ULINE H-150 2 tuuman kädessä pidettävä sivulta täytettävä teollisuuskäyttöön tarkoitettu teipinannostelija, käyttöohje

1. Johdanto

This manual provides comprehensive instructions for the ULINE H-150 2-Inch Hand-Held Industrial Side Loading Tape Dispenser. This robust tool is engineered for efficient and reliable application of packaging tape, making it suitable for various packaging and shipping tasks. Please read through these instructions carefully before initial use to ensure proper operation and longevity of your dispenser.

2. Tärkeimmät ominaisuudet

• Tuotetyyppi: Office-tuotteet
• Materiaali: Durable Plastic and Metal construction for extended lifespan.
• Side Loading: Tape is inserted from the side, facilitating easy and quick loading.
• Adjustable Brake: Allows control over tape tension for smooth dispensing.
• Terävä terä: Provides clean and efficient tape cutting.
• Ergonominen kahva: Designed for comfortable grip during prolonged use.

3. Tuote ohiview

Figure 1: ULINE H-150 2-Inch Hand-Held Industrial Side Loading Tape Dispenser. This image displays the dispenser with a roll of tape loaded, highlighting its blue body, cream-colored handle, and clear tape guide.

The ULINE H-150 is a robust and user-friendly tape dispenser designed for industrial and heavy-duty use. Its construction combines durable plastic and metal components, ensuring longevity and consistent performance. The side-loading design simplifies tape roll replacement, while the adjustable tension control allows users to customize the tape flow according to their needs. The ergonomic handle provides a comfortable and secure grip, reducing fatigue during extensive use.

4. Setup and Loading Tape

1. Valmistele teippirulla: Ensure you have a 2-inch wide packaging tape roll.
2. Open the Loading Mechanism: Locate the side-loading mechanism on the dispenser. This typically involves a hinged arm or flap that allows access to the tape spindle.
3. Lataa nauha: Place the tape roll onto the spindle, ensuring the adhesive side of the tape faces downwards (away from the dispenser body) as it unwinds.
4. Pujota teippi: Pull a length of tape forward, threading it between the roller and the metal guide. Ensure the tape passes under the clear plastic guard and over the cutting blade.
5. Secure the Mechanism: Close the hinged arm or flap to secure the tape roll in place.
6. Säädä jännitystä: Use the adjustable brake knob (usually located near the tape spindle) to set the desired tape tension. Turning it tighter will increase resistance, while loosening it will decrease resistance.

5. Operating the Dispenser

1. Initial Tape Placement: Press the adhesive end of the tape onto the surface you wish to seal (e.g., a box flap).
2. Teipin kiinnittäminen: Roll the dispenser along the surface, applying even pressure. The roller will ensure smooth and consistent tape application.
3. Cut the Tape: Once the desired length of tape is applied, tilt the dispenser downwards or to the side, allowing the sharp cutting blade to cleanly sever the tape. Exercise caution when using the blade.
4. Smooth Down: Use the plastic flap or your hand to firmly press down the applied tape, ensuring a secure seal.

6. Huolto

• Puhdistus: Periodically clean the roller and blade area to prevent adhesive buildup, which can affect performance. Use a damp cloth or appropriate adhesive remover if necessary.
• Terän hoito: The cutting blade is designed to remain sharp for extended periods. If the blade becomes dull or damaged, replacement parts may be available from ULINE.
• Kestävyys: The ULINE H-150 is constructed with durable plastic and metal components, designed to withstand frequent use in industrial environments.

7. Vianmääritys

• Tape Not Dispensing Smoothly:
  • Check the adjustable brake: Loosen the tension knob if the tape is too tight.
  • Inspect the roller: Ensure it is clean and free of adhesive residue.
  • Verify tape threading: Make sure the tape is correctly threaded through the dispenser.
• Tape Not Cutting Cleanly:
  • Clean the cutting blade: Remove any tape residue or debris from the blade.
  • Ensure proper cutting angle: Tilt the dispenser firmly to engage the blade fully.
• Tape Sticking to Itself:
  • Adjust tape tension: Increase tension slightly to prevent excess tape from unwinding.
  • Ensure tape is not too thin for the dispenser's optimal performance.

8. Tekniset tiedot

9. Lisäresurssit