OSRAM Sylvania CF26DD/835/ECO 26W CFL Bulb Instruction Manual

1. Tärkeitä turvallisuustietoja

Please read all instructions carefully before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• VAROITUS: Always turn off power at the circuit breaker or fuse box before installation, removal, or inspection.
• Tämä lamp on suunniteltu käytettäväksi magnetic ballasts only. Do not use with electronic ballasts or dimmers unless specifically rated for such use.
• Do not use in totally enclosed luminaires unless the luminaire is specifically designed for CFLs.
• Avoid touching the glass portion of the bulb with bare hands. Use a clean cloth or gloves.
• Hävitä lamps according to local regulations, as they contain small amounts of mercury.

2. Asennus ja asennus

This OSRAM Sylvania CF26DD/835/ECO lamp is a 26-watt compact fluorescent lamp with a G24d-3 bi-pin base, designed for specific fixtures.

1. Tarkista yhteensopivuus: Ensure your fixture is designed for a 26W CFL with a G24d-3 base and uses a magnetic ballast.
2. Virta pois: Ennen aloittamista varmista, että valaisimen virransyöttö on kokonaan katkaistu sulakkeesta tai seinäkytkimestä.
3. Poista vanha Lamp (jos sovellettavissa): Jos vaihdat olemassa olevan lamp, gently twist and pull the old lamp straight out from its base.
4. Lisää uusi Lamp: Align the two pins of the CF26DD/835/ECO lamp with the slots in the G24d-3 lamppidikettä. Paina varovasti l-painiketta.amp straight into the base until it is firmly seated. Do not force the lamp.
5. Turvallinen asennus: Varmista, että lamp is securely in place and makes proper electrical contact.

Image: The OSRAM Sylvania CF26DD/835/ECO 26W CFL bulb, showing its double-tube design and G24d-3 bi-pin base. This image illustrates the lamp's physical appearance for correct identification and installation.

3. Käyttöohjeet

Kerran lamp is correctly installed and the power is restored, operation is straightforward.

• Virta päälle: Turn on the power supply to the fixture at the wall switch or circuit breaker.
• Lämpenemisaika: Kompakti fluoresoiva lamps may require a short warm-up period (typically 30-60 seconds) to reach full brightness and color stability. This is normal operation.
• Usein vaihdettavissa: Frequent switching (turning on and off rapidly) can reduce the lifespan of CFLs. It is recommended to leave the lamp on for longer periods when in use.

4. Huolto

The OSRAM Sylvania CF26DD/835/ECO lamp vaatii minimaalista huoltoa.

• Puhdistus: Puhdistaaksesi lamp, ensure the power is off and the lamp is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
• Korvaus: Vaihda lamp when it reaches the end of its rated life (indicated by flickering, dimming, or failure to ignite). Follow the installation steps in Section 2 for replacement.

5. Vianmääritys

Jos sinun lamp ei toimi odotetulla tavalla, katso seuraavat yleiset ongelmat ja ratkaisut:

Jos vianmääritysohjeet eivät ratkaise ongelmaa, ota yhteyttä asiakastukeen.

6. Tekniset tiedot

Detailed technical specifications for the OSRAM Sylvania CF26DD/835/ECO lamp:

• Mallinumero: CF26DD/835/ECO (21114-LX)
• Wattage: 26 wattia
• Valovirta: 1710 lumenia
• Värilämpötila: 3500 Kelvin (K)
• Värintoistoindeksi (CRI): 82
• Perustyyppi: G24d-3 (2-pin)
• Muoto: Double Tube
• Arvioitu elinikä: 10,000 tuntia
• Maximum Overall Length (MOL): 6.8 tuumaa
• Polttimotyyppi: Kompakti loisteputki Lamp (CFL)
• Liitäntälaitteen yhteensopivuus: Magnetic Ballasts Only

7. Takuu ja tuki

OSRAM products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty statement provided with your purchase or visit the official OSRAM websivusto.

For technical assistance, product inquiries, or warranty claims, please contact OSRAM customer support through their official channels.

• Valmistaja: OSRAM
• Websivusto: www.osram.com (Tarkista alueellinen websivustot)