Metra 99-3303

Metra 99-3303 ajoneuvoradion asennusohje

Malli: 99-3303

1. Johdanto

This manual provides detailed instructions for the proper installation and maintenance of your Metra 99-3303 Vehicle Radio Mount. This product is designed to facilitate the installation of an aftermarket single DIN or double DIN car stereo into specific vehicles, providing a factory-like finish and secure mounting. Please read all instructions carefully before beginning the installation process.

2. Turvallisuustiedot

  • Always disconnect the vehicle's negative battery terminal before starting any electrical installation to prevent short circuits and damage.
  • Varmista, että kaikki johdotusliitännät ovat tukevasti kiinni ja asianmukaisesti eristettyjä sähkövaarojen välttämiseksi.
  • Refer to your vehicle's service manual for specific dashboard disassembly and reassembly procedures.
  • If you are unsure about any part of the installation, consult a qualified professional installer.
  • Käytä asennuksen aikana asianmukaisia ​​suojavarusteita, kuten käsineitä ja silmäsuojaimia.

3. Pakkauksen sisältö

Verify that all components are present before beginning installation. The Metra 99-3303 kit typically includes:

  • Main Dash Bezel / Trim Panel
  • Radio Mounting Brackets (left and right)
  • Wiring Harness Adapter (vehicle-specific)
  • Antenna Adapter (if required for vehicle)
  • Hardware Pack (screws, clips, etc.)
Metra 99-3303 Vehicle Radio Mount Kit components

Kuva 1: This image displays the various components typically included in the Metra 99-3303 vehicle radio mount kit. It shows the main dash bezel, side mounting brackets, and a wiring harness adapter, designed to integrate an aftermarket radio into a vehicle's dashboard.

4. Tarvittavat työkalut

The following tools are generally required for installation:

  • Paneelin poistotyökalu
  • Phillips-ruuvimeisseli
  • Talttapäinen ruuvimeisseli
  • Johdonkuorijat/puristimet
  • Sähköteippi tai kutisteputki
  • Small Socket Set (optional, depending on vehicle)

5. Asennus ja asennus

Follow these general steps for installing the Metra 99-3303 radio mount. Specific vehicle disassembly steps may vary.

  1. Ajoneuvon valmistelu: Disconnect the negative battery terminal of your vehicle.
  2. Kojelaudan purkaminen: Carefully remove the factory dash trim panels and any necessary components to access the factory radio. Use a panel removal tool to avoid scratching surfaces.
  3. Factory Radio Removal: Unbolt and remove the factory radio from the dashboard. Disconnect all wiring harnesses and the antenna cable from the back of the radio.
  4. Mount Assembly (to Aftermarket Radio): Attach the Metra mounting brackets to your new aftermarket radio using the screws provided with the radio or the Metra kit. Ensure the radio is centered and flush with the front of the brackets.
  5. Johdotusliitännät: Connect the Metra wiring harness adapter to your aftermarket radio's wiring harness. Match wire colors (e.g., yellow to yellow for constant power, red to red for accessory power, black to black for ground). Solder or crimp connections for reliability and insulate them properly. Connect the antenna adapter if needed.
  6. Install Radio and Mount: Slide the assembled aftermarket radio and Metra mount into the vehicle's dash opening. Secure the mount using the factory mounting points or hardware provided.
  7. Testiliitännät: Before reassembling the dash, reconnect the vehicle's negative battery terminal. Turn on the vehicle and test the aftermarket radio's functionality (power, audio, balance, fader, radio reception, etc.).
  8. Dashboard Reassembly: Once all functions are verified, disconnect the battery again. Reinstall all removed dash panels and components in reverse order of removal. Reconnect the battery.

6. Käyttö

The Metra 99-3303 is a passive mounting solution. Its primary function is to securely house your aftermarket car stereo within the vehicle's dashboard, providing a stable and aesthetically integrated platform. Once installed, the operation of your car audio system will be governed by the features and controls of your aftermarket radio itself. The mount ensures that the radio is held firmly in place and that the dash retains a factory-like appearance.

