Johdanto
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the Testo 400563 4354 IAQ Kit. This device is designed for simple and intuitive operation for reading, saving, and analyzing ventilation and indoor air quality parameters, including Relative Humidity (RH), Temperature, Carbon Dioxide (CO2), and Barometric Pressure.
Turvallisuustiedot
Please read this section carefully before operating the device. Failure to comply with these instructions may result in injury or damage to the instrument.
- Always operate the device within its specified operating temperature and humidity ranges.
- Do not expose the device to extreme temperatures, direct sunlight, or corrosive environments.
- Vältä laitteen pudottamista tai altistamista voimakkaille iskuille.
- Only use specified batteries and dispose of them properly.
- Älä yritä avata tai korjata laitetta itse. Jätä kaikki huoltotyöt pätevän henkilöstön tehtäväksi.
- Pidä laite puhtaana ja puhtaana pölystä ja roskista.
Tuote loppuview
The Testo 400563 4354 IAQ Kit is a versatile instrument for environmental measurements. Familiarize yourself with its components:
Kuva 1: Testo 435-4 IAQ Meter. This image displays the handheld meter, featuring a large digital display at the top showing readings like "1037 ppm" and "934.4 m³/h". Below the screen are several control buttons: three orange circular buttons at the top, followed by two grey arrow buttons (up and down), another grey circular button, and finally a power button with a power symbol. The device has a sleek, ergonomic design with a black body and silver-colored accents.
Tärkeimmät komponentit:
- Näyttö: Large LCD for clear reading of measurement values and menu navigation.
- Ohjauspainikkeet: Intuitive buttons for power, navigation, selection, and function activation.
- Anturin tulo: Port for connecting various probes (e.g., CO2, humidity, temperature).
- Akkulokero: Located at the rear for power supply.
Asennus
1. Akun asennus:
- Paikanna laitteen takaosassa oleva paristolokeron kansi.
- Open the cover by sliding or unscrewing it (refer to specific model instructions if screws are present).
- Insert the required batteries (e.g., AA or AAA, typically 3 or 4) ensuring correct polarity (+/-).
- Sulje paristolokeron kansi kunnolla.
2. Mittapään liitäntä:
- Connect the desired measurement probe (e.g., CO2 probe, humidity/temperature probe) to the designated input port on the device.
- Ensure the connection is firm and secure to prevent inaccurate readings.
Käyttöohjeet
1. Virran kytkeminen päälle/pois:
- Käynnistä painamalla -painiketta pitkään Tehoa button (usually marked with Ⓢ), kunnes näyttö syttyy.
- Katkaise virta pitämällä -painiketta painettuna Tehoa -painiketta uudelleen, kunnes näyttö sammuu.
2. Mittausten ottaminen:
- Once powered on and a probe is connected, the device will typically display real-time measurements for the connected parameters (e.g., CO2 in ppm, Temperature in °C/°F, RH in %).
- Position the probe in the environment you wish to measure. Ensure proper air circulation around the sensor for accurate readings.
- Allow a few moments for readings to stabilize, especially for CO2 and humidity.
3. Navigating Menus and Saving Data:
- Käytä Ylös/alas arrow buttons to navigate through different measurement modes or menu options.
- Paina Enter/OK button (often a central circular button) to select an option or confirm a setting.
- To save a measurement, look for a Tallentaa or Muisti button/option. Follow the on-screen prompts to store data.
- To recall saved data, navigate to the Muisti or Muista valikkovaihtoehto.
Huolto
1. Puhdistus:
- Pyyhi laite casing pehmeällä, damp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Ensure no liquid enters the sensor openings or electrical connections.
- For probes, follow specific cleaning instructions provided with the probe itself.
2. Akun vaihto:
- Vaihda paristot, kun näytössä näkyy heikon pariston ilmaisin.
- Käytä aina uusia, määritetyn tyyppisiä paristoja.
- Hävitä vanhat paristot paikallisten määräysten mukaisesti.
3. Kalibrointi:
- Regular calibration is essential for maintaining measurement accuracy.
- Refer to the device's on-screen calibration menu or consult Testo's official support for recommended calibration intervals and procedures.
- Some probes may require specific calibration gases or humidity standards.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Laite ei käynnisty. | Tyhjät tai väärin asennetut paristot. | Tarkista paristojen napaisuus; vaihda paristot uusiin. |
| Epätarkkoja lukemia. | Sensor dirty, damaged, or out of calibration; improper probe connection. | Clean sensor; ensure probe is securely connected; perform calibration. |
| Näytössä näkyy "Virhe" tai "---". | Sensor malfunction; out of measurement range; internal error. | Check probe connection; move to an environment within measurement range; restart device; contact support if persistent. |
| Tietoja ei voida tallentaa. | Memory full; incorrect save procedure. | Delete old data; refer to operating instructions for saving data. |
Tekniset tiedot
The following specifications are for the Testo 400563 4354 IAQ Kit:
- Tuotetyyppi: CO2/Temp/RH/Barometric Meter
- Malli: 400563 4354
- Merkki: Testo
- Osanumero: AO-10382-23
- Paketin määrä: JOKAINEN
- Paketin mitat: 16.3 x 13 x 4.3 tuumaa; 8.2 puntaa
- ASIN: B00481RUUA
- Ensimmäisenä saatavilla: 18. heinäkuuta 2012
Note: Specific measurement ranges and accuracies depend on the probes used with the device. Refer to individual probe documentation for detailed specifications.
Takuu ja tuki
For warranty information, technical support, or service inquiries, please contact Testo customer service or visit their official websivusto.
Lisätietoja ja yhteystiedot löydät osoitteesta Testo-kauppa Amazonissa.
