Tärkeitä turvallisuustietoja
Read, understand, and follow all instructions carefully before installing and using this product. Failure to do so may result in serious injury or property damage. This pool is intended for above-ground use only. Do not set up the pool on a slope or uneven surface.
- Aikuisten valvonta: Always supervise children and individuals with disabilities.
- Veden syvyys: The pool has a water depth of 24 inches.
- Sähköturvallisuus: Ensure all electrical connections, especially for the filter pump, are connected to a Ground-Fault Circuit Interrupter (GFCI) outlet.
- Kemiallinen käsittely: Käsittele uima-allaskemikaaleja varoen ja noudata valmistajan ohjeita.
- Ei sukellusta: Älä sukella tai hyppää uima-altaaseen.
Komponenttiluettelo
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact Intex customer support.
- Pool Liner (1)
- Horizontal Frame Bars (Quantity as per model)
- Vertical Frame Legs (Quantity as per model)
- T-Joint Connectors (Quantity as per model)
- Filter Pump (1)
- Suodatinpatruuna (1)
- Letkut ja Clamps for Filter Pump (Set)
- Tyhjennystulppa (1)
Asennusohjeet
1. Sivuston valmistelu
Select a firm, level surface for your pool. The area should be free of sharp objects, debris, and excessive vegetation. Consider sun exposure, proximity to a power outlet for the pump, and drainage. A ground cloth or tarp is recommended beneath the pool liner for added protection.
Image: Visual guide for the three main steps of pool setup: preparing the ground, assembling the frame, and filling the pool.
2. Altaan kokoaminen
- Unfold the pool liner and lay it flat on the prepared, level ground. Ensure the drain plug is closed.
- Identify the horizontal frame bars and T-joint connectors. The horizontal bars are generally larger in diameter than the vertical legs.
- Slide the horizontal bars through the sleeves at the top edge of the pool liner.
- Connect the horizontal bars using the T-joint connectors. Start at one end and work your way around the pool. The final T-joint connection may require additional effort due to tension; assistance from another person is recommended.
- Insert the vertical support legs into the bottom of each T-joint connector. Ensure they are securely seated and the pool frame is stable.
Image: An assembled Intex Metal Frame Pool, showing the blue liner and white support frame before water is added.
3. Suodatinpumpun liitäntä
Connect the filter pump to the designated inlet and outlet ports on the pool liner using the provided hoses and clamps. Ensure all connections are tight to prevent leaks. Before starting the pump, ensure it is filled with water to purge any air.
Image: The Krystal Clear Cartridge Filter Pump, illustrating its connection points for the pool hoses.
4. Altaan täyttö
Begin filling the pool with water. As the water level rises, smooth out any wrinkles in the bottom of the liner by walking gently across the pool floor. Stop filling when the water reaches the recommended fill line, typically just below the top horizontal bar.
Käyttöohjeet
1. Suodatinpumpun toiminta
The included Krystal Clear™ Cartridge Filter Pump (Model C330) is designed to circulate and filter the pool water. It pumps 330 gallons (1,249 L) per hour. Operate the pump for 2-10 hours daily, depending on usage and water clarity, to maintain optimal filtration. Always ensure the pump is connected to a 110-120 voltage GFCI outlet.
Image: Features of the Krystal Clear Cartridge Filter Pump C330, highlighting its flow rate and maintenance benefits.
2. Veden kemia
Maintaining proper water chemistry is essential for a clean and safe pool. Regularly test your pool water using a DPD test kit for chlorine and pH levels. Adjust chemicals as needed:
- Kloori: Use liquid chlorine (bleach) or stabilized chlorine tablets in a floater. Sunlight breaks down unstabilized chlorine, so stabilizer may be needed.
- pH: Use muriatic acid to lower pH or soda ash to raise pH.
- stabilointiaine: If using unstabilized chlorine, add cyanuric acid (stabilizer) to protect chlorine from UV degradation.
3. Hydro Aeration Technology
This pool features Hydro Aeration Technology, which enhances water quality through:
- Advanced Circulation: Injecting air into the water accelerates circulation, causing fine particles to cluster for more effective filtration.
- Improved Clarity: Aeration removes minerals through oxidation, leading to clearer water.
- Increased Freshness: More negative ions are generated by activating air bubbles, improving overall air quality around the pool.
Image: Diagram of Hydro Aeration Technology, showing how air injection improves water circulation and filtration.
Huolto
1. Säännöllinen puhdistus
- Kuoriminen: Use a pool net to regularly remove leaves, insects, and other debris from the water surface.
- Imurointi: Imuroi altaan pohja säännöllisesti poistaaksesi siihen kertyneet roskat.
- Suodatinpatruuna: Clean the filter cartridge regularly by rinsing it with a garden hose. Replace the cartridge every two weeks or when it remains dirty after cleaning.
2. Talvivalmistelu
At the end of the swimming season, properly prepare your pool for winter storage to prolong its lifespan:
- Drain the pool completely.
- Clean and dry the pool liner and all frame components thoroughly.
- Disassemble the frame and store all parts in a dry, protected area, away from extreme temperatures.
- Store the filter pump indoors in a dry, temperature-controlled environment.
Vianetsintä
This section addresses common issues you might encounter with your Intex Metal Frame Pool.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Vesi on sameaa | Riittämätön suodatus, virheellinen kemiallinen tasapaino, suuri orgaaninen kuormitus | Run filter pump longer, backwash/clean filter, test and adjust chemicals (chlorine, pH), shock treat pool. |
| Pumppu ei käy | Power issue, clogged impeller, airlock | Check GFCI outlet, ensure power is connected, clean impeller, prime pump to remove air. |
| Vesi vuotaa liitoksista | Löysä clamps, worn O-rings, damaged hoses | Kiristä letku clamps, tarkasta ja vaihda O-renkaat/tiivisteet, vaihda vaurioituneet letkut. |
| Pool liner damage | Puncture, tear | Use an Intex repair patch kit to fix small holes. For large tears, contact customer support. |
Tekniset tiedot
Image: The Intex Metal Frame Pool in use, illustrating its size and design.
Kuva: Yksityiskohtainen view of the 3-Ply Durable Material, emphasizing its robust construction.
- Malli: 56998EG
- Allastyyppi: Metal Frame Above Ground Pool
- Muoto: Pyöristää
- Mitat: 10-Feet (Diameter) x 30-Inch (Height) / 120"L x 120"W x 30"H
- Vesikapasiteetti (90%): 1,185 litraa (4,485 litraa)
- Veden syvyys: Noin 24 tuumaa (60.96 cm)
- Materiaali: Durable 3-Ply PVC and Metal Frame
- Mukana tulevat komponentit: Filter Pump (Krystal Clear C330)
- Suodatinpumpun virtausnopeus: 330 GPH (1,249 LPH)
- Asennus vaaditaan: Kyllä
- Tuotteen paino: 44.66 puntaa (20.25 kg)
Takuutiedot
This Intex Metal Frame Pool Set comes with a 90 päivän rajoitettu takuu. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your product or visit the official Intex websivusto.
Asiakastuki
For further assistance, missing parts, or technical support, please contact Intex customer service. Contact information can typically be found in the product packaging or on the official Intex websivusto.