7. Huolto

The Metra 99-3303 radio mount requires minimal maintenance:

  • Periodically inspect the mounting screws and connections to ensure they remain tight and secure.
  • Clean the visible surfaces of the dash kit with a soft, damp kangas. Vältä vahvoja kemikaaleja, jotka voivat vahingoittaa pintaa.
  • If any part of the mount becomes loose or damaged, address it promptly to prevent rattling or potential damage to the radio.

8. Vianmääritys

Most issues related to an aftermarket radio installation are typically electrical or related to the radio unit itself. However, if you encounter problems that might be related to the mount:

  • Löysä istuvuus/Halkeava: Ensure all mounting screws are tightened. Verify that the radio is properly seated within the mounting brackets and that the dash bezel is securely clipped into place.
  • Gaps Around Radio: Double-check that the radio is pushed fully into the mount and that the dash bezel is correctly aligned and snapped into the dashboard.
  • Radio ei käynnisty: While often a wiring issue, ensure the radio is fully seated and making proper contact with the wiring harness. Re-check all electrical connections.

For electrical or radio-specific issues, refer to your aftermarket radio's instruction manual or consult a professional.

9. Tekniset tiedot

  • Merkki: Metra
  • Mallinumero: 99-3303
  • Valmistajan osanumero: BTL5002-KV0586
  • Tuotteen paino: 1.5 paunaa (noin)
  • Paketin mitat: 14.06 x 12.03 x 12.02 tuumaa (arvioitu)
  • ASIN: B007W7Z8II
  • Yhteensopivuus: Designed for specific vehicle applications (refer to product packaging or Metra website for exact vehicle fitment).

10. Takuu ja tuki

Warranty information for Metra products is typically provided by the manufacturer and may vary. Please refer to the documentation included with your specific product or visit the official Metra website for the most current warranty details and support options. For technical assistance or inquiries regarding your Metra 99-3303 Vehicle Radio Mount, it is recommended to contact Metra customer support directly.

Metra Electronics: www.metraonline.com

Aiheeseen liittyvät asiakirjat - 99-3303

Preview Metra's EZ Order Applications Guide
A comprehensive guide to Metra's EZ Order applications, detailing vehicle compatibility and product part numbers for car audio installations. Includes information on the Metra Fit Guide app for iPhone and Android.
Preview Metra 99-8220 -asennusopas Toyota Tundraan ja Sequoiaan (2007-2011)
Vaiheittaiset asennusohjeet Metra 99-8220 -kojelaudan asennussarjalle, joka mahdollistaa jälkimarkkinoille tarkoitetun radion asennuksen Toyota Tundra 2007-2011 ja Toyota Sequoia 2008-2011 -ajoneuvoihin. Sisältää sarjan ominaisuudet, komponentit ja johdotuksen.
Preview Metra 99-6519 Installation Kit for Dodge Charger/Magnum 2005-2007
Detailed installation instructions for the Metra 99-6519 dash kit, enabling single-DIN, ISO-DIN, or DDIN radio installation in Dodge Charger and Magnum vehicles (2005-2007) without factory navigation. Includes kit features, components, tools required, and step-by-step assembly guides.
Preview Metra 99-7804 Asennusohjeet Honda Accordiin 2013-2017
Yksityiskohtainen asennusopas Metra 99-7804 -kojelautasarjan asennusohjeeseen, jonka avulla jälkimarkkinoilta tuleva radio asennetaan Honda Accordiin vuosimallia 2013–2017. Sisältää sarjan ominaisuudet, osat, purkamisen, valmistelun, kokoamisen, johdotuksen ja kosketusnäytön ohjeet.
Preview Metra 99-8164 Installation Instructions for Lexus RX300 (1999-2003)
Metra 99-8164 installation guide for 1999-2003 Lexus RX300, detailing the process of installing aftermarket car audio systems while retaining climate controls and providing wiring information.
Preview Metra 99-8271 Installation Instructions for Toyota 4-Runner (2010-up)
Comprehensive installation instructions for the Metra 99-8271 dash kit, designed for Toyota 4-Runner vehicles from 2010 onwards. Includes kit features, components, disassembly, preparation, and assembly steps for single and double DIN radios.