Technoline KT 300 Digitaalinen 3-hälytyksen keittiöajastin Käyttöohje

1. Johdanto

Thank you for choosing the Technoline KT 300 Digital 3-Alarm Kitchen Timer. This versatile device is designed to assist you with precise timing in various applications, including cooking, laboratory work, sports, and industrial tasks. It features three independent countdown timers, a clock function, and multiple mounting options for convenience. Please read this manual thoroughly to ensure proper setup and operation of your timer.

2. Tuote ohiview

Kuva: Edessä view of the Technoline KT 300 timer, displaying three independent countdown timers and control buttons.

Tärkeimmät ominaisuudet:

• Three independent countdown timers with individual alarms.
• Countdown range: 1 second to 19 hours, 59 minutes, 59 seconds.
• Integrated quartz clock with 12/24 hour display option.
• Memory function for frequently used timer settings.
• Versatile mounting options: wall mount, table stand, or magnetic attachment.
• Large, clear digital display.

Painikkeiden toiminnot:

• T1, T2, T3 (Left Side): Selects the respective timer for setting or viewing.
• ST/SP MEMORY (Right Side): Starts/Stops the selected timer; long press activates memory function.
• CLEAR (Right Side): Resets the selected timer to zero.
• CLOCK TIMER (Right Side): Toggles between clock display and timer display mode.
• HR (Bottom): Adjusts hours for clock or timer setting.
• MIN (Bottom): Adjusts minutes for clock or timer setting; also toggles 12/24 hour format in clock setting mode.
• SEC (Bottom): Adjusts seconds for clock or timer setting.

3. Asennus

3.1 Akun asennus

1. Paikanna ajastimen takaa oleva paristolokero.
2. Avaa paristolokeron kansi.
3. Aseta kaksi (2) AAA-paristoa paristolokeroon varmistaen oikean napaisuuden (+/-) lokeron sisällä olevien merkkien mukaisesti.
4. Sulje paristolokeron kansi kunnolla.

The timer will power on automatically once batteries are installed.

3.2 Sijoitteluvaihtoehdot

• Pöydässä seisova: Extend the integrated stand on the back of the timer to place it on a flat surface.
• Magnetic Holding: The timer features magnets on its back for attachment to metallic surfaces, such as a refrigerator door.
• Seinäasennus: Use the hanging hole on the back of the timer to mount it on a wall hook or screw.

4. Käyttöohjeet

4.1 Kellon asettaminen

1. Paina KELLO AJASTIN button to switch to clock display mode.
2. Paina ja pidä painettuna KELLO AJASTIN button for approximately 3 seconds until the hour digits begin to flash.
3. Käytä HR, MIN, ja SEC painikkeita asettaaksesi nykyisen ajan.
4. While setting minutes, press the MIN button to toggle between 12-hour and 24-hour display formats.
5. Paina KELLO AJASTIN again to confirm the setting and exit clock setting mode.

4.2 Setting and Using Timers (T1, T2, T3)

1. Paina KELLO AJASTIN button to ensure you are in timer display mode.
2. Select the desired timer (T1, T2, or T3) by pressing the corresponding button on the left side of the timer. The selected timer's display will be active for setting.
3. Käytä HR, MIN, ja SEC buttons to set the desired countdown time. Each press increments the value; hold to fast-advance.
4. Aloita lähtölaskenta painamalla ST/SP MEMORY button. The timer will begin counting down.
5. Voit keskeyttää lähtölaskennan painamalla ST/SP MEMORY -painiketta uudelleen. Jatka painamalla sitä uudelleen.
6. To clear a timer setting, press the TYHJENNÄ button while the timer is stopped or counting down. This will reset the selected timer to 00:00:00.
7. When a timer reaches zero, an alarm will sound. Press any button to stop the alarm.

4.3 Muistitoiminto

The timer can store a frequently used countdown setting for quick recall.

1. Set a desired time for any timer (T1, T2, or T3) as described in section 4.2.
2. While the timer is stopped and displaying the desired time, press and hold the ST/SP MEMORY button for approximately 3 seconds. The display will indicate that the setting has been saved to memory.
3. To recall the saved memory setting, select the desired timer (T1, T2, or T3), then briefly press the ST/SP MEMORY button while the timer is at 00:00:00 or cleared. The saved time will appear.

5. Huolto

5.1 Puhdistus

To clean your timer, wipe it with a soft, slightly damp liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia äläkä upota laitetta veteen.

5.2 Pariston vaihto

When the display becomes dim or the timer functions erratically, it is time to replace the batteries. Follow the battery installation steps in section 3.1. Always replace both AAA batteries simultaneously with new ones.

6. Vianmääritys

• Timer not turning on or display is blank: Check if batteries are inserted correctly with the right polarity. Replace with fresh AAA batteries.
• Timer not counting down/up: Ensure the timer is not paused. Press ST/SP MEMORY to start. Verify a time has been set.
• Hälytys on liian hiljainen: Ensure the timer is placed in an area where the alarm can be heard. The alarm volume is fixed.
• Väärä aika näytettynä: Re-set the clock following the instructions in section 4.1.

If problems persist, please refer to the warranty and support information.

7. Tekniset tiedot

8. Takuu ja tuki

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the documentation included with your purchase or contact your retailer. For technical support or further assistance, please reach out to the Technoline customer service department or the point of purchase.

For more information, you may visit the official Technoline websivustolta tai ota yhteyttä paikalliseen jälleenmyyjään.