Tärkeitä turvallisuusohjeita
Always read and understand all instructions before operating this band saw. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. Save these instructions for future reference.
- Käytä silmäsuojaimia: Always wear safety glasses or goggles that comply with ANSI Z87.1.
- Käytä kuulonsuojaimia: Pitkäaikainen altistuminen melulle voi aiheuttaa kuulovaurioita.
- Pukeudu oikein: Älä käytä löysiä vaatteita, käsineitä, solmioita, sormuksia, rannekoruja tai muita koruja, jotka voivat tarttua liikkuviin osiin. Kiinnitä pitkät hiukset.
- Pidä työalue puhtaana: Sotkuiset alueet ja penkit kutsuvat onnettomuuksiin.
- Vältä vaarallista ympäristöä: Älä käytä sähkötyökaluja kohdassa damp tai märkiä paikkoja tai altista ne sateelle. Pidä työalue hyvin valaistuna.
- Pidä lapset loitolla: Kaikki vierailijat tulee pitää turvallisen välimatkan päässä työalueelta.
- Käytä oikeaa työkalua: Älä pakota työkalua tai lisälaitetta tekemään työtä, johon sitä ei ole suunniteltu.
- Huolla työkaluja huolellisesti: Pidä työkalut terävinä ja puhtaina parhaan ja turvallisen suorituskyvyn saavuttamiseksi. Voitele ja vaihda lisävarusteita.
- Katkaise virta: Always disconnect the power cord before making adjustments, changing accessories, or servicing the tool.
- Työkappaleen kiinnitys: Käytä aina clamptai ruuvipenkkiä työkappaleen pitämiseen. Tämä on turvallisempaa kuin käden käyttö ja vapauttaa molemmat kädet työkalun käyttämiseen.
- Tarkista vaurioituneiden osien varalta: Ennen kuin käytät työkalua jatkossa, suojus tai muu vahingoittunut osa on tarkastettava huolellisesti, jotta voidaan varmistaa, että se toimii kunnolla ja suorittaa aiottua tehtävää.
Asennus ja kokoonpano
The Delta 28-400 band saw requires assembly before use. It is recommended to have assistance during assembly due to the weight and size of the components.
1. Pakkauksen purkaminen ja tarkastus
Carefully remove all components from the packaging. Inspect for any shipping damage. Ensure all parts listed in the packing list are present. The saw, stand, 4-inch dust port, and a 93-1/2 inch blade are included.
Figure 1: The Delta 28-400 Band Saw fully assembled on its stand.
2. Jalustan kokoonpano
Assemble the heavy-duty steel stand according to the instructions provided in the separate stand manual. Ensure all bolts are securely tightened. The stand provides a stable base for the band saw.
3. Mounting the Saw to the Stand
With assistance, carefully lift the band saw body and place it onto the assembled stand. Secure it using the provided hardware. Ensure the saw is level and stable on the stand.
4. Blade Installation and Tensioning
- Avaa ylä- ja alapyöräsuojukset.
- Loosen the blade tension knob to allow for blade installation.
- Carefully place the blade around the upper and lower rubber-coated wheels, ensuring the teeth are pointing downwards towards the table.
- Adjust the blade tracking so the blade runs centrally on the wheels.
- Apply appropriate blade tension using the tensioning system. While there isn't a specific tension indicator, ensure the blade is taut enough to prevent twisting during operation.
Kuva 2: Sisäinen view showing the upper and lower wheels, and the blade path. This area is critical for blade installation and tracking adjustments.
5. Blade Guide Adjustment
Proper blade guide adjustment is crucial for accurate cuts and blade longevity. The saw features upper and lower blade guides.
- Adjust the upper blade guide assembly so it is approximately 1/8 inch above the workpiece.
- Ensure the side guides are set close to the blade, but not touching, allowing the blade to run freely.
- Adjust the thrust bearing (rear guide bearing) so it is just behind the blade, providing support during cutting without constant contact.
Kuva 3: Lähikuva view of the blade and guide bearings, illustrating the components involved in supporting the blade during operation.
6. Table Adjustment
The precision ground cast iron table can tilt from 3° left to 45° right, with a positive stop at 90° for straight cuts.
- Löysää pöydän lukitusnuppia.
- Tilt the table to the desired angle. Use a protractor or angle gauge for precise settings if not using the 90° stop.
- Kiristä pöydän lukitusnuppi tiukasti ennen käyttöä.
Figure 4: The band saw table set at a 90-degree angle, ideal for standard straight cuts.
Figure 5: The band saw table tilted to the right, demonstrating its miter capability for angled cuts.
Figure 6: The band saw table tilted to the left, showing the full range of angle adjustments.
7. Virtaliitäntä ja äänenvoimakkuustage Valinta
The 1 HP TEFC motor can operate on either 115V or 230V. Ensure the motor is wired correctly for your power supply. Consult a qualified electrician if you are unsure about wiring for 230V. Always ensure the power switch is in the OFF position before connecting to power.
