Never operate the pump dry. Ensure the pump is fully primed with water before starting. Keep children and pets away from the pump during operation.
- Sijoitus: Install the pump on a stable, level surface. Ensure adequate ventilation around the pump to prevent overheating.
- Lämpötila: The pump is designed for water temperatures up to 35 degrees Celsius.
3. Tuote ohiview
The Steinbach 040955 CPS 40-2 is a robust filtration pump designed for efficient pool water circulation. It features a durable plastic housing and an electric cable power source. The pump is compact and operates quietly.
Kuva 3.1: Etuosa view of the Steinbach 040955 CPS 40-2 Filtration Pump.
Kuva 3.2: Sivu view of the pump, showing the inlet and outlet connections.
Figure 3.3: Visual representation of the pump's dimensions, approximately 20 cm (8.2 inches) in height.
Figure 3.4: Product packaging displaying key specifications such as 230V/200W power, 6.5m max head, and 6000 l/h flow rate.
4. Asennus
Follow these steps for proper installation of your filtration pump:
- Purkaminen: Poista kaikki osat varovasti pakkauksesta. Tarkista mahdollisten vaurioiden varalta.
- Sijoitus: Position the pump on a firm, level surface near your pool, ensuring it is protected from direct weather exposure and has adequate air circulation.
- Letkuliitännät: Connect the appropriate hoses (32mm or 38mm diameter) to the pump's inlet and outlet ports. Ensure all connections are secure and watertight to prevent leaks.
- Pohjustus: Before starting, ensure the pump is fully primed with water. This typically involves filling the pump housing with water until it overflows from the suction port.
- Sähköliitäntä: Connect the pump to a grounded electrical outlet (240V). Ensure the circuit is protected by a Residual Current Device (RCD) for safety.
5. Käyttö
Once the pump is set up and primed, you can begin operation:
- Pumpun käynnistäminen: Turn on the power supply to the pump. The pump should start circulating water immediately.
- Valvonta: Observe the water flow and pressure. The pump operates quietly, indicating efficient performance.
- Ajoaika: The optimal run time for your pump depends on your pool size and usage. Consult your pool system's guidelines for recommended daily filtration cycles.
- Sammutetaan: To turn off the pump, simply disconnect it from the power supply.
6. Huolto
Regular maintenance ensures the longevity and efficiency of your filtration pump:
- Puhdistus: Periodically clean the pump's exterior with a damp kangas. Älä käytä vahvoja kemikaaleja.
- Filter System Maintenance: This pump works in conjunction with a filtration system. Regularly clean or replace the filter cartridges or media as recommended by your filter system's manual.
- Talvistaminen: If you live in an area with freezing temperatures, disconnect the pump and drain all water from it before winter. Store the pump in a dry, frost-free location.
- Letkun tarkastus: Regularly check hoses and connections for wear, cracks, or leaks. Replace damaged components as needed.
7. Vianmääritys
Jos pumpussasi on ongelmia, katso seuraavat yleiset ongelmat ja ratkaisut:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Pumppu ei käynnisty | Ei virtalähdettä Moottorin ylikuumeneminen Juoksupyörä jumissa | Tarkista virtaliitäntä ja sulake Anna pumpun jäähtyä Disconnect power and inspect/clear impeller |
| Alhainen veden virtaus | Pumppua ei ole täytetty Tukkeutunut suodatin Ilmavuoto imuputkessa | Esitäytä pumppu uudelleen Puhdista tai vaihda suodatin Check all suction line connections for tightness |
| Pumppu on meluisa | Ilmaa järjestelmässä Roskat juoksupyörässä Pumppu käy kuivana | Poista ilma järjestelmästä Disconnect power and clear debris Ensure pump is primed and has continuous water supply |
8. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Valmistaja | Steinbach |
| Mallinumero | 040955 |
| Tuotteen mitat (P x L x K) | 22.5 x 15.5 x 33.5 cm (8.86 x 6.1 x 13.19 tuumaa) |
| Paino | 4 kg (8.82 lbs) |
| Virtausnopeus | 6000 l/h (75 Liters per minute) |
| Pään enimmäiskorkeus | 6.5 metriä |
| Voitage | 240 volttia |
| Virrankulutus | 200 wattia |
| Materiaali | Muovi |
| Väri | Musta, hopea |
| Letkuliitännän halkaisija | 32mm / 38mm |
| Max. Veden lämpötila | 35 ℃ |
| Sertifiointi | Sertifioitu turhautumatta |
| Kansainvälinen artikkelikoodi | 9008748409551 |
9. Takuu ja tuki
Specific warranty information for the Steinbach 040955 CPS 40-2 Filtration Pump is not explicitly provided in the product data. For any product-related inquiries, technical support, or warranty claims, please contact Steinbach customer service directly or refer to the official Steinbach websivustolta yksityiskohtaisia tukitietoja.
Säilytä ostokuittisi takuuseen liittyviä kysymyksiä varten.
