1. Tuote ohiview
The Planet IGS-801M is an 8-Port 10/100/1000Base-TX Industrial SNMP Switch designed for robust network connectivity in harsh environments. Featuring an IP30 aluminum case, it supports a wide operating temperature range from -40 to 75 degrees Celsius, making it suitable for industrial applications requiring high reliability and performance.
Kuva 1: Etuosa view of the IGS-801M Industrial SNMP Switch. This image displays the compact, rugged design with eight Gigabit Ethernet ports and status LEDs for power, fault, link, and activity.
2. Tärkeimmät ominaisuudet
- 8-porttinen gigabitin Ethernet: Provides 8 x 10/100/1000Base-TX RJ45 ports for high-speed network connections.
- Teollisuusluokan suunnittelu: IP30 rated aluminum case for protection against dust and harsh conditions.
- Leveä käyttölämpötila: Operates reliably in extreme temperatures from -40°C to 75°C (-40°F to 167°F).
- SNMP Management: Supports Simple Network Management Protocol for remote monitoring and management.
- DIN-Rail and Wall-Mountable: Flexible installation options for various industrial environments.
- Redundantti tehonsyöttö: Features dual DC power inputs for enhanced reliability.
- Korkea suorituskyky: Non-blocking wire-speed forwarding for optimal data throughput.
3. Asennusopas
3.1 Pakkauksen sisältö
Before proceeding with the installation, please verify that your package contains the following items:
- IGS-801M Industrial SNMP Switch
- Pika-asennusopas
- DIN-kiskoasennussarja
- Terminal block connector for power input
3.2 Fyysinen asennus
The IGS-801M can be installed on a standard DIN-rail or mounted on a wall. Ensure the installation location is well-ventilated and within the specified operating temperature range.
- Asennus DIN-kiskoon: Attach the DIN-rail clip to the rear of the switch. Hook the top of the clip onto the DIN-rail and push the bottom until it snaps into place.
- Seinäasennus: Use the provided wall-mount brackets (if applicable) and screws to secure the switch to a flat surface. Ensure adequate clearance for cabling and ventilation.
Kuva 2: Kulmassa view of the IGS-801M, showing the Ethernet ports and the removable terminal block for power input at the top.
3.3 Virtaliitäntä
The IGS-801M supports redundant DC power inputs. Connect your power source(s) to the terminal block connector located on the top of the switch. Ensure correct polarity (V+ to positive, V- to negative, and Ground to ground). The input voltage range is typically 12-48V DC, but refer to the product label for exact specifications.
- Connect the power wires to the appropriate terminals on the removable terminal block.
- Insert the terminal block into the power input slot on the switch.
- Once power is supplied, the P1 and/or P2 LEDs on the front panel should illuminate.
3.4 Verkkoyhteys
Connect your network devices (e.g., computers, servers, other switches) to the RJ45 Ethernet ports on the front panel using standard Cat5e/6 Ethernet cables. The switch supports auto MDI/MDI-X, so straight-through or crossover cables can be used interchangeably.
- Insert one end of the Ethernet cable into an available port on the IGS-801M.
- Connect the other end of the cable to your network device.
- The corresponding LNK/ACT LED for that port will illuminate when a valid link is established and blink to indicate activity.
4. Käyttö
4.1 LED-ilmaisimet
The front panel of the IGS-801M features several LED indicators to provide status information:
- P1 / P2 (Green): Indicates power status for power input 1 and 2. Lit when power is supplied.
- VIKA (Punainen): Indicates a system fault or power failure. Lit when an issue is detected.
- LNK/ACT (Green for each port):
- Tasainen vihreä: Kelvollinen verkkoyhteys on muodostettu.
- Vilkkuva vihreä: Portissa on dataliikennettä.
- 1000 (Green for each port): Indicates Gigabit (1000Mbps) connection speed.
- 100 (Green for each port): Indicates Fast Ethernet (100Mbps) connection speed.
4.2 Verkkoasetukset
The IGS-801M is a managed switch, supporting SNMP for advanced network management. For initial setup and basic configuration, you may need to connect to the switch via its web-based interface or console port (if available). Refer to the full user manual or the Quick Installation Guide for detailed instructions on accessing and configuring the switch's management features, including IP address assignment, VLANs, QoS, and security settings.
By default, the switch may obtain an IP address via DHCP or have a static default IP address. Consult the product documentation for the default IP and login credentials.
5. Huolto
Regular maintenance helps ensure the longevity and optimal performance of your IGS-801M switch.
- Puhdistus: Puhdista kytkimen ulkopinta säännöllisesti pehmeällä, kuivalla liinalla. Älä käytä nestemäisiä tai aerosolipuhdistusaineita. Varmista, että tuuletusaukot ovat puhtaita pölystä ja roskista.
- Laiteohjelmistopäivitykset: Check the Planet Technology webTarkista sivustolta säännöllisesti laiteohjelmistopäivitykset. Laiteohjelmiston pitäminen ajan tasalla voi parantaa suorituskykyä, lisätä uusia ominaisuuksia ja korjata tietoturva-aukkoja.
- Ympäristövalvonta: Varmista, että käyttöympäristö pysyy määritetyissä lämpötila- ja kosteusrajoissa vaurioiden välttämiseksi.
- Kaapelin hallinta: Ensure all network and power cables are securely connected and properly routed to prevent accidental disconnections or damage.
6. Vianmääritys
This section provides solutions to common issues you might encounter with the IGS-801M switch.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| No Power (P1/P2 LEDs off) | No power supply, incorrect wiring, faulty power adapter. | Tarkista virtalähteen liitäntä ja äänenvoimakkuustage. Check terminal block wiring for correct polarity. Test with a known good power adapter. |
| No Link (LNK/ACT LED off) | Incorrect cable, faulty cable, device not powered on, port disabled. | Ensure Ethernet cable is properly connected at both ends. Try a different cable. Verify the connected device is powered on and functioning. Check switch configuration if ports are managed. |
| Hidas verkon nopeus | Cable quality, network congestion, duplex mismatch. | Ensure Cat5e/6 cables are used for Gigabit speeds. Check for excessive network traffic. Verify duplex settings on connected devices match the switch. |
| FAULT LED is lit | Power input issue, internal hardware fault. | Check both power inputs (P1 and P2). If the issue persists, contact technical support. |
7. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Malli | IGS-801M |
| Portit | 8 x 10/100/1000Base-TX RJ45 |
| Tiedonsiirtonopeus | 1000 megabittiä sekunnissa |
| Käyttölämpötila | -40 °C - 75 °C (-40 °F - 167 °F) |
| Kotelo | IP30 Industrial Aluminum Case |
| Virransyöttö | Redundant DC (Voltage range typically 12-48V DC) |
| Mitat (P x L x K) | 1.1 x 9.7 x 6.5 tuumaa (noin) |
| Tuotteen paino | 1.04 puntaa (472 grammaa) |
| Valmistaja | PLANEETTI |
8. Takuu ja tuki
For detailed warranty information, please refer to the warranty card included with your product or visit the official Planet Technology websivusto. Takuuehdot voivat vaihdella alueittain ja tuotteittain.
For technical support, product inquiries, or service requests, please contact Planet Technology's customer support. You can typically find contact information on their official websivustolla tai tuotteen täydellisissä dokumentaatioissa.
Note: This manual provides general guidance. For comprehensive details and advanced configurations, please refer to the complete user manual available on the manufacturer's websivusto.