8. Pölynkeräys
Connect a dust collection system to the 4-inch dust port to maintain a clean work environment and improve visibility. The saw's design includes effective dust collection features.
Käyttöohjeet
Before operating, ensure all safety checks are performed, including blade tension, tracking, guide settings, and table angle.
1. Virta päälle / pois
To start the saw, press the green "ON" button. To stop, press the red "OFF" button. Always allow the blade to reach full speed before beginning a cut.
2. Nopeuden valinta
The band saw offers two speeds: 1,620 FPM (Feet Per Minute) and 3,340 FPM. The lower speed is suitable for cutting non-ferrous metals, while the higher speed is for woodworking. Change speeds by adjusting the belt on the two-speed pulley system. Refer to the motor compartment for detailed instructions on changing belt positions.
3. Leikkauksen tekeminen
- Ensure the workpiece is free of foreign objects (nails, screws).
- Adjust the upper blade guide to be approximately 1/8 inch above the workpiece.
- Pidä työkappaletta tukevasti pöytää vasten.
- Feed the workpiece slowly and steadily into the blade. Do not force the cut.
- Use a push stick for small pieces or when hands are close to the blade.
- For curved cuts, use a narrower blade and feed slowly, allowing the blade to follow the curve without twisting.
Huolto
Regular maintenance ensures the longevity and safe operation of your Delta 28-400 band saw. Always disconnect power before performing any maintenance.
1. Puhdistus
- After each use, clear sawdust and debris from the table, blade guides, and inside the wheel covers.
- Use a brush or vacuum cleaner. Do not use compressed air as it can force dust into bearings.
- Keep the motor vents clear of dust to prevent overheating.
2. Terän vaihto
Replace dull or damaged blades promptly. Follow the blade installation steps in the Setup section. Ensure the new blade is the correct length (93-1/2 inches) and width for your application.
3. Wheel and Bearing Inspection
- Periodically inspect the rubber tires on the upper and lower wheels for wear or damage. Replace if necessary.
- Check the blade guide bearings for smooth operation. Replace any bearings that are seized or excessively worn.
4. Table Surface Care
Keep the cast iron table clean and apply a rust preventative or paste wax periodically to maintain its smooth surface and prevent corrosion.
Vianetsintä
Tässä osiossa käsitellään yleisiä ongelmia, joita saatat kohdata vannesahan kanssa.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Saha ei käynnisty | No power, tripped circuit breaker, faulty switch, incorrect voltage johdotus. | Check power connection, reset breaker, inspect switch, verify motor wiring (115V/230V). |
| Terä ajautuu tai leikkaa epätarkasti | Incorrect blade tension, improper blade tracking, worn blade guides, dull blade, base guide block movement. | Adjust blade tension and tracking, inspect and adjust/replace blade guides, replace dull blade. Ensure the base guide block is secure. |
| Liiallinen tärinä tai melu | Löysät osat, epätasapainoiset pyörät, kuluneet laakerit, väärä terän kireys. | Tarkista kaikki kiinnittimet, tarkista pyörien vauriot, vaihda kuluneet laakerit ja säädä terän kireys. |
| Terä katkeaa usein | Over-tensioning, improper blade tracking, forcing cuts, incorrect blade for material, worn blade guides. | Reduce blade tension, adjust tracking, avoid forcing cuts, use appropriate blade, check blade guides. |
| Moottori ylikuumenee | Blocked motor vents, continuous heavy use, incorrect voltage. | Clean motor vents, allow motor to cool, verify correct voltage johdotus. |
Tekniset tiedot
Key technical specifications for the Delta 28-400 Band Saw.
- Mallinumero: 28-400
- Moottori: 1 HP, 115V/230V, 1 Phase TEFC
- Blade Speeds: 1,620 FPM (low), 3,340 FPM (high)
- Terän pituus: 93-1/2 tuumaa
- Pöydän koko: 15 3/4 in. x 18 7/8 in. precision ground cast iron
- Pöydän kallistus: 3° left to 45° right (with positive stop at 90°)
- Pölyportti: 4 tuumaa
- Materiaali: Heavy-duty steel frame, aluminum trunnion, cast iron table
- Tuotteen paino: Noin 165 kiloa
- Tuotteen mitat: 45 x 18 x 21 inches (approximate, without stand)
- UPC: 847962004819
Takuu ja tuki
For warranty information, technical support, or to order replacement parts, please contact Delta Power Equipment Corporation directly. Refer to your purchase documentation or the official Delta websivustolta löydät ajankohtaisimmat yhteystiedot ja takuuehdot.
Ehdotus 65 Varoitus: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always follow safety guidelines and wear appropriate personal protective equipment.
Viralliset tuotevideot
No relevant official seller videos were provided for this product in the available data.
