Deca 300300 Matic 116 Perinteinen Elektroninen Akkulaturi Käyttöohje

1. Johdanto

This manual provides comprehensive instructions for the safe and efficient use of your Deca 300300 Matic 116 traditional electronic battery charger. Please read all instructions carefully before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Turvallisuustiedot

Noudata aina seuraavia turvaohjeita akkulaturia käyttäessäsi:

• Sähköturvallisuus: Varmista, että laturi on kytketty maadoitettuun pistorasiaan. Älä käytä laturia, jos johdot tai pistokkeet ovat vaurioituneet. Vältä kosketusta veden tai märkien pintojen kanssa.
• Räjähtävät kaasut: Batteries can produce explosive gases during charging. Ensure adequate ventilation in the charging area. Avoid open flames, sparks, and smoking near the battery.
• Silmien ja ihon suojaus: Wear appropriate eye protection (safety glasses) and protective clothing when working with batteries. Battery acid is corrosive.
• Lapset ja luvaton henkilökunta: Keep the charger and battery out of reach of children. Do not allow untrained individuals to operate the charger.
• Akun yhteensopivuus: Only charge 12V lead-acid batteries (wet, AGM, gel) within the specified capacity range (5 Ah to 90 Ah). Do not attempt to charge non-rechargeable batteries or batteries with different voltages.
• Ilmanvaihto: Ensure the charger itself has adequate ventilation during operation to prevent overheating.
• Yhteyden katkaiseminen: Always disconnect the AC power from the charger before disconnecting the battery clamps.

3. Tuote ohiview

The Deca 300300 Matic 116 is a traditional electronic battery charger designed for 12V lead-acid automotive batteries. It features electronic control for charging current, automatic charge termination, and an automatic reset function. The charger is supplied with clamp connectors for easy attachment to battery terminals.

3.1. Charger Components

Kuva 1: Edessä view of the Deca 300300 Matic 116 Battery Charger. This image shows the black, rectangular electronic battery charger with an integrated handle on top. The front panel features a prominent yellow and red label displaying 'MATIC 116', 'ELECTRONIC BATTERY CHARGER', '12V', 'min 5Ah', 'MAX 90Ah', and the 'deca' logo. To the left of the label are three LED indicators: a red LED (top) for error/reverse polarity, a yellow LED (middle) indicating charging ('CHARGE'), and a green LED (bottom) indicating charge complete ('OK'). Icons representing car and van batteries are also visible on the label.

The front panel includes indicator lights to show the charging status:

• Punainen LED: Indicates an error, such as reverse polarity connection or a faulty battery.
• Yellow LED (CHARGE): Illuminates when the battery is actively charging.
• Vihreä LED (OK): Illuminates when the battery is fully charged and the charging process has terminated.

4. Asennus

Follow these steps to set up your Deca 300300 Matic 116 charger:

1. Valmistelu: Ensure the battery is clean and free of corrosion on its terminals. If charging a wet lead-acid battery, check the electrolyte level and top up with distilled water if necessary, following the battery manufacturer's instructions.
2. Ilmanvaihto: Place the battery and charger in a well-ventilated area.
3. Yhdistä Clamps:
   • Yhdistä punainen (+) clamp kohtaan positiivinen (+) napa akun.
   • Yhdistä musta (-) clamp kohtaan negatiivinen (-) napa akun.

   Tärkeää: Ensure correct polarity. Reverse polarity will trigger the red error LED.
4. Liitä virtalähteeseen: Plug the charger's power cord (CEE 7/16 Europlug) into a standard 230V AC, 50/60 Hz grounded electrical outlet.

5. Käyttöohjeet

Once the charger is set up and connected, it will automatically begin the charging process:

1. Aloita lataus: After connecting to the battery and power, the charger will automatically detect the battery and start charging. The yellow 'CHARGE' LED will illuminate.
2. Näytön lataus: Allow the charger to operate until the green 'OK' LED illuminates. This indicates that the battery is fully charged and the charger has automatically terminated the charging process.
3. Charge Termination: The electronic control system ensures that the battery is not overcharged. Once the 'OK' LED is lit, the charger maintains the battery at an optimal level.
4. Yhteyden katkaiseminen:
   • First, unplug the charger from the AC power outlet.
   • Next, disconnect the black (-) clamp from the battery's negative terminal.
   • Finally, disconnect the red (+) clamp from the battery's positive terminal.

6. Huolto

Regular maintenance ensures the longevity and optimal performance of your charger:

• Puhdistus: Disconnect the charger from both AC power and the battery before cleaning. Wipe the exterior of the charger with a dry or slightly damp kangas. Älä käytä vahvoja kemikaaleja tai liuottimia.
• Kaapeli ja Clamp Tarkastus: Periodically inspect the power cord, charging cables, and clampTarkista, ettei niissä ole merkkejä vaurioista, rispaantumisesta tai korroosiosta. Vaihda vaurioituneet osat välittömästi.
• Varastointi: Säilytä laturia viileässä ja kuivassa paikassa, kun sitä ei käytetä. Pidä se poissa suorasta auringonvalosta, kosteudesta ja äärimmäisistä lämpötiloista.

7. Vianmääritys

If you encounter issues with your Deca 300300 Matic 116 charger, refer to the following table:

8. Tekniset tiedot

Key technical specifications for the Deca 300300 Matic 116 charger:

• Merkki: Deca
• Mallinumero: 300300
• Virtalähde: 1-vaiheinen - 230 V - 50/60 Hz
• Tulo Voltage: 230 volttia (AC)
• Akku Voltage: 12 V
• Average Charging Current: 4 A
• Yhteensopivat akkutyypit: Lead-acid (wet, AGM, gel)
• Akun kapasiteetti: 5 Ah (minimum) to 90 Ah (maximum)
• Pistoketyyppi: CEE 7/16 Europlug
• Valmistaja: Deca SPA

9. Takuu ja tuki

Information regarding specific warranty terms for the Deca 300300 Matic 116 is not available in this manual. For warranty claims, technical support, or spare parts inquiries, please contact your retailer or the manufacturer directly. Information on spare parts availability and software updates is not provided.