TELEVES 5232

Televes 5232 R-TV-erottimen SCATV-pistorasian käyttöohje

Model: 5232 | Brand: TELEVES

1. Johdanto

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Televes 5232 R-TV Separator SCATV Socket. Designed for efficient signal distribution, this socket ensures reliable connectivity for your television and radio systems. Please read this manual thoroughly before installation and use.

2. Turvallisuustiedot

Noudata aina seuraavia turvaohjeita laitteen vahingoittumisen ja itsesi loukkaantumisen välttämiseksi:

3. Tuote ohiview

3.1. Ominaisuudet

The Televes 5232 SCATV Separator Socket is engineered for robust performance and ease of installation. Key features include:

3.2. komponentit

The Televes 5232 socket consists of a metal mounting frame and a plastic cover plate with clearly marked TV and R (Radio) ports.

Televes 5232 SCATV R-TV Separator Socket, showing the white cover plate detached from the metal mounting frame.

Kuva 1: Päättynytview of the Televes 5232 SCATV R-TV Separator Socket, with its cover and mounting frame.

Takaosa view of the Televes 5232 metal mounting frame, showing internal connections and the model number.

Kuva 2: Yksityiskohtainen view of the metal mounting frame, highlighting the internal wiring terminals and model identification.

Edessä view of the white plastic cover plate for the Televes 5232 socket, featuring 'TV' and 'R' labels for the output ports.

Figure 3: Front cover plate of the socket, indicating the TV and Radio output ports.

4. Asennus ja asennus

Follow these steps for proper installation of your Televes 5232 SCATV R-TV Separator Socket:

  1. Valmistelu: Ensure the main power supply to the installation area is switched off. Prepare the coaxial cable by stripping the outer jacket, exposing the braiding (mesh), and the inner conductor. Ensure the inner conductor length is between 5-15 mm to prevent short circuits.
  2. Kaapeliliitäntä: Insert the prepared coaxial cable into the F-connector type guide on the metal mounting frame (refer to Figure 2). Use the quick and secure crimping mechanism to firmly fasten the cable. The flange with 3 rows of 9 mm teeth will ensure perfect mesh fastening.
  3. Kehyksen asennus: Secure the metal mounting frame into the wall box using appropriate screws.
  4. Attaching the Cover Plate: Once the frame is securely mounted and cables are connected, snap the white plastic cover plate onto the metal frame. Ensure it clicks into place firmly.
  5. Lopulliset liitännät: Connect your television to the port labeled 'TV' and your radio to the port labeled 'R' on the cover plate using appropriate coaxial cables.

After installation, restore power and test the signal reception on your connected devices.

5. Käyttöohjeet

The Televes 5232 SCATV R-TV Separator Socket is a passive device that requires no active operation. Once correctly installed and connected, it functions automatically to separate the incoming signal into TV and Radio outputs.

6. Huolto

The Televes 5232 SCATV R-TV Separator Socket requires minimal maintenance. To ensure its longevity and optimal performance:

7. Vianmääritys

If you experience issues with your Televes 5232 SCATV R-TV Separator Socket, refer to the following common problems and solutions:

OngelmaMahdollinen syyRatkaisu
No TV/Radio signalLoose cable connection, faulty cable, issue with the main antenna/signal source.Check all cable connections at the socket and to your devices. Ensure the main antenna or signal source is functioning correctly. Try replacing the coaxial cables.
Poor signal quality (e.g., snowy picture, static radio)Loose connections, damaged cables, external interference, weak input signal.Verify all connections are tight. Inspect cables for damage. Ensure the input signal strength is adequate. Consider using higher quality shielded cables.
Only one output (TV or Radio) workingFaulty cable connected to the non-working output, incorrect port usage.Ensure the correct device is connected to the 'TV' and 'R' ports. Test the cable connected to the non-working output with another device or replace it.

If the problem persists after trying these solutions, contact Televes customer support or a qualified technician.

8. Tekniset tiedot

Detailed technical specifications for the Televes 5232 R-TV Separator SCATV Socket:

8.1. Attenuation Values (dB)

The following table provides the typical attenuation values for different frequency bands:

Technical specification table for Televes 5232, showing attenuation values in dB for various frequency bands including TV, FM, VHF, UHF, and IF SAT.

Figure 4: Technical table detailing attenuation (Tłumienie) in dB across various frequency bands (Pasmo) for the Televes 5232.

LähtöBändi(MHz)Vaimennus (dB)
TV (Male IEC)TV5...65<8 (K.Zwrt. FM)
TV (Male IEC)TV-0.5 (TV)
FM (Female IEC)FM-3 (FM)
TV (Male IEC)UHF470...8620.5 (UHF)

Note: Values are typical and may vary slightly depending on installation conditions.

9. Takuu ja tuki

For warranty information, please refer to the terms and conditions provided by your retailer or the official Televes website. If you require technical assistance or have questions regarding the Televes 5232 SCATV R-TV Separator Socket, please contact your point of purchase or Televes customer support.

Televes Contact Information: Vieraile www.televes.com for regional contact details and support resources.

Aiheeseen liittyvät asiakirjat - 5232

Preview Televes PreampLifier-liitännät: Mallit 560383 ja 560483 Asennusopas
Opas, jossa yksityiskohtaisesti kuvataan Televes 560383 (yksi tulo) ja 560483 (kaksi tuloa) antenniesivahvistimen liitäntäasetukset.ampelevaattorit, joissa on mastoon asennettu yksikkö ja sisäkäyttöön tarkoitettu virtalähde/jakaja.
Preview Televes valkoinen maski RJ45-liittimellä TV/R-SAT + DATA -laitteille
Kattava tuote-esite Televesin valkoisesta maskista, jossa on kaksi TV/R-SAT-liitintä ja integroitu RJ45 (Cat. 6) -datapistoke. Tiedot sisältävät fyysiset tiedot, erottavat ominaisuudet, pakkaustiedot ja vaiheittaisen asennusoppaan.
Preview Televes EuroSwitch 719502: 5-tuloinen, 6-lähtöinen monikytkin satelliitti- ja maanpäälliseen televisioon
Tutustu Televes EuroSwitch 719502 -kytkimeen, kompaktiin monikytkimeen, joka on suunniteltu tehokkaaseen satelliitti- ja maanpäällisen televisiosignaalin jakeluun suurissa asennuksissa. Siinä on 5 tuloa, 6 lähtöä, pienet signaalihäviöt ja TForce-tekniikka optimaaliseen maanpäällisen signaalin vastaanottoon.
Preview Televes Mini-Repartidor EasyF 2D: Installation and Features
Discover the Televes Mini-Repartidor EasyF 2D, a compact 2-way SMATV signal splitter. Learn about its innovative EasyF connection system, ease of installation, and electrical performance benefits.
Preview Televes QSD85 85x95cm alumiininen satelliittiantenni - Ominaisuudet ja tekniset tiedot
Kattava ohiview Televes QSD85 85x95cm alumiinisesta satelliittiantennista, jossa kuvataan sen tärkeimmät ominaisuudet, fyysiset ja tekniset tiedot, pakkaus ja asennusopas optimaalisen satelliittisignaalin vastaanoton varmistamiseksi.
Preview Televes 2xUHF-mastopääte Amplife-laitteet (LTE/4G) - mallit 536020 ja 536021
Tekniset tiedot, asennusohjeet ja tuotteen tiedotview Televes 2xUHF-mastonhuippuun amplifeers (LTE/4G), mallit 536020 ja 536021. Ominaisuuksiin kuuluu integroitu LTE-suodatus signaalille amplifiointi ja jakelu.